Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
280440 | 1 - Source of Control Reference | 2 - Production Item | VALCOR ENGINEERING CORP | 96487 | |
11403-1 | 3 - Design Control Reference | 2 - Production Item | QUANTIC INDUSTRIES, INC. | 10640 | |
7125 | 3 - Design Control Reference | 2 - Production Item | QUANTIC INDUSTRIES, INC. | 10640 | |
9393-1 | 3 - Design Control Reference | 2 - Production Item | QUANTIC INDUSTRIES, INC. | 10640 | |
843933 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE-FENWAL INC | 0KDP7 | |
280440 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE-FENWAL INC | 0KDP7 | |
1336-V647 | 6 - Informative Reference | 9 - No Longer Used | DEPARTMENT OF DEFENSE AMMUNITION | 99999 |
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
13 | 1336 | 006222407 | T190-A | 27118 | X | 1 | G | Y | A | 0 | 11 Jul 1971 |
Guided Missile Warheads and Explosive Components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
MLI (SME) — Demilitarization required AEDA. Demilitarization, and if required, declassification and/or removal of sensitive markings or information will be accomplished prior to physical transfer to a DRMO. This code will be used for all AEDA items, including those which also require declassification and/or removal of sensitive markings or information.
Indicates information is in the Hazardous Materials Information Resource System (HMIRS).
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
WN01 | 1 Feb 2006 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 2 | SB | 280440 | 96487 | |||||||
4 | 3 | 2 | 5 | SB | D | 11403-1 | 10640 | |||||
3 | 3 | 2 | 5 | SB | D | 7125 | 10640 | |||||
1 | 3 | 2 | 5 | SB | A | 9393-1 | 10640 | |||||
5 | 9 | 2 | SB | B | 280440 | 0KDP7 | ||||||
5 | 9 | 5 | SB | B | 843933 | 0KDP7 | ||||||
1 | 6 | 9 | 9 | SB | D | 1336-V647 | 99999 |
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
The reference number is of the type for which an indication of document availability is not required.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | SU | 0 | 21 Mar 1970 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SU |
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
DENN | Dot Identification Number | UN0276 |
SHPN | Dot Proper Shipping Name | CARTRIDGES, POWER DEVICE |
DDAC | Dod Ammunition Code | 1336-V647 |
DTRC | Dot Registration Code | EX1988100847 |
AGAV | End Item Identification | AGM-69A MISSILE SYSTEM |
ABPM | Body Diameter | 0.572 INCHES NOMINAL |
ADTV | Case Material | STEEL |
ATGC | Case Mounting Thread | INCLUDED |
ATGE | Case Threaded Electrical Connection | NOT INCLUDED |
ATGM | Charged End Diameter | 0.620 INCHES NOMINAL |
ATGK | Color Coded Feature | INCLUDED |
HUES | Color | BROWN |
AMPS | Current Rating In Amps | 3.5 |
AHVN | Detonation Initiation Method | ELECTRIC |
ATGJ | Explosive Power Rating | 325.000 FOOT-POUNDS |
GRWT | Gross Weight | 0.2 SHIPPING CONTAINER POUNDS AND 25002.0 PALLET POUNDS |
HMCC | Hazardous Material Classification Code | 1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION |
ATGD | Mounting Thread Series | UNF |
EXWT | Net Explosive Weight | 0.0017 STORAGE POUNDS AND 0.0017 TRANSPORTATION POUNDS |
ATGB | Integral Cutting Punch | NOT INCLUDED |
QTSC | Quantity Per Shipping Container | 1 |
ATGL | Rim | NOT INCLUDED |
ABHP | Overall Length | 1.560 INCHES NOMINAL |
ELEC | Voltage In Volts | 3.5 |
AAZK | Width Across Flats | 0.750 INCHES NOMINAL |
AQSX | Wrenching Facility | INCLUDED |
AARB | Terminal Type | PIN |
AAJD | Thread Class | 2A |
ABUJ | Thread Size | 0.500-20 |