2815-00-080-5813
CYLINDER SLEEVE
2815-00-080-5813 (2815000805813, 000805813)
Part Number (1 listing): 5138135
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 5138135 | 3 - Design Control Reference | 2 - Production Item | MTU AMERICA INC. | 72582 |  |
| 5138135 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 28 | 2815 | 000805813 | T267-B | 16756 | X | 4 | 3 | A | N | U | 17 Nov 1972 |
T267-B
Federal Item Identification Guide (FIIG_4065)
16756
Item Naming Code (INC_4080)
17 Nov 1972
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Mar 1997 | |||||||||||||||||||||||||||||
| WP01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| C911 | C001 | 3 | C | 1 Jun 2006 | ||||||||||||||||||||||||||
| N9BC | N9CD | 3 | C | Z | HD | GT | HD | 1 Jun 2006 | ||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 5 | AX | D | 5138135 | 72582 | | ||||
| 3 | 5 | 9 | 5 | AX | B | 5138135 | 24617 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | AX | 0 | 1 Dec 1974 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX | 593 | Z | 9 | A | V | Z | M | 114730 | X | 58790 | BARRELS-LINERS-SLEEVES-I-C-ENGINE |
AX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43216-5000
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
M
Less Than Truckload (CLAS_RTNG_CD_2770)
85
114730
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58790
Uniform Freight Classification (UFC_CD_MODF_3040)
BARRELS-LINERS-SLEEVES-I-C-ENGINE
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
GP
Service / Agency Code (MOE_CD_2833)
U.S. Coast Guard
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | AAA | 22.0 lbs | 14in x 5in x 5in | 0.202 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 49 | GB | 00 | 0 | D3 | DO | 02 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
22.0 lbs
Unit Pack Weight (UP_WT_5153)
14in x 5in x 5in
Unit Pack Size (UP_SZ_5154)
0.202 cu ft
Unit Pack Cube (UP_CU_5155)
49
Preservation Material Code (PRSRV_MAT_CD_5162)
Vendor's protective grease or oil coating
GB
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, greaseproof, waterproof barrier
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
02
Special Marking Code (SP_MKG_CD_5169)
Arrow up
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BQBJ | Distance From Top To Center Of First Row | 5.375 INCHES NOMINAL |
| ADAR | Body Outside Diameter | 6.500 INCHES NOMINAL |
| ABXV | Bore Diameter | 5.750 INCHES NOMINAL |
| BPPW | Bottom Inside Chamfer | NOT INCLUDED |
| APGF | Design Type | DRY |
| AHTC | Flange Outside Diameter | 6.875 INCHES NOMINAL |
| ABKU | Flange Thickness | 0.456 INCHES NOMINAL |
| AAUB | Hole Diameter | 0.562 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| BQBH | Hole Quantity Per Row | 24 |
| MATT | Material | STEEL |
| BQBF | Intake Hole | INCLUDED |
| AQXM | Row Quantity | 1 |
| ABHP | Overall Length | 12.375 INCHES NOMINAL |
| FEAT | Special Features | INTAKE HOLES SLOTTED |
| BPPS | Valve Recess | NOT INCLUDED |
| STYL | Style Designator | DRY, FLANGED, RELIEVED |
| BPPT | Top Inside Chamfer | NOT INCLUDED |
| BPPX | Top Intake Port | NOT INCLUDED |
Back to TopBack to Top
