3020-00-102-6298
GEAR,BEVEL
3020-00-102-6298 (3020001026298, 001026298)
Part Number (1 listing): 639E875P3
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 639E875P3 | 3 - Design Control Reference | 2 - Production Item | GENERAL ELECTRIC COMPANY | 07482 |  |
| 639E875P3 | 5 - Replaced / Discontinued | 2 - Production Item | ARROW GEAR COMPANY (INC) | 28596 |  |
| 639E875P3 | 8 - NATO Reproduced Item | 2 - Production Item | MTU AERO ENGINES AG | D3309 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
8 - NATO Reproduced Item
Reference Number Category Code (DRN_2910)
US/NATO-Reproduced Item Identification Number. A number representing a reproduction of an item of production by a NATO country (including the United States) for which authorization to use the NATO/National Stock Number has been granted by the originating country. The reproduced item represents the same item of production as the original item.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3020 | 001026298 | A27300 | 05463 | X | K | B | N | U | 14 Jun 1974 |
3020
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Gears, Pulleys, Sprockets, and Transmission Chain
A27300
Federal Item Identification Guide (FIIG_4065)
05463
Item Naming Code (INC_4080)
14 Jun 1974
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DGX1 | 2 | L | 1 Jan 2006 | |||||||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
L
Acquisition Method Suffix Code (AMSC_2876)
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 3 | 2 | 5 | AX | A | 639E875P3 | 07482 | | ||||
| 5 | 2 | 6 | AX | 639E875P3 | 28596 | | ||||||
| 3 | 8 | 2 | 3 | ZG | D | 639E875P3 | D3309 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
8
Reference Number Category Code (RNCC_2910)
US/NATO-Reproduced Item Identification Number. A number representing a reproduction of an item of production by a NATO country (including the United States) for which authorization to use the NATO/National Stock Number has been granted by the originating country. The reproduced item represents the same item of production as the original item.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | AX | 0 | 29 Nov 1977 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
29 Nov 1977
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 586 | Z | 9 | A | V | Z | P | 121870 | X | 64910 | GEAR-SPEED-INCREASING-REDUCING-MACH |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
586
Water Commodity Code (WRT_CMDTY_CD_9275)
Vehicle Parts, Other Than Automobile
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
121870
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
64910
Uniform Freight Classification (UFC_CD_MODF_3040)
GEAR-SPEED-INCREASING-REDUCING-MACH
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
Z
Quantity Unit Pack (QUP_6106)
* Special Requirements
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
1
Quantity Unit Pack (QUP_6106)
1
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | AAA | 2.2 lbs |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | X | BE | ED | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
2.2 lbs
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
10
Preservation Material Code (PRSRV_MAT_CD_5162)
MIL-PRF-21260, preservative and break-in lubricating oil, internal combustion engine, Grade 10, 30 or 50
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
BE
Unit Container Code (UNIT_CTNR_CD_5166)
MIL-DTL-117, Type II, Class C, Style 1, heavy duty, waterproof, greaseproof, opaque bag.
ED
Intermediate Container Code (INTMD_CTNR_CD_5167)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAQL | Body Style | PLAIN, SOLID |
| CWRS | Bore Nominal Diameter | 0.750 INCHES BOTH ENDS |
| ANTP | Bore Style | PLAIN BOTH ENDS |
| CWRM | Face Nominal Width | 0.870 INCHES |
| CQFM | Hardness Rating | 85.5 ROCKWELL SUPERFICIAL 15-N NOMINAL HUB |
| CWTX | Hub Nominal Diameter | 1.378 INCHES FIRST END |
| CWTR | Hub Style Designator | THREADED SECOND END |
| CWTR | Hub Style Designator | PLAIN FIRST END |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.834 INCHES FIRST END |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 1.630 INCHES SECOND END |
| CWFR | Nominal Overall Length | 3.462 INCHES |
| CWCD | Nominal Outside Diameter | 4.623 INCHES |
| MATT | Material | STEEL OVERALL |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| CWQD | Pitch Angle | 39.6000 DEGREES |
| AGJS | Pitch Diameter | 4.3750 INCHES NOMINAL |
| STYL | Style Designator | PERIPHERAL FACE, PROTRUDING HUBS |
| AJLA | Teeth Quantity | 23 |
| CWMW | Teeth Type | ZEROL |
Back to TopBack to Top
