2920-00-058-4195
GENERATOR,ENGINE ACCESSORY
2920-00-058-4195 (2920000584195, 000584195)
Part Number (1 listing): 1106868
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 1106868 | 3 - Design Control Reference | 2 - Production Item | REMY, INC. | 1LW55 |  |
| 1106868 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 |  |
| 1106868 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 16764 |  |
| 1106868 | 5 - Replaced / Discontinued | 9 - No Longer Used | EUCLID INC | 30379 |  |
| 1106868 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 61928 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 29 | 2920 | 000584195 | A14700 | 17311 | X | K | A | N | U | 1 Jan 1961 |
2920
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Engine Electrical System Components, Nonaircraft
A14700
Federal Item Identification Guide (FIIG_4065)
17311
Item Naming Code (INC_4080)
1 Jan 1961
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| ZF01 | 1 Sep 1997 | |||||||||||||||||||||||||||||
| A920 | A181 | 1 | L | Z | CD | AZ | 1 Sep 2005 | |||||||||||||||||||||||
| N9BC | NICD | 1 | L | Z | GH | HD | 1 Sep 2005 | |||||||||||||||||||||||
| C911 | 1 | L | 1 Aug 2006 | |||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
L
Acquisition Method Suffix Code (AMSC_2876)
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
CD
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
AZ
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 1106868 | 1LW55 | | ||||||
| 3 | 5 | 9 | 6 | AX | B | 1106868 | 24617 | | ||||
| 3 | 5 | 9 | 6 | AX | B | 1106868 | 30379 | | ||||
| 3 | 5 | 9 | 5 | AX | B | 1106868 | 61928 | | ||||
| 4 | 5 | 9 | 2 | AX | B | 1106868 | 16764 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | AX | 0 | 6 Sep 1966 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
6 Sep 1966
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 590 | Z | 9 | A | V | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
590
Water Commodity Code (WRT_CMDTY_CD_9275)
Generators and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
062120
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34760
Uniform Freight Classification (UFC_CD_MODF_3040)
GENERATORS-MOTORS-PARTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
F
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or uneconomically repairable, then dispose at direct support (ds) level; DLA: This item has been reviewed and a determination made that the item can be restored to a serviceable condition from an unserviceable condition at the organizational/field level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at the third echelon level; NAVY: (1) Fast-Moving 1I Cog Forms (2) Non-Perishable Provisions
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
GP
Service / Agency Code (MOE_CD_2833)
U.S. Coast Guard
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 52 | 1 | 000 | 28.0 lbs | 0.026 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 10 | 00 | 00 | Q | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
52
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
28.0 lbs
Unit Pack Weight (UP_WT_5153)
0.026 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ANTX | Distance From End To Keyway Center | 1.375 INCHES NOMINAL |
| BCMB | Angular Deviation Of First Hole From Top Center In Deg | 193.0 |
| BCMC | Angular Deviation Of Second Hole From First Hole In Deg | 159.0 |
| BCGD | Armature Minimum Speed In Rpm At Full Current Output | 1700 |
| BCMH | Bottom Mounting Hole Diameter | 0.451 INCHES MINIMUM AND 0.461 INCHES MAXIMUM |
| BCMD | Distance Between Inside Surfaces Of Hinge Bracket | 9.020 INCHES MINIMUM AND 9.042 INCHES MAXIMUM |
| BCMF | Distance Between Outside Surfaces Of Hinge Bracket | 10.120 INCHES MINIMUM AND 10.182 INCHES MAXIMUM |
| BCLY | Distance Between Shaft Center And Bottom Mounting Hole Center | 3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM |
| BCLZ | Distance Between Shaft Center And Top Mounting Hole Center | 3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM |
| ABFF | Furnished Items | WOODRUFF KEY |
| AKAE | Maximum Operating Altitude Rating | 10000.0 FEET |
| BCND | Maximum Rated Armature Speed In Rpm | 5000 |
| CMLL | Mounting Hole Thread Diameter | 0.375 INCHES NOMINAL |
| CMLN | Mounting Hole Thread Class | 2B |
| ACJC | Mounting Hole Thread Direction | RIGHT-HAND |
| CMLM | Mounting Hole Thread Quantity Per Inch | 16 |
| CMLK | Mounting Hole Thread Series Designator | UNC |
| ADER | Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| BCGF | Maximum Output Current Rating In Amps | 20.0 |
| ABRR | Keyway Width | 0.156 INCHES NOMINAL |
| AFYS | Keyway Length | 0.750 INCHES NOMINAL |
| ABPT | Second Step Diameter | 0.874 INCHES NOMINAL |
| BCGS | Shaft Drive End Style | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| AKCT | Shaft Rotation Direction | COUNTERCLOCKWISE |
| ABVA | Unthreaded Portion Length | 1.320 INCHES NOMINAL |
| ELEC | Voltage In Volts | 24.0 |
| AHZV | Submersibility | NONSUBMERSIBLE |
| CFHL | Thread Class | 2A |
| AWDP | Thread Diameter | 0.625 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.730 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 18 |
| BZRR | Thread Series | UNF |
Back to TopBack to Top
