- FSG 19 - Ships, Small Craft, Pontoons, and Floating Docks
- FSC 1940 - Small Craft
- NSN 1940-01-064-0253
1940-01-064-0253
CANISTER,BATTERY,PR
1940-01-064-0253 (1940010640253, 010640253)
Part Numbers (3 listings): 5550573-1 | 4592631-1 | 4592607ITEM6 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 5550573-1 | 1 - Source of Control Reference | 2 - Production Item | NAVAL SEA SYSTEMS COMMAND | 53711 |  |
| 4592631-1 | 3 - Design Control Reference | 2 - Production Item | NAVAL AIR WARFARE CENTER | 12934 |  |
| 4592607 ITEM 6 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL AIR WARFARE CENTER | 12934 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 19 | 1940 | 010640253 | A23900 | 77777 | Y | 4 | 1 | A | N | A | 0 | 16 Aug 1978 |
A23900
Federal Item Identification Guide (FIIG_4065)
77777
Item Naming Code (INC_4080)
16 Aug 1978
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
Y
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
1
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name does not exist.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N1H5 | 2 | C | GG | 1 Apr 1991 | ||||||||||||||||||||||||||
| ZK01 | 1 Mar 1997 | |||||||||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 1 | HD | 5550573-1 | 53711 | | ||||||
| 4 | 3 | 2 | D | HD | A | 4592631-1 | 12934 | | ||||
| 4 | 5 | 2 | 5 | HD | A | 4592607 ITEM 6 | 12934 | | ||||
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
D
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing. The drawing is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained, and under the security measures specified for the level of security classification assigned. The drawing will be furnished only to qualified requesters by the activity identified by the RNAAC. Descriptive data based on Limited Rights information will not be released to the general public through publications or other media.
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 16 Aug 1978 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
16 Aug 1978
Standardization Decision Date (DT_STDZN_DEC_2300)
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
AY
Unit of Issue (UI_3050)
Assembly - A collection of parts assembled to form a complete unit, constituting a single item of supply, e.g., hose assembly. Use only when the term “assembly” is a part of the item name.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
S
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC ND2: AF Equipment Management System (AFEMS); NAVY: Slow Demand Velocity Items (Consumables)
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | A | 52 | 1 | 000 |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | JA | GH | H | ED | 00 | O | 03 | E | Q | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
52
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
JA
Wrapping Material Code (WRAP_MAT_CD_5163)
A-A-3174, plastic sheet, polyolefin, 2 mil
GH
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
MIL-PRF-26514, Type I, Class 2, Grade C, flexible polyurethane foam, heavy load range
H
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
2 inches thick
ED
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
O
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container is not an acceptable shipping container.
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
Back to TopBack to Top
