2815-00-397-3316
PISTON,INTERNAL COMBUSTION ENGINE
2815-00-397-3316 (2815003973316, 003973316)
Part Numbers (3 listings): 11683943 | 655216 | 2815003973316 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 11683943 | 1 - Source of Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
| 11683943 | 3 - Design Control Reference | 2 - Production Item | MINOWITZ MANUFACTURING CO. | 32842 |  |
| 11683943 | 3 - Design Control Reference | 2 - Production Item | L-3 COMMUNICATIONS CORPORATION | 02978 | |
| 655216 | 5 - Replaced / Discontinued | 9 - No Longer Used | L-3 COMMUNICATIONS CORPORATION | 02978 | |
| 2815003973316 | 5 - Replaced / Discontinued | 9 - No Longer Used | E.C.A ETABLISSEMENT | SCY13 | |
| 11683943 | 5 - Replaced / Discontinued | 9 - No Longer Used | MACTEK INDUSTRIES CORP | 6R738 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 28 | 2815 | 003973316 | T267-C | 16509 | X | 4 | 3 | A | N | U | 15 Apr 1974 |
T267-C
Federal Item Identification Guide (FIIG_4065)
16509
Item Naming Code (INC_4080)
15 Apr 1974
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Jul 1995 | |||||||||||||||||||||||||||||
| YB01 | 1 Feb 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Mar 2001 | |||||||||||||||||||||||||||||
| ZW01 | 1 Jul 2001 | |||||||||||||||||||||||||||||
| A920 | A181 | 1 | B | Z | AZ | AZ | BD | 1 Jun 2006 | ||||||||||||||||||||||
| FGGC | FGAX | 1 | B | Z | TG | 1 Jun 2006 | ||||||||||||||||||||||||
| MC40 | MC01 | 1 | B | Z | PA | 1 Jun 2006 | ||||||||||||||||||||||||
| WB01 | 1 Aug 2006 | |||||||||||||||||||||||||||||
| YP01 | 1 Nov 2008 | |||||||||||||||||||||||||||||
| N9BC | 1 | B | Z | GH | GG | 1 Dec 2013 | ||||||||||||||||||||||||
| YK01 | 1 Jan 2015 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
AZ
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
TG
Item Management Coding Activity (IMC_ACTY_2748)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
GG Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
AZ
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
BD
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 2 | A | AZ | D | 11683943 | 19207 | | ||||
| 3 | 2 | 6 | ZZ | 11683943 | 32842 | | ||||||
| 3 | 2 | E | ZZ | 11683943 | 02978 | | ||||||
| 5 | 9 | 5 | ZZ | 655216 | 02978 | | ||||||
| 5 | 9 | 6 | ZZ | 11683943 | 6R738 | | ||||||
| 4 | 5 | 9 | 9 | YP | B | 2815003973316 | SCY13 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
AZ
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
9
Document Availability Code (DAC_2640)
The reference number is of the type for which an indication of document availability is not required.
YP
Reference Number Action Activity Code (RNAAC_2900)
Morocco
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | AX | 0 | 1 Dec 1974 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AZ | 593 | Z | 9 | A | V | Z | W | 120800 | Z | 61410 | ENGINES--INTERNAL-COMBUSTION--NOI |
AZ
Originating Activity Code (ORIG_ACTY_CD_4210)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
120800
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
61410
Uniform Freight Classification (UFC_CD_MODF_3040)
ENGINES--INTERNAL-COMBUSTION--NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DA | SMS | D | U | 1 | Z | EA | 0 | |
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DM | SMS | D | U | 1 | Z | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | N | EA | 0 | |
| DA | SMS | Z | U | 1 | Z | EA | 0 | |
| DF | SMS | Z | U | 1 | N | EA | 0 | |
| DM | SMS | Z | U | 1 | Z | EA | 0 | |
| DN | SMS | Z | U | 1 | EA | 0 | ||
| DS | SMS | Z | U | 1 | N | EA | 0 |
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 31 | 1 | AAA | 7.8 lbs | 0.146 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 0 | D3 | DO | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
31
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Waterproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
7.8 lbs
Unit Pack Weight (UP_WT_5153)
0.146 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AXPK | Distance From Pin Hole Center To Extreme Top | 4.344 INCHES MINIMUM AND 4.354 INCHES MAXIMUM |
| BQBL | Carbon Groove | NOT INCLUDED |
| AXFW | Cut Depth | 0.380 INCHES NOMINAL |
| ABMZ | Diameter | 5.741 INCHES MINIMUM AND 5.742 INCHES MAXIMUM |
| AXFR | Finished Size Designation | STANDARD |
| AXGC | Groove Taper Angle | 7 DEGREE 25 MINUTES PORM 5 MINUTES NUMBER 1 |
| AASK | Head Style | CAVITY |
| AXPH | Oil Groove | NOT INCLUDED |
| AXPN | Retaining Ring Groove | INCLUDED |
| AXGD | Ring Groove Diameter | 5.179 INCHES MAXIMUM |
| AXGD | Ring Groove Diameter | 5.187 INCHES MINIMUM |
| AXGD | Ring Groove Diameter | 5.169 INCHES MINIMUM |
| AXGD | Ring Groove Diameter | 5.220 INCHES MAXIMUM |
| AXGD | Ring Groove Diameter | 5.192 INCHES MAXIMUM |
| AXGD | Ring Groove Diameter | 5.210 INCHES MINIMUM |
| AXGA | Ring Groove Position | NUMBER 1,NUMBER 2,NUMBER 3,AND NUMBER 4 |
| AXFZ | Ring Groove Quantity | 4 |
| AXGB | Ring Groove Width | 0.0980 INCHES MINIMUM AND 0.0990 INCHES MAXIMUM |
| AXGB | Ring Groove Width | 0.0990 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| AXGB | Ring Groove Width | 0.0995 INCHES MINIMUM AND 0.1005 INCHES MAXIMUM |
| AXGB | Ring Groove Width | 0.1880 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM |
| AXPR | Ring | NOT INCLUDED |
| AXFX | Skirt Bottom Cutaway Feature | INCLUDED |
| AXFT | Skirt Type | SOLID |
| ABKW | Overall Height | 6.464 INCHES MINIMUM AND 6.474 INCHES MAXIMUM |
| AXPL | Pin Hole Bushing | NOT INCLUDED |
| AXPQ | Pin Type For Which Designed | FLOATING |
| ACXU | Pinhole Diameter | 2.1268 INCHES MINIMUM AND 2.1270 INCHES MAXIMUM |
| AXPP | Pin | NOT INCLUDED |
| WGHT | Weight | 127.7 OUNCES |
| AGYE | Surface Finish | FINISHED |
Back to TopBack to Top
