2530-00-912-4466
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
2530-00-912-4466 (2530009124466, 009124466)
Part Numbers (9 listings): C6TZ-2261-B | F55674 | H-55674 | 2825503 | 2622822 | WC155 | 3490 | EW55674 | 37099 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| C6TZ-2261-B | 3 - Design Control Reference | 9 - No Longer Used | FORD MOTOR CO | 23040 |  |
| F55674 | 5 - Replaced / Discontinued | 2 - Production Item | FEDERAL MOGUL CORP | 63477 |  |
| C6TZ-2261-B | 5 - Replaced / Discontinued | 2 - Production Item | FORD MOTOR CO | 57526 |  |
| H-55674 | 5 - Replaced / Discontinued | 2 - Production Item | CHRYSLER CORP | 86403 |  |
| 2825503 | 5 - Replaced / Discontinued | 2 - Production Item | DAIMLER CHRYSLER | 12204 |  |
| 2622822 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL MOTORS LLC | 7X677 |  |
| WC155 | 5 - Replaced / Discontinued | 2 - Production Item | TRW INC REPLACEMENT PARTS DIV | 66614 |  |
| 2622822 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 |  |
| 3490 | 5 - Replaced / Discontinued | 9 - No Longer Used | ALLIED AUTOMOTIVE | 14894 |  |
| 2622822 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 11862 |  |
| 3490 | 5 - Replaced / Discontinued | 9 - No Longer Used | BENDIX CORP THE | 06840 |  |
| EW55674 | 5 - Replaced / Discontinued | 9 - No Longer Used | EIS BRAKE PARTS | 80724 |  |
| 37099 | 5 - Replaced / Discontinued | 9 - No Longer Used | ECHLIN INC | 19239 |  |
| WC155 | 5 - Replaced / Discontinued | 9 - No Longer Used | C. E. NIEHOFF & CO. | 76761 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 25 | 2530 | 009124466 | A34200 | 10862 | X | 4 | 3 | A | P | U | 17 Apr 1968 |
2530
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Vehicular Brake, Steering, Axle, Wheel, and Track Components
A34200
Federal Item Identification Guide (FIIG_4065)
10862
Item Naming Code (INC_4080)
17 Apr 1968
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZW01 | 1 Apr 2002 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 9 | 6 | AX | C6TZ-2261-B | 23040 | | ||||||
| 5 | 2 | 6 | AX | 2622822 | 7X677 | | ||||||
| 5 | 2 | 5 | AX | H-55674 | 86403 | | ||||||
| 1 | 5 | 2 | 5 | AX | A | 2825503 | 12204 | | ||||
| 5 | 2 | 5 | ZZ | C6TZ-2261-B | 57526 | | ||||||
| 1 | 5 | 2 | 5 | AX | A | F55674 | 63477 | | ||||
| 5 | 2 | 5 | AX | WC155 | 66614 | | ||||||
| 1 | 5 | 9 | 5 | AX | B | WC155 | 76761 | | ||||
| 5 | 9 | 6 | AX | B | 3490 | 14894 | | |||||
| 1 | 5 | 9 | 5 | AX | B | 37099 | 19239 | | ||||
| 1 | 5 | 9 | 5 | AX | B | 3490 | 06840 | | ||||
| 5 | 9 | 6 | AX | B | 2622822 | 11862 | | |||||
| 1 | 5 | 9 | 5 | AX | B | EW55674 | 80724 | | ||||
| 5 | 9 | 6 | AX | B | 2622822 | 24617 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | AX | 0 | 28 Jul 1972 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
28 Jul 1972
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX | 885 | Z | 9 | A | V | Z | W | 133300 | Z | 63220 | MACHINERY-MACHINES-NOI |
AX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43216-5000
885
Water Commodity Code (WRT_CMDTY_CD_9275)
Vehicles, MHE, Road Construction. Repair Parts and Components
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
133300
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
63220
Uniform Freight Classification (UFC_CD_MODF_3040)
MACHINERY-MACHINES-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
S9C
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
DLA Land and Maritime, Columbus, OH 43215 ** No longer valid for input **
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
Z
Quantity Unit Pack (QUP_6106)
* Special Requirements
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | 31 | 1 | AAA | 2.2 lbs | 4in x 4in x 2in | 0.018 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | D3 | 00 | E | H | U |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
31
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Waterproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
2.2 lbs
Unit Pack Weight (UP_WT_5153)
4in x 4in x 2in
Unit Pack Size (UP_SZ_5154)
0.018 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
H
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished using boxes fabricated in accordance with ASTMD5118, class weather-resistant.
U
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CKSD | Design Characteristics | SINGLE ACTING SINGLE CYLINDER |
| ABMK | Overall Width | 2.188 INCHES NOMINAL |
| ABKW | Overall Height | 3.688 INCHES NOMINAL |
| ADAR | Body Outside Diameter | 2.000 INCHES NOMINAL |
| AAFZ | Body Material | STEEL |
| ASBP | Bore Type | STRAIGHT |
| ABXV | Bore Diameter | 1.500 INCHES NOMINAL |
| CLML | Mounting Type And Location | FLANGE CENTER SECTION |
| CLMS | Port Location And Quantity | 1 CENTER SECTION |
| CLMT | Port Style | INVERTED FLARE |
| CLMW | Port Thread Series Designator | UNF |
| CLMX | Port Thread Diameter | 0.375 INCHES NOMINAL |
| CLMY | Port Thread Quantity Per Inch | 24 |
| CLNB | Port Thread Class | 2B |
| AJFY | Seat Angle In Deg | 12.0 |
| BBJX | Mounting Position | LEFT |
| CLND | Bleeding Feature Quantity | 1 |
| CBBL | Features Provided | RUBBER BOOT |
Back to TopBack to Top
