6850-00-142-9810
SILICONE COMPOUND
6850-00-142-9810 (6850001429810, 001429810)
Part Numbers (4 listings): PST-597 | G-697 | MIL-C-21567 | DC-6COMPOUND |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| PST-597 | 3 - Design Control Reference | 1 - Incomplete Part Number | POLYSI TECHNOLOGIES INC | 03CA3 |  |
| G-697 | 3 - Design Control Reference | 1 - Incomplete Part Number | FOAM SEAL, INC. | 00CE9 | |
| G-697 | 5 - Replaced / Discontinued | 9 - No Longer Used | MOMENTIVE PERFORMANCE MATERIALS INC. | 01139 | |
| MIL-C-21567 | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY SPECIFICATIONS | 81349 |  |
| DC-6 COMPOUND | 5 - Replaced / Discontinued | 9 - No Longer Used | DOW CORNING CORPORATION | 71984 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 68 | 6850 | 001429810 | T089-A | 19690 | X | 1 | A | Y | A | 0 | 15 Jan 1969 |
T089-A
Federal Item Identification Guide (FIIG_4065)
19690
Item Naming Code (INC_4080)
15 Jan 1969
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
Y
Hazardous Material Indicator Code (HMIC_0865)
Indicates information is in the Hazardous Materials Information Resource System (HMIRS).
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2001 | |||||||||||||||||||||||||||||
| N9BG | N9GD | 1 | Z | Z | HD | GT | KE | HD | 1 May 2006 | |||||||||||||||||||||
| ZU01 | 1 Mar 2008 | |||||||||||||||||||||||||||||
| ZE01 | 1 Jul 2010 | |||||||||||||||||||||||||||||
| ZG01 | 1 Apr 2014 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
Z
Acquisition Method Suffix Code (AMSC_2876)
This part is a commercial/non-developmental/off-the-shelf-item. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 5 | ZZ | CJSFZ | V7  | G-697 | 00CE9 | | ||||
| 3 | 1 | 3 | ZZ | CRJJW | V5  | PST-597 | 03CA3 | | ||||
| 5 | 9 | 6 | CX | B | DC-6 COMPOUND | 71984 | | |||||
| 1 | 5 | 9 | 3 | CX | B | MIL-C-21567 | 81349 | | ||||
| 5 | 9 | E | CX | B | G-697 | 01139 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
CX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Richmond, Richmond, VA 23297-5000
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
CJSFZ
MSDS - Material Safety Data Sheets
CRJJW
MSDS - Material Safety Data Sheets
V7
HCC - Hazardous Characteristics Code (HCC_2579)
Environmental Hazard
V5
HCC - Hazardous Characteristics Code (HCC_2579)
High Flash Point Materials, OSHA IIIB
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | CX | 0 | 20 May 1974 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
CX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Richmond, Richmond, VA 23297-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
20 May 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HD | 604 | Z | 9 | A | C | Z | R | 090960 | X | 47860 | LUBRICATING-GREASE-NOI |
HD
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
604
Water Commodity Code (WRT_CMDTY_CD_9275)
Petroleum, Lubricating Grease (other than bulk)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
C
Air Commodity Code (AIR_CMTY_HDLG_9215)
Chemical corps items and all other chemicals not covered in other classifications. When chemical item (as indicated by the DOT Proper Shipping Name) is sensitive as defined in Appendix A Section I of DoD 4500.32-R, Volume I, second position must be from table 85, part 1.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
R
Less Than Truckload (CLAS_RTNG_CD_2770)
65
090960
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
47860
Uniform Freight Classification (UFC_CD_MODF_3040)
LUBRICATING-GREASE-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
H
Acquisition Advice Code (AAC_2507)
DIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
0
Quantity Unit Pack (QUP_6106)
No QUP
CN
Unit of Issue (UI_3050)
Can - A rigid receptacle made of fibre, metal, plastic or a combination thereof. Cans may be cylindrical or any number of irregular shapes. Restricted to items which cannot be issued in less than container quantity. Includes “pail” and “canister”. Do not use when the packaged quantity equates to a unit of measure, i.e., pint, quart, gallon, ounce or pound. *Requires a quantitive expression
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | Z | ZZZ | 40.0 lbs | 1.531 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ZZ | ZZ | ZZ | Z | ZZ | ZZ | ZZ | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
Z
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Special Requirements - See specific instructions or drawings provided.
ZZZ
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
40.0 lbs
Unit Pack Weight (UP_WT_5153)
1.531 cu ft
Unit Pack Cube (UP_CU_5155)
ZZ
Preservation Material Code (PRSRV_MAT_CD_5162)
Special requirement – See specific instructions or drawings provided
ZZ
Wrapping Material Code (WRAP_MAT_CD_5163)
Special requirements – see specific instructions or drawings provided
ZZ
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Special requirements. See specific instructions or drawings provided.
Z
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Special requirements-See specific instructions or drawings provided
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
ZZ
Intermediate Container Code (INTMD_CTNR_CD_5167)
Special requirement – See specific instructions or drawings provided.
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGZX | Basic Ingredient | SILICONE W/CORROSION INHIBITOR |
| AKKF | Quantity Within Each Unit Package | 50.0 POUNDS |
Back to TopBack to Top
