3020-00-351-9592
GEAR,SPUR
3020-00-351-9592 (3020003519592, 003519592)
Part Numbers (12 listings): 4478 | 2B8184 | 77147H | 8B1075 | 8B6015 | 8184 | 3T5303 | V3098X | 33-77147H | 2859J | 73833 | 5488F |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 4478 | 3 - Design Control Reference | 2 - Production Item | MCQUAY-NORRIS INC | 76255 |  |
| 2B8184 | 5 - Replaced / Discontinued | 2 - Production Item | FWD SEAGRAVE HOLDINGS, LP | 23382 |  |
| 77147H | 5 - Replaced / Discontinued | 2 - Production Item | NAVISTAR INTL CORP | 89346 |  |
| 8B1075 | 5 - Replaced / Discontinued | 2 - Production Item | NAPCO INTERNATIONAL LLC | 95201 |  |
| 8B6015 | 5 - Replaced / Discontinued | 2 - Production Item | NAPCO INTERNATIONAL LLC | 95201 | |
| 8184 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL FIRE EXTINGUISHER CORP | 99539 | |
| 3T5303 | 5 - Replaced / Discontinued | 9 - No Longer Used | WHITE MOTOR CORP | 65282 |  |
| V3098X | 5 - Replaced / Discontinued | 9 - No Longer Used | WHITE MOTOR CORP | 65282 | |
| 33-77147H | 5 - Replaced / Discontinued | 9 - No Longer Used | LIFT PARTS MFG CO INC | 16662 |  |
| 8184 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOEHRING CRANES AND EXCAVATORS INC | 8E499 |  |
| 4478 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOEHRING CRANES AND EXCAVATORS INC | 8E499 | |
| 8184 | 5 - Replaced / Discontinued | 9 - No Longer Used | EATON CORP | 73460 |  |
| 2859J | 5 - Replaced / Discontinued | 9 - No Longer Used | DIAMOND REO TRUCK CO | 56442 |  |
| 73833 | 5 - Replaced / Discontinued | 9 - No Longer Used | LITTLE GIANT CRANE AND SHOVEL INC | 95097 | |
| 5488F | 5 - Replaced / Discontinued | 9 - No Longer Used | OSHKOSH CORPORATION | 45152 |  |
| 77147H | 5 - Replaced / Discontinued | 9 - No Longer Used | NAVISTAR INTL CORP | 31007 |  |
| 8184 | 5 - Replaced / Discontinued | 9 - No Longer Used | DUPLEX DIV WARNER AND SWASEY CO | 18859 | |
| 4478 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOEHRING CO | 59690 |  |
| 8184 | 5 - Replaced / Discontinued | 9 - No Longer Used | KOEHRING CO | 59690 | |
| 33-77147H | C - Advisory Reference | 1 - Incomplete Part Number | TVH PARTS CO. | 66654 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3020 | 003519592 | A27300 | 05466 | X | K | A | N | U | 1 Jan 1963 |
3020
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Gears, Pulleys, Sprockets, and Transmission Chain
A27300
Federal Item Identification Guide (FIIG_4065)
05466
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YK01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 3 | 2 | 1 | AX | A | 4478 | 76255 | | ||||
| 5 | 2 | 5 | AX | 77147H | 89346 | | ||||||
| 1 | 5 | 9 | 5 | AX | B | 2859J | 56442 | | ||||
| 3 | 5 | 9 | 5 | AX | B | 4478 | 59690 | | ||||
| 3 | 5 | 9 | 5 | AX | B | 8184 | 59690 | | ||||
| 5 | 9 | 5 | AX | 4478 | 8E499 | | ||||||
| 5 | 9 | 5 | AX | 8184 | 8E499 | | ||||||
| 3 | 5 | 9 | 5 | AX | B | 73833 | 95097 | | ||||
| 3 | 5 | 9 | 5 | AX | B | 33-77147H | 16662 | | ||||
| 3 | C | 1 | 5 | ZZ | D | 9F | 33-77147H | 66654 | | |||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | AX | 0 | 11 Mar 1972 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
11 Mar 1972
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 593 | Z | 9 | A | B | Z | R | 197339 | X | 96710 | WHEELS-COG-GEAR-PINION-I-S |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
S
Less Than Carload (LCL_CD_2760)
60
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
R
Less Than Truckload (CLAS_RTNG_CD_2770)
65
197339
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
96710
Uniform Freight Classification (UFC_CD_MODF_3040)
WHEELS-COG-GEAR-PINION-I-S
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
S9C
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
DLA Land and Maritime, Columbus, OH 43215 ** No longer valid for input **
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAQL | Body Style | WEBBED, SOLID |
| CWRS | Bore Nominal Diameter | 2.251 INCHES BOTH ENDS |
| ANTP | Bore Style | W/ KEYWAY BOTH ENDS |
| CWRM | Face Nominal Width | 0.687 INCHES |
| CWTR | Hub Style Designator | PLAIN BOTH ENDS |
| CWTX | Hub Nominal Diameter | 2.750 INCHES FIRST END |
| CWTX | Hub Nominal Diameter | 2.750 INCHES SECOND END |
| CWSR | Nominal Distance From Bore Center To Keyway Bottom | 1.317 INCHES BOTH ENDS |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.547 INCHES SECOND END |
| CWFR | Nominal Overall Length | 2.235 INCHES |
| CWCD | Nominal Outside Diameter | 8.085 INCHES |
| MATT | Material | STEEL COMP 1045 OVERALL |
| CWSN | Keyway Nominal Width | 0.378 INCHES BOTH ENDS |
| MDCL | Material Document And Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1045 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AGJS | Pitch Diameter | 7.8330 INCHES NOMINAL |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| STYL | Style Designator | PROTRUDING HUBS |
| AJLA | Teeth Quantity | 47 |
| CWNH | Tooth Form | STANDARD |
Back to TopBack to Top
