- FSG 29 - Engine Accessories
- FSC 2995 - Miscellaneous Engine Accessories, Aircraft
- NSN 2995-00-998-5303
2995-00-998-5303
STARTER,ENGINE,AIR TURBINE
2995-00-998-5303 (2995009985303, 009985303)
Part Numbers (6 listings): 4P94450-103B | ATS100-302 | 383694-1-2 | 383694-1-3 | 4P94450-101A | 4P94450-103A |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 4P94450-103B | 1 - Source of Control Reference | 3 - Reparable Item | LOCKHEED MARTIN CORPORATION | 98897 |  |
| 4P94450-103B | 3 - Design Control Reference | 3 - Reparable Item | HONEYWELL INTERNATIONAL INC. | 59364 |  |
| ATS100-302 | 5 - Replaced / Discontinued | 3 - Reparable Item | HONEYWELL INTERNATIONAL INC. | 99193 |  |
| 383694-1-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC. | 99193 | |
| 383694-1-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC. | 99193 | |
| 4P94450-101A | 5 - Replaced / Discontinued | 9 - No Longer Used | LOCKHEED MARTIN CORPORATION | 98897 | |
| 4P94450-103A | 5 - Replaced / Discontinued | 9 - No Longer Used | LOCKHEED MARTIN CORPORATION | 98897 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
3 - Reparable Item
Reference Number Variation Code (DRN_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 29 | 2995 | 009985303 | T135-E | 20437 | F | N | 6 | B | N | A | 4 Dec 1967 |
T135-E
Federal Item Identification Guide (FIIG_4065)
20437
Item Naming Code (INC_4080)
4 Dec 1967
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
F
Item Criticality (CRITL_CD_FIIG_3843)
The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
N
Type of Item Identification (TYP_II_4820)
Partial Descriptive - Reference - Descriptive Item Identification (Type 1B Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FXX4 | 3 | B | F | E | SX | FT | 1 Apr 1991 | |||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| NAXS | 3 | B | 3 | D | FT | GG | 1 Jul 2001 | |||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 2008 | |||||||||||||||||||||||||||||
| ZA01 | 1 May 2009 | |||||||||||||||||||||||||||||
| WP01 | 1 Jun 2012 | |||||||||||||||||||||||||||||
| YB01 | 1 Dec 2014 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
F
Nonconsumable Item Material Support Code (NIMSC_0076)
An activity within the Air Force is providing depot maintenance support.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
3
Nonconsumable Item Material Support Code (NIMSC_0076)
End Item Primary Inventory Control Activity. This code identifies SICA managed end items or equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority and depot maintenance, if required, to be provided by DMISA. Supply support requirements will be submitted by the SICA to the PICA on MIPRs unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions for SICA activities. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
D
Item Management Code (IMC_2744)
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
FT DSOR
Depot Source of Repair Codes (DSOR_0903)
Oklahoma City Air Logistics Center (OC-ALC), Tinker AFB, OK
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 3 | 2 | MF | D | 4P94450-103B | 98897 | | ||||
| 3 | 3 | 4 | MF | 4P94450-103B | 59364 | | ||||||
| 4 | 5 | 3 | 2 | MF | D | ATS100-302 | 99193 | | ||||
| 3 | 5 | 9 | 2 | MF | B | 4P94450-101A | 98897 | | ||||
| 3 | 5 | 9 | 2 | MF | B | 4P94450-103A | 98897 | | ||||
| 3 | 5 | 9 | 4 | MF | B | 383694-1-2 | 99193 | | ||||
| 3 | 5 | 9 | 4 | MF | B | 383694-1-3 | 99193 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3
Reference Number Variation Code (RNVC_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
MF
Reference Number Action Activity Code (RNAAC_2900)
Engineering Data Support Center, Tinker AFB, OK 73145-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | TU | 0 | 12 Feb 1969 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
TU
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
12 Feb 1969
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SX | J | 671 | Z | Z | A | A | Z | K | 133300 | B | 63220 | MACHINERY-MACHINES-NOI-SUB-2 | 1 |
SX
Originating Activity Code (ORIG_ACTY_CD_4210)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
J
Less Than Carload (LCL_CD_2760)
100.2
671
Water Commodity Code (WRT_CMDTY_CD_9275)
Aircraft Parts, To include Test/Tool Sets and Equipment (other than armament systems)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
Z
Special Handling Code (SP_HDLG_CD_9240)
No special handling required. Heavy Lift (HL). Five short tons (10,000 lbs) or more. Applies to any piece, package, or palletized, unitized or containerized unit (excluding SEAVAN/MILVAN). Outsized Dimensions. Dimensions of any piece, package, or palletized, unitized or containerized unit (excluding SEAVAN/MILVAN, CONEXs, and POVs) which exceed six (6) feet in any dimension.
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
A
Air Commodity Code (AIR_CMTY_HDLG_9215)
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
K
Less Than Truckload (CLAS_RTNG_CD_2770)
92.5
133300
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
B
NMFC Sub Item Number (SUB_ITM_NBR_0861)
63220
Uniform Freight Classification (UFC_CD_MODF_3040)
MACHINERY-MACHINES-NOI-SUB-2
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
FHZ
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Oklahoma City Air Logistics Center, 3001 Staff Drive, Tinker AFB, OK 73145-3303
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
T
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XD2: AF Recoverable Assembly Management System (AFRAMS); NAVY: Terminal Items
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
X
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
NAVY: Special Program Reparables
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | S | A | DW | 1 | 000 | 43.0 lbs | 24in x 19in x 19in | 5.014 cu ft | 35.0 lbs | 14in x 8in x 8in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | FA | GH | R | ED | 00 | O | 03 | E | Q | M |
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 51 | 1 | 000 | 66.9 lbs | 25in x 19in x 17in | 4.673 cu ft | 30.0 lbs | 12.5in x 11in x 11in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | X | NV | 00 | B | 19 | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
S
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Secondary Inventory Control Activity (SICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
DW
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preserve by Method 52 as follows: Item shall be cleaned, wrapped, blocked and braced in an interior carton fabricated in accordance with ASTM-D5118, Class domestic. MIL-PRF-131 barrier material, sealed as required, shall be utilized around the first container. The cushioning, to be specified under the cushioning code and in the thickness required to adequately protect the item, shall be placed between the barrier and the outer container.
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
51
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
43.0 lbs
Unit Pack Weight (UP_WT_5153)
24in x 19in x 19in
Unit Pack Size (UP_SZ_5154)
5.014 cu ft
Unit Pack Cube (UP_CU_5155)
35.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
14in x 8in x 8in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
66.9 lbs
Unit Pack Weight (UP_WT_5153)
25in x 19in x 17in
Unit Pack Size (UP_SZ_5154)
4.673 cu ft
Unit Pack Cube (UP_CU_5155)
30.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
12.5in x 11in x 11in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
FA
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-P-130, laminated and creped wrapping paper
GH
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
MIL-PRF-26514, Type I, Class 2, Grade C, flexible polyurethane foam, heavy load range
R
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
4 inches thick
ED
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
O
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container is not an acceptable shipping container.
03
Special Marking Code (SP_MKG_CD_5169)
Mehod 50
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
NV
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-1672, Type III, telescoping encapsulated cushioning in reusable box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
19
Special Marking Code (SP_MKG_CD_5169)
Method 50 reusable container
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKCV | Drive Type | SPLINE |
| ASAN | Drive Rotation Direction | COUNTERCLOCKWISE |
| ASAR | Air Inlet Connection Type | FLANGE |
| ARKN | Flange Shape | ROUND |
| ABTB | Mounting Hole Diameter | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABTJ | Mounting Hole Quantity | 2 |
| ASAQ | Pitch Circle Diameter | 1.625 INCHES NOMINAL |
| NMBR | Quantity | 1 |
| ASAX | Quick Detachable Mounting Feature | NOT INCLUDED |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING NO 4P94450-103B |
| SHPE | Shape | ROUND |
| ABKV | Outside Diameter | 8.800 INCHES NOMINAL |
| ARKJ | Standard Mounting Feature | NOT INCLUDED |
Back to TopBack to Top
