3020-00-200-2111
GEAR,HELICAL
3020-00-200-2111 (3020002002111, 002002111)
Part Numbers (9 listings): 22049B | 512135 | 2BL0-76 | 52006 | 188595 | 1B8595 | 643358 | 05MBL1 | L12135 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 22049B | 3 - Design Control Reference | 2 - Production Item | D.W. HERCULES, LLC | 1ML14 |  |
| 512135 | 3 - Design Control Reference | 2 - Production Item | WEST SALEM MACHINERY COMPANY | 53930 |  |
| 2BL0-76 | 5 - Replaced / Discontinued | 2 - Production Item | VOLVO TRUCKS NORTH AMERICA INC. | 62265 |  |
| 52006 | 5 - Replaced / Discontinued | 2 - Production Item | NACCO MATERIALS HANDLING GROUP INC | 30076 |  |
| 188595 | 5 - Replaced / Discontinued | 2 - Production Item | NAPCO INTERNATIONAL LLC | 95201 |  |
| 1B8595 | 5 - Replaced / Discontinued | 2 - Production Item | NAPCO INTERNATIONAL LLC | 95201 | |
| 643358 | 5 - Replaced / Discontinued | 9 - No Longer Used | SASCO INC CANADIAN DIV | 58275 |  |
| 22049B | 5 - Replaced / Discontinued | 9 - No Longer Used | CYCLONE DRILL CO | 52984 | |
| 05MBL1 | 5 - Replaced / Discontinued | 9 - No Longer Used | LINDE LIFT TRUCK CORP. | 05415 |  |
| 22049B | 5 - Replaced / Discontinued | 9 - No Longer Used | O K MACHINERY DIV OF MOTTER JOHN C | 44369 | |
| 22049B | 5 - Replaced / Discontinued | 9 - No Longer Used | HERCULES ENGINE CO INC | 28265 |  |
| 512135 | 5 - Replaced / Discontinued | 9 - No Longer Used | CATERPILLAR INC. | 11083 |  |
| L12135 | 5 - Replaced / Discontinued | 9 - No Longer Used | TOWMOTOR CORP | 73782 | |
| 05MBL1 | C - Advisory Reference | 1 - Incomplete Part Number | LINDE MATERIAL HANDLING NORTH | 556A6 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3020 | 002002111 | A27300 | 05464 | X | 1 | A | N | A | 1 Jan 1963 |
3020
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Gears, Pulleys, Sprockets, and Transmission Chain
A27300
Federal Item Identification Guide (FIIG_4065)
05464
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 1 | AX | 22049B | 1ML14 | | ||||||
| 4 | 3 | 2 | 5 | AX | A | 512135 | 53930 | | ||||
| 4 | 5 | 2 | 5 | AX | A | 52006 | 30076 | | ||||
| 5 | 2 | 5 | AX | D | 2BL0-76 | 62265 | | |||||
| 5 | 2 | 5 | AX | D | 188595 | 95201 | | |||||
| 5 | 2 | 5 | AX | D | 1B8595 | 95201 | | |||||
| 4 | 5 | 9 | 5 | AX | B | L12135 | 73782 | | ||||
| 4 | 5 | 9 | 5 | AX | B | 22049B | 44369 | | ||||
| 4 | 5 | 9 | 5 | AX | B | 22049B | 52984 | | ||||
| 4 | 5 | 9 | 5 | AX | D | 643358 | 58275 | | ||||
| 4 | 5 | 9 | 1 | AX | B | 22049B | 28265 | | ||||
| 4 | 5 | 9 | 5 | AX | B | 05MBL1 | 05415 | | ||||
| 4 | 5 | 9 | 4 | AX | B | 512135 | 11083 | | ||||
| 4 | C | 1 | 5 | ZZ | A | 9F | 05MBL1 | 556A6 | | |||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | AX | 0 | 9 Mar 1973 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
9 Mar 1973
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | B | Z | R | 197339 | X | 96710 | WHEELS-COG-GEAR-PINION-I-S |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
R
Less Than Truckload (CLAS_RTNG_CD_2770)
65
197339
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
96710
Uniform Freight Classification (UFC_CD_MODF_3040)
WHEELS-COG-GEAR-PINION-I-S
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
S9C
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
DLA Land and Maritime, Columbus, OH 43215 ** No longer valid for input **
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 42 | 1 | AAA | 4.6 lbs |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 02 | X | D3 | ED | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
42
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
4.6 lbs
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
02
Preservation Material Code (PRSRV_MAT_CD_5162)
MIL-PRF-16173, Grade 2, corrosion preventive, solvent cutback, cold application, soft film
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
ED
Intermediate Container Code (INTMD_CTNR_CD_5167)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAQL | Body Style | SPOKED |
| CWRS | Bore Nominal Diameter | 1.2495 INCHES FIRST END |
| ANTP | Bore Style | W/ KEYWAY BOTH ENDS |
| CWWN | End Nominal Diameter | 1.936 INCHES SECOND END |
| CWWH | End Nominal Length | 0.077 INCHES SECOND END |
| CWRM | Face Nominal Width | 0.875 INCHES |
| CWXB | First Step Nominal Diameter | 2.750 INCHES SECOND END |
| CWWS | First Step Nominal Length | 0.031 INCHES SECOND END |
| CQFM | Hardness Rating | 12.7 ROCKWELL C MINIMUM OVERALL AND 21.7 ROCKWELL C MAXIMUM OVERALL |
| CWPZ | Helix Angle | 39.5167 DEGREES |
| CWTX | Hub Nominal Diameter | 1.875 INCHES FIRST END |
| CWTR | Hub Style Designator | 1 STEP SECOND END |
| CWSR | Nominal Distance From Bore Center To Keyway Bottom | 0.7457 INCHES FIRST END |
| CWCD | Nominal Outside Diameter | 6.6775 INCHES |
| MATT | Material | STEEL OVERALL |
| CWSN | Keyway Nominal Width | 0.251 INCHES BOTH ENDS |
| CWPP | Pressure Angle | 14.5000 DEGREES |
| AGJS | Pitch Diameter | 6.4780 INCHES MINIMUM AND 6.4800 INCHES MAXIMUM |
| STYL | Style Designator | FLUSH HUB |
| AJLA | Teeth Quantity | 50 |
| CWMW | Teeth Type | SINGLE HELIX |
| CWNM | Tooth Direction | RIGHT |
| CWNH | Tooth Form | STANDARD |
Back to TopBack to Top
