Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
1005047 | 3 - Design Control Reference | 2 - Production Item | CATERPILLAR INC. | 11083 | |
IPD5S9088 | 3 - Design Control Reference | 2 - Production Item | INDUSTRIAL PARTS DEPOT INC | 55883 | |
19010001 | 3 - Design Control Reference | 2 - Production Item | REMY, INC. | 1LW55 | |
317248 | 5 - Replaced / Discontinued | 2 - Production Item | OHIO GENERATOR REMANUFACTURING | 66022 | |
6008218990 | 5 - Replaced / Discontinued | 2 - Production Item | DRESSTA NORTH AMERICA LTD | 45RP7 | |
600-821-8990 | 5 - Replaced / Discontinued | 2 - Production Item | KOMATSU AMERICA CORP. | 0SAT8 | |
0 122 469 002 | 5 - Replaced / Discontinued | 2 - Production Item | ROBERT BOSCH GMBH | D8015 | |
1117248 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOMATSU AMERICAN INTL CO | 29510 | |
672901C91 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOMATSU AMERICAN INTL CO | 29510 | |
VZ4642 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOMATSU AMERICA CORP. | 0SAT8 | |
1117226 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
1117236 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
5S9088 | 5 - Replaced / Discontinued | 9 - No Longer Used | CATERPILLAR INC. | 11083 | |
10459064 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 16764 | |
1117226 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 16764 | |
1117236 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 16764 | |
1117248 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 16764 | |
1117226 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 61928 | |
1117236 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 61928 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
29 | 2920 | 002317270 | A14700 | 17311 | X | 1 | A | N | U | 19 Oct 1970 |
Engine Electrical System Components, Nonaircraft
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
YA01 | 1 May 2002 | |||||||||||||||||||||||||||||
ZW01 | 1 Mar 2005 | |||||||||||||||||||||||||||||
A920 | A181 | 1 | R | Z | CD | AZ | BD | 1 Aug 2006 | ||||||||||||||||||||||
FUGC | FUAX | 1 | R | Z | SU | 1 Aug 2006 | ||||||||||||||||||||||||
MC40 | MC01 | 1 | R | Z | PA | 1 Aug 2006 | ||||||||||||||||||||||||
N9BC | N9CD | 1 | R | Z | HD | GT | HD | 1 Aug 2006 | ||||||||||||||||||||||
YK01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
YD01 | 1 Jul 2016 | |||||||||||||||||||||||||||||
ZB01 | 1 Aug 2016 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Ogden Air Logistics Center, Hill AFB, UT 84056-5609
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 6 | ZZ | 1005047 | 11083 | |||||||
3 | 2 | 6 | ZZ | 19010001 | 1LW55 | |||||||
3 | 2 | 6 | AX | IPD5S9088 | 55883 | |||||||
5 | 2 | 5 | ZZ | D | 600-821-8990 | 0SAT8 | ||||||
5 | 2 | 6 | AX | 317248 | 66022 | |||||||
4 | 5 | 2 | 3 | ZB | D | 0 122 469 002 | D8015 | |||||
5 | 2 | 5 | ZZ | D | 6008218990 | 45RP7 | ||||||
5 | 9 | 6 | ZZ | B | VZ4642 | 0SAT8 | ||||||
4 | 5 | 9 | 5 | AX | B | 1117226 | 61928 | |||||
1 | 5 | 9 | 3 | AX | B | 1117236 | 61928 | |||||
4 | 5 | 9 | 5 | AX | B | 1117226 | 24617 | |||||
4 | 5 | 9 | 5 | AX | B | 1117236 | 24617 | |||||
5 | 9 | 6 | AX | B | 1117248 | 29510 | ||||||
5 | 9 | 6 | ZZ | B | 672901C91 | 29510 | ||||||
4 | 5 | 9 | 5 | AX | B | 5S9088 | 11083 | |||||
5 | 9 | 5 | ZZ | B | 10459064 | 16764 | ||||||
4 | 5 | 9 | 5 | AX | B | 1117226 | 16764 | |||||
1 | 5 | 9 | 5 | AX | B | 1117236 | 16764 | |||||
4 | 5 | 9 | 5 | AX | B | 1117248 | 16764 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Defense Supply Center Columbus, Columbus, OH 43216-5000
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Belgium
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 98 | 0 | 1 Feb 1975 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AX | 590 | Z | 9 | A | V | Z | W | 062120 | Z | 34760 | GENERATORS-MOTORS-PARTS-NOI |
Defense Supply Center Columbus, Columbus, OH 43216-5000
Generators and Parts, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | D | U | 1 | Z | EA | 0 | |
DF | SMS | D | U | 1 | P | EA | 0 | |
DM | SMS | D | U | 1 | H | EA | 0 | |
DN | SMS | D | U | 1 | EA | 0 | ||
DS | SMS | D | U | 1 | F | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XF3: Stock Fund (Except Munitions); NAVY: Perishable Subsistence Items
ARMY: If condemned or uneconomically repairable, then dispose at intermediate level; COAST GUARD: Reparable item. Repair, condemnation, and disposal not authorized below intermediate (district) level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at fourth echelon level; NAVY: Depot Level Reparable
ARMY: If condemned or uneconomically repairable, then dispose at direct support (ds) level; DLA: This item has been reviewed and a determination made that the item can be restored to a serviceable condition from an unserviceable condition at the organizational/field level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at the third echelon level; NAVY: (1) Fast-Moving 1I Cog Forms (2) Non-Perishable Provisions
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 41 | 1 | 000 | 27.8 lbs | 14in x 10in x 10in | 0.810 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
49 | X | E5 | 00 | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Watervaporproof bag, sealed
Any suitable process that is not injurious to the item.
Vendor's protective grease or oil coating
As required to protect the item or elements of the package
ASTM-D5118, fiberboard box.
No requirement.
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
BCMB | Angular Deviation Of First Hole From Top Center In Deg | 0.0 |
BCMC | Angular Deviation Of Second Hole From First Hole In Deg | 180.0 |
BCMH | Bottom Mounting Hole Diameter | 0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
BCMD | Distance Between Inside Surfaces Of Hinge Bracket | 3.940 INCHES MINIMUM AND 4.010 INCHES MAXIMUM |
BCMF | Distance Between Outside Surfaces Of Hinge Bracket | 5.060 INCHES MINIMUM AND 5.130 INCHES MAXIMUM |
BCLY | Distance Between Shaft Center And Bottom Mounting Hole Center | 3.890 INCHES MINIMUM AND 3.910 INCHES MAXIMUM |
BCLZ | Distance Between Shaft Center And Top Mounting Hole Center | 3.900 INCHES NOMINAL |
ABFF | Furnished Items | LOCKWASHER AND NUT |
ADZC | Environmental Protection | CORROSION RESISTANT |
AXHX | Ground Polarity Type | NEGATIVE |
BCGN | Grounding Method | EXTERNAL |
BCGG | Minimum Current Cut-In Speed In Rpm | 5000 |
CMLN | Mounting Hole Thread Class | 2B |
ACJC | Mounting Hole Thread Direction | RIGHT-HAND |
CMLL | Mounting Hole Thread Diameter | 0.500 INCHES NOMINAL |
CMLM | Mounting Hole Thread Quantity Per Inch | 12-1/2 |
CMLK | Mounting Hole Thread Series Designator | UNS |
ADER | Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
ABPT | Second Step Diameter | 0.874 INCHES NOMINAL |
BCGS | Shaft Drive End Style | STRAIGHT SHAFT END, THREADED |
AKCT | Shaft Rotation Direction | CLOCKWISE OR COUNTERCLOCKWISE |
ABVA | Unthreaded Portion Length | 1.260 INCHES MINIMUM AND 2.175 INCHES MAXIMUM |
ELEC | Voltage In Volts | 24.0 |
AHZV | Submersibility | NONSUBMERSIBLE |
CFHL | Thread Class | 2A |
AWDP | Thread Diameter | 0.625 INCHES NOMINAL |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.625 INCHES NOMINAL |
CMLP | Thread Quantity Per Inch | 18 |
BZRR | Thread Series | UNF |