2520-01-423-1947
SHAFT,AXLE,AUTOMOTIVE
2520-01-423-1947 (2520014231947, 014231947)
Part Numbers (3 listings): 12460369-2 | 299-0047 | RCSK17028-2 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 12460369-2 | 1 - Source of Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
| 299-0047 | 3 - Design Control Reference | 2 - Production Item | GKN DRIVELINE NORTH AMERICA INC. | 62826 |  |
| RCSK17028-2 | 5 - Replaced / Discontinued | 2 - Production Item | AM GENERAL, LLC | 34623 |  |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 25 | 2520 | 014231947 | T306-D | 10852 | X | 4 | 6 | A | P | A | 18 Dec 1995 |
T306-D
Federal Item Identification Guide (FIIG_4065)
10852
Item Naming Code (INC_4080)
18 Dec 1995
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZS01 | 1 Jul 2000 | |||||||||||||||||||||||||||||
| WI01 | 1 Jun 2004 | |||||||||||||||||||||||||||||
| WP01 | 1 Apr 2006 | |||||||||||||||||||||||||||||
| A920 | A181 | 3 | B | Z | AZ | AZ | BS | 1 Jun 2006 | ||||||||||||||||||||||
| FGGC | FGAX | 3 | B | Z | TG | 1 Jun 2006 | ||||||||||||||||||||||||
| MC40 | MC01 | 3 | B | Z | PA | 1 Jun 2006 | ||||||||||||||||||||||||
| ZU01 | 1 Jun 2006 | |||||||||||||||||||||||||||||
| ZC01 | 1 Jul 2011 | |||||||||||||||||||||||||||||
| ZP01 | 1 Feb 2013 | |||||||||||||||||||||||||||||
| N9BC | 3 | B | Z | GH | GG | GT | 1 Dec 2013 | |||||||||||||||||||||||
| YD01 | 1 Jul 2016 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
AZ
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
TG
Item Management Coding Activity (IMC_ACTY_2748)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
GG Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
AZ
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
BS
Supplementary Receivers (SUPPLM_RCVR_2534)
USAMC Data Management Center, Redstone Arsenal, AL 35898-5239
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 1 | ZZ | 12460369-2 | 19207 | | ||||||
| 3 | 2 | 5 | ZZ | 299-0047 | 62826 | | ||||||
| 5 | 2 | E | ZZ | RCSK17028-2 | 34623 | | ||||||
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 18 Dec 1995 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
18 Dec 1995
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX | 585 | Z | 9 | A | V | Z | S | 017900 | X | 08190 | AUTO-AXLE-SHAFTS |
AX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43216-5000
585
Water Commodity Code (WRT_CMDTY_CD_9275)
Vehicles and Auto Supplies
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
S
Less Than Truckload (CLAS_RTNG_CD_2770)
60
017900
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
08190
Uniform Freight Classification (UFC_CD_MODF_3040)
AUTO-AXLE-SHAFTS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DA | SMS | D | U | 1 | O | EA | 0 | |
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DM | SMS | D | U | 1 | O | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | F | EA | 0 | |
| DA | SMS | D | U | 1 | O | EA | 0 | |
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DM | SMS | D | U | 1 | O | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | F | EA | 0 |
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
O
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or economically unserviceable, dispose at organizational level; COAST GUARD: Reparable item. When uneconomically reparable, condemn and dispose at the organizational (user) level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose of at organization level; NAVY: Unassigned
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
F
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or uneconomically repairable, then dispose at direct support (ds) level; DLA: This item has been reviewed and a determination made that the item can be restored to a serviceable condition from an unserviceable condition at the organizational/field level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at the third echelon level; NAVY: (1) Fast-Moving 1I Cog Forms (2) Non-Perishable Provisions
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | 000 | 26.3 lbs | 32in x 4in x 4in | 0.296 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 49 | GC | JC | X | E8 | 00 | 40 | Q | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
26.3 lbs
Unit Pack Weight (UP_WT_5153)
32in x 4in x 4in
Unit Pack Size (UP_SZ_5154)
0.296 cu ft
Unit Pack Cube (UP_CU_5155)
49
Preservation Material Code (PRSRV_MAT_CD_5162)
Vendor's protective grease or oil coating
GC
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, Type I, medium duty, greaseproof, waterproof barrier
JC
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
ASTM-D4727, domestic fiberboard used as pads, cells, die cuts or sleeves
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
E8
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class domestic, double wall, corrugated fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
40
Special Marking Code (SP_MKG_CD_5169)
Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BNTX | End Hole Type | THREADED |
| AGAV | End Item Identification | WEAPONS SYSTEM 80, TRUCK, VEHICLE SYSTEM, 1-1/4-TON (HMMWV), NSN 2320-01-380-8604 |
| BNTF | First End Bearing Seat | INCLUDED |
| AMQA | First End Type | FLANGED |
| BNYS | Flange Overall Thickness | 0.535 INCHES NOMINAL |
| BNYT | Flange Thickness At Mounting Hole | 0.335 INCHES NOMINAL |
| AHTC | Flange Outside Diameter | 3.543 INCHES NOMINAL |
| AAZQ | Hole Depth | 1.000 INCHES NOMINAL |
| AAUB | Hole Diameter | 0.450 INCHES NOMINAL |
| ASXK | Hole Quantity | 1 |
| AJYT | Hole Screw Thread Series Designator | UNC |
| AKAG | Hole Thread Direction | RIGHT-HAND |
| BDFL | Hole Thread Size | 3/8-16 |
| AETC | Metallic Hardness Rating | 58.0 MINIMUM ROCKWELL C AND 63.0 MAXIMUM ROCKWELL C |
| AXHR | Mounting Facility Type And Quantity | 6 UNTHREADED HOLE |
| BNTT | Second End Bearing Seat | NOT INCLUDED |
| BNTN | Second End Spline Pressure Angle In Deg | 45.0 |
| BNTM | Second End Spline Type | INVOLUTE |
| BBCF | Second End Spline Quantity | 32 |
| AMGF | Second End Pitch Diameter | 1.333 INCHES NOMINAL |
| AMQF | Second End Type | SPLINED |
| ABHP | Overall Length | 30.240 INCHES NOMINAL |
| FEAT | Special Features | RIGHT FRONT HALF SHAFT |
Back to TopBack to Top
