1560-01-132-7286
COVER,ACCESS,AIRCRAFT
1560-01-132-7286 (1560011327286, 011327286)
Part Number (1 listing): 16B5513-32
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 16B5513-32 | 3 - Design Control Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 81755 |  |
| 16B5513-32 | 8 - NATO Reproduced Item | 2 - Production Item | TUSAS HAVACILIK VE UZAY SAN.A.S. | T0544 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
8 - NATO Reproduced Item
Reference Number Category Code (DRN_2910)
US/NATO-Reproduced Item Identification Number. A number representing a reproduction of an item of production by a NATO country (including the United States) for which authorization to use the NATO/National Stock Number has been granted by the originating country. The reproduced item represents the same item of production as the original item.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 15 | 1560 | 011327286 | A531H0 | 51575 | X | K | B | P | A | 0 | 3 Jun 1982 |
A531H0
Federal Item Identification Guide (FIIG_4065)
51575
Item Naming Code (INC_4080)
3 Jun 1982
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Nov 1994 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1996 | |||||||||||||||||||||||||||||
| ZB01 | 1 Nov 1999 | |||||||||||||||||||||||||||||
| ZU01 | 1 May 2006 | |||||||||||||||||||||||||||||
| WP01 | 1 Mar 2007 | |||||||||||||||||||||||||||||
| FUU4 | 1 | M | F | E | SU | FH | 7 Oct 2009 | |||||||||||||||||||||||
| N9I4 | 1 | M | 5 | G | GH | FH | GG | 7 Oct 2009 | ||||||||||||||||||||||
| ZT01 | 1 Nov 2013 | |||||||||||||||||||||||||||||
| FUGG | 1 | M | Z | SU | 1 Sep 2015 | |||||||||||||||||||||||||
| N9BG | 1 | M | Z | GH | GG | 1 Sep 2015 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
M
Acquisition Method Suffix Code (AMSC_2876)
Master or coordinated tooling is required to produce this part. This tooling is not owned by the Government or, where owned, cannot be made available to other sources. Valid AMCs: 1, 2, 3, 4, and 5.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
SU
Item Management Coding Activity (IMC_ACTY_2748)
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
5
Nonconsumable Item Material Support Code (NIMSC_0076)
Depot Reparable Component (Type II). This code identifies SICA managed depot reparable components assigned to another service which is responsible for the logistics functions of single submitter cataloger, acquisition and disposal authority, depot maintenance, and performs the wholesale stock, store, and issue functions and establishes, budgets, and funds the wholesale stock level requirement. Supply requirements will be submitted to the PICA on requisitions which are funded by a designated point within the SICA. Unserviceable SICA assets will normally be returned to the PICA for credit. The SICA will provide item/program data required by the PICA to meet the materiel support commitments. Normally, Military Interdepartmental Purchase Requests (MIPR) will not be requested by the PICA to support SICA NIMSC 5 requirements. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
G
Item Management Code (IMC_2744)
INVALID ITEM MANAGEMENT CODE - Field Level Reparable
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
FH DSOR
Depot Source of Repair Codes (DSOR_0903)
Ogden Air Logistics Center (OO-ALC), Hill AFB, UT
GG Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | SB | 16B5513-32 | 81755 | | ||||||
| 4 | 8 | 2 | 5 | 9Z | D | 16B5513-32 | T0544 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
8
Reference Number Category Code (RNCC_2910)
US/NATO-Reproduced Item Identification Number. A number representing a reproduction of an item of production by a NATO country (including the United States) for which authorization to use the NATO/National Stock Number has been granted by the originating country. The reproduced item represents the same item of production as the original item.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TU | 0 | 4 Sep 1988 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TU
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
4 Sep 1988
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SU | 576 | Z | 9 | A | V | Z | S | 013560 | A | 05690 | ALUM-PLATE-R-SHEET-SUB1 |
SU
Originating Activity Code (ORIG_ACTY_CD_4210)
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
S
Less Than Truckload (CLAS_RTNG_CD_2770)
60
013560
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
A
NMFC Sub Item Number (SUB_ITM_NBR_0861)
05690
Uniform Freight Classification (UFC_CD_MODF_3040)
ALUM-PLATE-R-SHEET-SUB1
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | 000 | 7.0 lbs | 28.1in x 15.1in x 4.4in | 1.080 cu ft | 3.0 lbs | 25.3in x 13in x 1.3in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | ZZ | ZZ | Z | ZZ | 00 | B | ZZ | A |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
7.0 lbs
Unit Pack Weight (UP_WT_5153)
28.1in x 15.1in x 4.4in
Unit Pack Size (UP_SZ_5154)
1.080 cu ft
Unit Pack Cube (UP_CU_5155)
3.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
25.3in x 13in x 1.3in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
ZZ
Wrapping Material Code (WRAP_MAT_CD_5163)
Special requirements – see specific instructions or drawings provided
ZZ
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Special requirements. See specific instructions or drawings provided.
Z
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Special requirements-See specific instructions or drawings provided
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
A
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Packaging is in accordance with a procedural specification or a SPI. The appropriate specification number will be shown in-the-clear in the supplemental data area.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ADPC | Distance From First Hole Centerline To End Along Length | 2.720 INCHES NOMINAL |
| ADPD | Distance From First Hole Centerline To End Along Width | 2.370 INCHES NOMINAL |
| ADPR | Body Thickness | 0.100 INCHES NOMINAL |
| ADPK | Corner Hole Centerline Radius | 0.125 INCHES NOMINAL |
| AAGR | Cross-Sectional Shape Style | FLAT |
| ADPA | Distance Between Hole Centerline And First Hole Along Length | 2.150 INCHES NOMINAL |
| ADPB | Distance Between Hole Centerline And First Hole Along Width | 1.810 INCHES NOMINAL |
| ADNY | Distance Between Holes Along Length | 0.580 INCHES NOMINAL |
| ADNZ | Distance Between Holes Along Width | 2.000 INCHES NOMINAL |
| ADNV | Hole Quantity Along Length | 18 |
| ADNW | Hole Quantity Along Width | 8 |
| MATT | Material | ALUMINUM ALLOY 2024 |
| ABRY | Length | 27.000 INCHES NOMINAL |
| ADQB | Securing Device Type | THREADED FASTENER |
| ABMW | Peripheral Shape Style | RECTANGLE, MULTI HOLES |
| FEAT | Special Features | RH UPPER STRAKE CENTER FUSELAGE |
| ABGL | Width | 14.000 INCHES NOMINAL |
Back to TopBack to Top
