Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
GB4458 | 3 - Design Control Reference | 2 - Production Item | CARDWELL CONDENSER CORP | 94033 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
30 | 3020 | 000506097 | A27300 | 05466 | X | 1 | A | N | U | 11 May 1967 |
Gears, Pulleys, Sprockets, and Transmission Chain
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YA01 | 1 Aug 2000 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 1 | AX | GB4458 | 94033 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43216-5000
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | AX | 0 | 30 Mar 1975 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CL | Q | 579 | Z | 9 | A | H | Z | Q | 178020 | X | 87470 | SPRINGS-NOI-WIRE-STL |
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
70
Steel Springs, (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
MATT | Material | ALUMINUM ALLOY 5052 OVERALL |
MDCL | Material Document And Classification | QQ-A-318,H34 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
AJLA | Teeth Quantity | 28 |
CWNH | Tooth Form | STANDARD |
CWPP | Pressure Angle | 14.5000 DEGREES |
STYL | Style Designator | PROTRUDING HUBS |
AGJS | Pitch Diameter | 0.5833 INCHES NOMINAL |
CWFR | Nominal Overall Length | 0.406 INCHES |
CWCD | Nominal Outside Diameter | 0.625 INCHES |
CWRM | Face Nominal Width | 0.051 INCHES |
CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.271 INCHES FIRST END |
CWTR | Hub Style Designator | 1 STEP BOTH ENDS |
CWWH | End Nominal Length | 0.063 INCHES SECOND END |
CWWN | End Nominal Diameter | 0.152 INCHES FIRST END |
CWWN | End Nominal Diameter | 0.1550 INCHES SECOND END |
CWWS | First Step Nominal Length | 0.021 INCHES FIRST END |
CWXB | First Step Nominal Diameter | 0.249 INCHES FIRST END |
CWXB | First Step Nominal Diameter | 0.249 INCHES SECOND END |
AAQL | Body Style | PLAIN, SOLID |
FEAT | Special Features | 1ST END HUB FLATTED 180 DEG APART 0.188 IN.WIDTH ACROSS FLATS;1ST STEP 1ST END FLATTED 180 DEG APART 0.079 IN. WIDTH ACROSS FLATS |