2510-00-460-0065
TORSION BAR,SUSPENSION
2510-00-460-0065 (2510004600065, 004600065)
Part Number (1 listing): 2584119-1
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 2584119-1 | 3 - Design Control Reference | 2 - Production Item | NAVAL SEA SYSTEMS COMMAND | 53711 |  |
| 2584119-1 | 5 - Replaced / Discontinued | 2 - Production Item | FMC CORP | 22888 |  |
| 2584119-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | NAVAL SHIP SYSTEMS COMMAND | 80064 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 25 | 2510 | 004600065 | T307-R | 21827 | X | 4 | 3 | A | N | U | 7 Jan 1970 |
2510
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Vehicular Cab, Body, and Frame Structural Components
T307-R
Federal Item Identification Guide (FIIG_4065)
21827
Item Naming Code (INC_4080)
7 Jan 1970
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 May 1997 | |||||||||||||||||||||||||||||
| YA01 | 1 Dec 2001 | |||||||||||||||||||||||||||||
| N9BC | 1 | G | Z | GH | GG | 1 Dec 2013 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
GG Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 2 | 1 | AX | A | 2584119-1 | 53711 | | ||||
| 3 | 5 | 2 | 5 | AX | D | 2584119-1 | 22888 | | ||||
| 3 | 5 | 9 | 1 | PA | B | 2584119-1 | 80064 | | ||||
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
PA
Reference Number Action Activity Code (RNAAC_2900)
Marine Corps Logistics Base, Albany, GA 31704-1128
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | AX | 0 | 15 May 1974 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
15 May 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PA | 572 | Z | 9 | A | V | Z | W | 178040 | Z | 87460 | SPRINGS-TORSION |
PA
Originating Activity Code (ORIG_ACTY_CD_4210)
Marine Corps Logistics Base, Albany, GA 31704-1128
572
Water Commodity Code (WRT_CMDTY_CD_9275)
Iron or Steel Bars, (less than 35 feet) (See 822)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
178040
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
87460
Uniform Freight Classification (UFC_CD_MODF_3040)
SPRINGS-TORSION
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | AAA | 50.0 lbs | 1.230 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | E5 | DO | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
50.0 lbs
Unit Pack Weight (UP_WT_5153)
1.230 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
E5
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ARQS | Construction | SOLID |
| AQHT | Cover | NOT PROVIDED |
| ADGN | First End Chamfer Length | 0.188 INCHES NOMINAL |
| CFGQ | First End Cross-Sectional Shape | SERRATED |
| AMER | First End Internal Thread Length | 0.812 INCHES NOMINAL |
| CFGT | First End Major Diameter | 2.241 INCHES MINIMUM AND 2.246 INCHES MAXIMUM |
| AMDS | First End Pitch Diameter | 2.216 INCHES NOMINAL |
| CFGW | First End Pressure Angle In Deg | 50.00 |
| CFGS | First End Serration Length | 1.188 INCHES NOMINAL |
| AQSR | First End Thread Series/Type Designator | UNC |
| AQSQ | First End Thread Size | 5/8-11 |
| CFGR | First End Teeth Quantity | 44 |
| ACLK | First End Thread Class | 2B |
| ACLL | First End Thread Direction | RIGHT-HAND |
| MATT | Material | STEEL,MIL-S-45387 |
| ABKV | Outside Diameter | 1.845 INCHES MINIMUM AND 1.855 INCHES MAXIMUM |
| CFGX | Second End Cross-Sectional Shape | SERRATED |
| AMHP | Second End Internal Thread Length | 0.812 INCHES NOMINAL |
| CFHB | Second End Major Diameter | 2.140 INCHES MINIMUM AND 2.145 INCHES MAXIMUM |
| CFGY | Second End Teeth Quantity | 42 |
| ACMR | Second End Thread Class | 2B |
| ACMS | Second End Thread Direction | RIGHT-HAND |
| AQST | Second End Thread Series/Type Designator | UNC |
| AQSS | Second End Thread Size | 5/8-11 |
| AMGF | Second End Pitch Diameter | 2.115 INCHES NOMINAL |
| CFHC | Second End Pressure Angle In Deg | 50.00 |
| CFGZ | Second End Serration Length | 1.500 INCHES NOMINAL |
| CFHF | Solid Bar End Characteristic At First End | THREADED HOLE |
| CFHG | Solid Bar End Characteristic At Second End | THREADED HOLE |
| FEAT | Special Features | 3/8 IN. CORNER RADIUS ON SMALL END |
| ABHP | Overall Length | 67.375 INCHES NOMINAL |
| ASRX | Twist Direction | CLOCKWISE |
Back to TopBack to Top
