Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
DBM1110PLM | 3 - Design Control Reference | 2 - Production Item | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
FBM1110-PLM | 3 - Design Control Reference | 2 - Production Item | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
FBM1110PB | 3 - Design Control Reference | 2 - Production Item | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
74505310 | 3 - Design Control Reference | 2 - Production Item | AGCO CORP | 6N299 | ![]() |
149-0408 | 5 - Replaced / Discontinued | 2 - Production Item | CUMMINS POWER GENERATION INC. | 44940 | ![]() |
10910342 | 5 - Replaced / Discontinued | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 | ![]() |
125246CS | 5 - Replaced / Discontinued | 2 - Production Item | D.W. HERCULES, LLC | 1ML14 | ![]() |
JHP95-118 | 5 - Replaced / Discontinued | 9 - No Longer Used | HOLLINGSWORTH JOHN R CO | 02032 | ![]() |
11614 | 5 - Replaced / Discontinued | 9 - No Longer Used | WESTERBEKE CORPORATION | 03798 | ![]() |
FBM1110PBWAU | 5 - Replaced / Discontinued | 9 - No Longer Used | DRESSER, INC. | 64104 | ![]() |
101796 | 5 - Replaced / Discontinued | 9 - No Longer Used | DRESSER, INC. | 64104 | ![]() |
F-906-C | 5 - Replaced / Discontinued | 9 - No Longer Used | BALDWIN FILTERS INC | 12658 | ![]() |
124593 | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
F1124APBHER | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
149C408 | 5 - Replaced / Discontinued | 9 - No Longer Used | CUMMINS POWER GENERATION INC. | 44940 | ![]() |
F1124APB | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
FBM1124APB | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
LP47 | 5 - Replaced / Discontinued | 9 - No Longer Used | WISCONSIN MOTORS LLC | 66289 | ![]() |
125246CS | 5 - Replaced / Discontinued | 9 - No Longer Used | HERCULES ENGINE CO INC | 28265 | ![]() |
FBM1110PBWAU | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
4505310 | 5 - Replaced / Discontinued | 9 - No Longer Used | AGCO CORP | 6N299 | ![]() |
FBM1110-PB | C - Advisory Reference | 1 - Incomplete Part Number | PECOFACET OKLAHOMA LLC | 87405 | ![]() |
FBM1106PLCU | C - Advisory Reference | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC | 73370 | ![]() |
07-1621 | C - Advisory Reference | 1 - Incomplete Part Number | BACHARACH, INC. | 05083 | ![]() |
07-1609 | C - Advisory Reference | 1 - Incomplete Part Number | W B S CORP | 05483 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
29 | 2910 | 000763535 | A24000 | 32622 | X | 4 | 3 | A | N | U | 29 Jul 1967 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G860 | 0 | 0 | C | 1 Apr 1991 | ||||||||||||||||||||||||||
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZP01 | 1 Jul 1998 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
MC40 | MC01 | 1 | R | Z | PA | 1 Aug 2004 | ||||||||||||||||||||||||
N9BC | N9CD | 1 | R | Z | GH | GT | HD | 1 Aug 2004 | ||||||||||||||||||||||
FUGC | FUAX | 1 | R | Z | SU | 1 Aug 2004 | ||||||||||||||||||||||||
ZU01 | 1 Jun 2005 | |||||||||||||||||||||||||||||
YW01 | 1 Sep 2008 | |||||||||||||||||||||||||||||
BGX1 | BAX1 | 1 | R | 31 Dec 2012 | ||||||||||||||||||||||||||
YC01 | 1 Jul 2015 |
Not Established
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | AX | 74505310 | 6N299 | ![]() | ||||||
3 | 2 | 6 | ZZ | DBM1110PLM | 73370 | ![]() | ||||||
3 | 2 | 6 | ZZ | FBM1110-PLM | 73370 | ![]() | ||||||
1 | 3 | 2 | 1 | AX | A | FBM1110PB | 73370 | ![]() | ||||
1 | 5 | 2 | 1 | AX | C | 10910342 | 19207 | ![]() | ||||
5 | 2 | 3 | AX | 125246CS | 1ML14 | ![]() | ||||||
4 | 5 | 2 | 5 | AX | A | 149-0408 | 44940 | ![]() | ||||
1 | 5 | 9 | 1 | AX | B | 149C408 | 44940 | ![]() | ||||
1 | 5 | 9 | 3 | AX | B | 101796 | 64104 | ![]() | ||||
1 | 5 | 9 | 5 | AX | B | FBM1110PBWAU | 64104 | ![]() | ||||
5 | 9 | 6 | ZZ | B | LP47 | 66289 | ![]() | |||||
5 | 9 | 5 | AX | B | 4505310 | 6N299 | ![]() | |||||
5 | 9 | 6 | ZZ | B | JHP95-118 | 02032 | ![]() | |||||
5 | 9 | 3 | ZZ | B | 11614 | 03798 | ![]() | |||||
1 | 5 | 9 | 3 | AX | B | 125246CS | 28265 | ![]() | ||||
1 | 5 | 9 | 5 | AX | B | 124593 | 73370 | ![]() | ||||
5 | 9 | 6 | ZZ | B | F1124APB | 73370 | ![]() | |||||
5 | 9 | 6 | ZZ | B | F1124APBHER | 73370 | ![]() | |||||
1 | 5 | 9 | 5 | AX | B | FBM1110PBWAU | 73370 | ![]() | ||||
5 | 9 | 6 | ZZ | B | FBM1124APB | 73370 | ![]() | |||||
5 | 9 | 6 | ZZ | B | F-906-C | 12658 | ![]() | |||||
C | 1 | 6 | ZZ | AC | FBM1110-PB | 87405 | ![]() | |||||
C | 1 | 6 | ZZ | AC | FBM1106PLCU | 73370 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 07-1621 | 05083 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 07-1609 | 05483 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43216-5000
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number originates from a descriptive technical document of the product, which may be used as a procurement document without restrictions. The NCAGE specified for this reference number identifies the originating organization or agency of the document but not the supply source of the item. NOTE: This code is to be allocated to reference numbers originating from generally available specifications/standards or to drawing numbers for which the Government has separate property rights or for which the author does not claim any property rights.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Navy
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
C | AX | 0 | 28 Apr 1999 |
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SG | 593 | Z | 9 | A | V | Z | Q | 133320 | X | 64100 | MACHINERY-PARTS-OIL-FUEL-FILTER |
403 SCMS/GUED, 5215 Thurlow St, Suite 5, Bldg 70C Wright-Patterson AFB OH 45433
Motors and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
No special handling required.
70
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 31 | 1 | AAA | 2.2 lbs | 0.065 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | D4 | E5 | 00 | Q | Q | M |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Waterproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
Vendor's setup or folding box.
ASTM-D5118, fiberboard box.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AGAV | End Item Identification | DIESEL ENGINE; ONAN CORP,SERIES DJC |
ADAU | Body Height | 6.487 INCHES NOMINAL |
ADAR | Body Outside Diameter | 3.650 INCHES NOMINAL |
APGF | Design Type | REUSABLE |
AFQM | Distance Between Mounting Hole Centers | 1.375 INCHES NOMINAL AND 2.000 INCHES NOMINAL |
CBBL | Features Provided | DRAIN PLUG |
CCZM | Filtering Element Quantity | 1 |
CRXW | Filtering Media Design | SPUN ROVING SINGLE FILTERING MEDIA RESPONSE |
CXZX | Filtering System For Which Designed | FULL FLOW |
CSJR | First Discharge Connection Relationship To Intake Connection | IDENTICAL TO FIRST INTAKE CONNECTION |
CRXZ | First Intake Connection Type | THREADED INTERNAL PIPE HEAD SIDE |
CTGK | First Intake Nominal Thread Size | 0.250 INCHES |
CXPF | First Intake Thread Direction | RIGHT-HAND |
CTDY | First Intake Thread Series Designator | NPTF |
MATT | Material | ZINC ALLOY BODY |
MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON |
CSJC | Mounting Facility Nominal Thread Size | 0.375 INCHES |
CDTD | Mounting Facility Thread Series Designator | UNC |
ABTJ | Mounting Hole Quantity | 4 |
AAXX | Mounting Type | THREADED HOLE HEAD |
STYL | Style Designator | UNTHREADED SHELL |
FEAT | Special Features | FURNISHED WITH MOUNTING BRACKET |
SFTT | Surface Treatment | PAINT BODY |
SFTT | Surface Treatment | PAINT SEDIMENT BOWL |