3020-00-006-7462
GEAR,SPUR
3020-00-006-7462 (3020000067462, 000067462)
Part Numbers (6 listings): H2-25 | GC15-25 | C48A18-25 | R21A25 | M48A25 | 387689-1 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| H2-25 | 3 - Design Control Reference | 2 - Production Item | ROLLER BEARING COMPANY OF AMERICA, | 00141 |  |
| GC15-25 | 3 - Design Control Reference | 2 - Production Item | SECS, INC. | 23266 |  |
| C48A18-25 | 3 - Design Control Reference | 2 - Production Item | W. M. BERG INC | 29440 |  |
| R21A25 | 3 - Design Control Reference | 2 - Production Item | DESIGNATRONICS INCORPORATED | 00328 | |
| M48A25 | 3 - Design Control Reference | 2 - Production Item | DESIGNATRONICS INC | 12444 | |
| 387689-1 | 7 - Vendor Item Drawing Reference | 2 - Production Item | EDO CORPORATION | 00752 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3020 | 000067462 | A27300 | 05466 | X | 1 | A | N | A | 30 Jun 1972 |
3020
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Gears, Pulleys, Sprockets, and Transmission Chain
A27300
Federal Item Identification Guide (FIIG_4065)
05466
Item Naming Code (INC_4080)
30 Jun 1972
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BC | N9CD | 1 | L | Z | HD | HD | 1 Jul 2005 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
L
Acquisition Method Suffix Code (AMSC_2876)
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | E | AX | D | H2-25 | 00141 | | ||||
| 3 | 3 | 2 | E | AX | D | R21A25 | 00328 | | ||||
| 3 | 3 | 2 | E | AX | D | M48A25 | 12444 | | ||||
| 3 | 3 | 2 | E | AX | D | GC15-25 | 23266 | | ||||
| 3 | 3 | 2 | E | AX | D | C48A18-25 | 29440 | | ||||
| 3 | 7 | 2 | A | AX | D | 387689-1 | 00752 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | AX | 0 | 30 Mar 1975 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
30 Mar 1975
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX | 593 | Z | 9 | A | V | Z | W | 197337 | Z | 96690 | WHEELS-COG-GEAR-PINION-SPROCK |
AX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43216-5000
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
197337
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
96690
Uniform Freight Classification (UFC_CD_MODF_3040)
WHEELS-COG-GEAR-PINION-SPROCK
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | AAA |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 10 | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| MATT | Material | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | Material Document And Classification | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | Surface Treatment | ANODIZE OVERALL |
| STDC | Surface Treatment Document And Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AJLA | Teeth Quantity | 25 |
| CWNH | Tooth Form | STANDARD |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| CWWK | Precision Classification | QUALITY NUMBER 10 |
| STYL | Style Designator | PROTRUDING HUB |
| AGJS | Pitch Diameter | 0.5208 INCHES NOMINAL |
| CWCD | Nominal Outside Diameter | 0.5625 INCHES |
| CWRM | Face Nominal Width | 0.125 INCHES |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.2810 INCHES FIRST END |
| ANTP | Bore Style | PLAIN BOTH ENDS |
| CWRS | Bore Nominal Diameter | 0.2500 INCHES BOTH ENDS |
| CWTR | Hub Style Designator | SPLIT FIRST END |
| CWTX | Hub Nominal Diameter | 0.3105 INCHES FIRST END |
| CWWC | Clamping Surface Nominal Length | 0.2500 INCHES FIRST END |
| AAQL | Body Style | PLAIN, SOLID |
| ABSX | Attachment Method | CLAMP |
| FEAT | Special Features | HUB IS ALSO STEPPED,0.375 IN DIA,0.031 LG |
Back to TopBack to Top
