3020-00-096-2746
SPROCKET WHEEL
3020-00-096-2746 (3020000962746, 000962746)
Part Numbers (5 listings): 82822B | 81590PC82822B | S4105-422211PC868 | 85111S41-3PC868 | 85111S41-148PC82822B |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 82822B | 3 - Design Control Reference | 2 - Production Item | D.W. HERCULES, LLC | 1ML14 |  |
| 81590PC82822B | 5 - Replaced / Discontinued | 2 - Production Item | D.W. HERCULES, LLC | 1ML14 | |
| S4105-422211PC868 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 |  |
| 85111S41-3PC868 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 | |
| 85111S41-148PC82822B | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 | |
| 82822B | 5 - Replaced / Discontinued | 9 - No Longer Used | HERCULES ENGINE CO INC | 28265 |  |
| 81590PC82822B | 5 - Replaced / Discontinued | 9 - No Longer Used | HERCULES ENGINE CO INC | 28265 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3020 | 000962746 | T353-C | 04456 | X | K | B | N | A | 0 | 1 Jan 1963 |
3020
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Gears, Pulleys, Sprockets, and Transmission Chain
T353-C
Federal Item Identification Guide (FIIG_4065)
04456
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
| N9BC | N9CD | 3 | H | Z | HD | HD | 1 Jul 2005 | |||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
H
Acquisition Method Suffix Code (AMSC_2876)
The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 82822B | 1ML14 | | ||||||
| 5 | 2 | 5 | ZZ | 81590PC82822B | 1ML14 | | ||||||
| 3 | 5 | 9 | 5 | ZZ | B | 81590PC82822B | 28265 | | ||||
| 3 | 5 | 9 | 5 | ZZ | B | 82822B | 28265 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | AX | 0 | 25 Oct 1970 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
25 Oct 1970
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | V | Z | S | 117020 | X | 59820 | CHAIN-AND-SPROCKET-DRIVES-WHEELS |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
S
Less Than Truckload (CLAS_RTNG_CD_2770)
60
117020
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
59820
Uniform Freight Classification (UFC_CD_MODF_3040)
CHAIN-AND-SPROCKET-DRIVES-WHEELS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BYZF | Distance From Outside Flange/Rim To Hub End And Location | 1.750 INCHES NOMINAL AA END AND 0.406 INCHES NOMINAL BB END |
| CLYS | Distance From Outside Flange/Rim To Hub End And Location | 1.750 INCHES NOMINAL AA END |
| AGGP | Drilled Hole Diameter | 0.375 INCHES NOMINAL |
| BYFH | Belt/Chain/Film Size For Which Designed | SILENT CHAIN |
| BYFS | Bore Bearing | NOT INCLUDED |
| ABXV | Bore Diameter | 1.562 INCHES NOMINAL |
| ADGE | Bore Length | 4.156 INCHES NOMINAL |
| ASBP | Bore Type | STRAIGHT |
| BYFM | Center To Center Distance Between Teeth Rows | 1.062 INCHES NOMINAL |
| AAWZ | Counterbore Depth | 1.250 INCHES NOMINAL AND 1.312 INCHES NOMINAL AND 0.785 INCHES NOMINAL |
| AAWY | Counterbore Diameter | 1.875 INCHES NOMINAL AND 2.125 INCHES NOMINAL AND 2.440 INCHES NOMINAL |
| AXND | Counterbore Feature | INCLUDED |
| BDYS | Counterbore Location | BOTH ENDS |
| ARJD | Design Form | PLAIN |
| AQPL | Face Width | 2.000 INCHES NOMINAL |
| BYZL | First Step Face Largest Diameter And Location | 2.500 INCHES NOMINAL AA END |
| BYZN | First Step Length And Location | 0.562 INCHES NOMINAL AA END |
| BYFB | Groove/Step Location | AA END |
| BDRB | Groove Position | LOCATED IN CENTER |
| AXHQ | Groove Quantity | 1 |
| BYFQ | Hardness Rating Test Method | ROCKWELL |
| BMHW | Guide Type | GROOVE |
| AQWM | Guide | INCLUDED |
| BFYT | Hole Location | LOCATED 180 DEG APART AND 0.500 IN. FROM END |
| BYZD | Hub End Outside Diameter And Location | 2.361 INCHES NOMINAL AA END AND 4.625 INCHES NOMINAL BB END |
| CLYR | Hub End Outside Diameter And Location | 2.361 INCHES NOMINAL AA END |
| BYFW | Hub External Keyway | NOT INCLUDED |
| MDCL | Material Document And Classification | QQ-S-624, COMP 1340-CANCELED FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | STEEL COMP 1340 |
| ASXJ | Metallic Hardness Rating And Location | 55.0 ROCKWELL C MINIMUM BODY AND 60.0 ROCKWELL C MAXIMUM BODY AND 55.0 ROCKWELL C MINIMUM HUB AND 60.0 ROCKWELL C MAXIMUM HUB |
| ABHE | Outside Diameter | 5.257 INCHES NOMINAL |
| STYL | Style Designator | PLAIN |
| BSGG | Keying Facility | NOT INCLUDED |
| BXSJ | Lightening Hole | NOT INCLUDED |
| BYDZ | Protruding Hub Characteristic | STEPPED |
| BYZM | Second Step Face Largest Diameter And Location | 2.750 INCHES NOMINAL AA END |
| BYZP | Second Step Length And Location | 0.625 INCHES NOMINAL AA END |
| AHYF | Securing Hole Quantity | 2 |
| BYFF | Securing Location | AA END |
| BSNP | Securing Method | DRILLED HOLE |
| ABHP | Overall Length | 4.156 INCHES NOMINAL |
| AGJS | Pitch Diameter | 5.257 INCHES NOMINAL |
| BYFR | Teeth Hardness Rating | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM |
| BYFN | Teeth Quantity Per Row | 44 |
| BYFL | Teeth Row Quantity | 2 |
| BYZX | Third Step Length And Location | 0.562 INCHES NOMINAL AA END |
| BYGF | Tooth Pitch | 0.375 INCHES NOMINAL |
Back to TopBack to Top
