3040-00-585-3653
WORM SHAFT
3040-00-585-3653 (3040005853653, 005853653)
Part Numbers (3 listings): W65C49 | SG3658PC61 | WC5729PC56 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| W65C49 | 3 - Design Control Reference | 9 - No Longer Used | IMO INDUSTRIES INC | 15330 |  |
| SG3658PC61 | 5 - Replaced / Discontinued | 2 - Production Item | IMO INDUSTRIES INC. | 59180 |  |
| WC5729PC56 | 5 - Replaced / Discontinued | 9 - No Longer Used | IMO INDUSTRIES INC | 15330 | |
| SG3658PC61 | 5 - Replaced / Discontinued | 9 - No Longer Used | SIEMENS DEMAG DELAVAL | 16712 |  |
| W65C49 | 5 - Replaced / Discontinued | 9 - No Longer Used | SIEMENS DEMAG DELAVAL | 16712 | |
| WC5729PC56 | 5 - Replaced / Discontinued | 9 - No Longer Used | SIEMENS DEMAG DELAVAL | 16712 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3040 | 005853653 | T246-C | 18249 | X | K | A | N | A | 1 Jan 1963 |
T246-C
Federal Item Identification Guide (FIIG_4065)
18249
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BC | N9CD | 3 | D | Z | HD | HD | 1 Jul 2005 | |||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
D
Acquisition Method Suffix Code (AMSC_2876)
The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 9 | 5 | AX | W65C49 | 15330 | | ||||||
| 5 | 2 | 5 | HD | SG3658PC61 | 59180 | | ||||||
| 5 | 9 | 1 | HD | WC5729PC56 | 15330 | | ||||||
| 3 | 5 | 9 | X | AX | B | W65C49 | 16712 | | ||||
| 1 | 5 | 9 | 1 | HD | B | WC5729PC56 | 16712 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
X
Document Availability Code (DAC_2640)
DAC not known. Found on U.S. NSNs that were assigned before 1975. Cannot be used for new item assignment, or any maintenance action on older NSNs.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 98 | 0 | 1 Feb 1975 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
98
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Feb 1975
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | V | Z | M | 129920 | X | 65750 | SHAFTS-SHAFTING-FLEX-NOI-STL |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
M
Less Than Truckload (CLAS_RTNG_CD_2770)
85
129920
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
65750
Uniform Freight Classification (UFC_CD_MODF_3040)
SHAFTS-SHAFTING-FLEX-NOI-STL
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | AAA | 30.0 lbs |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 01 | X | ED | ED | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
30.0 lbs
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
01
Preservation Material Code (PRSRV_MAT_CD_5162)
MIL-PRF-16173, Grade 1, corrosion preventive, solvent cutback, cold application, hard film
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
ED
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
ED
Intermediate Container Code (INTMD_CTNR_CD_5167)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAHN | End Similarity | NOT IDENTICAL |
| MATT | Material | STEEL,MIL-S-5000,COND E2 |
| ABRR | Keyway Width | 0.250 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| ABRV | Keyway Depth | 0.094 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| AJYP | Screw Thread Series Designator | 12N OR 12UN FIRST END, SECOND PORTION |
| AJYP | Screw Thread Series Designator | UNS SECOND END, SEVENTH PORTION |
| CFFW | Shaft Location | BOTH ENDS OF WORM |
| CFFM | Shaft Hardness Rating | 37.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| AKAF | Shaft Thread Direction | RIGHT-HAND SECOND END, SEVENTH PORTION |
| AKAF | Shaft Thread Direction | RIGHT-HAND FIRST END, SECOND PORTION |
| ABHP | Overall Length | 27.344 INCHES NOMINAL |
| CFGB | Unthreaded Section Keyway Depth | 0.140 INCHES MAXIMUM SECOND END, SEVENTH PORTION |
| CFGB | Unthreaded Section Keyway Depth | 0.135 INCHES MINIMUM SECOND END, SEVENTH PORTION |
| CFFZ | Unthreaded Section Keyway Width | 0.2500 INCHES MINIMUM SECOND END, SEVENTH PORTION |
| CFFZ | Unthreaded Section Keyway Width | 0.2520 INCHES MAXIMUM SECOND END, SEVENTH PORTION |
| CFFP | Worm Body Length | 4.750 INCHES NOMINAL |
| CFFQ | Worm Body Tapered Bearing Surface End | NOT PROVIDED |
| CFFG | Worm Helix Angle | 18 DEG 50 MIN |
| CFFK | Worm Outside Diameter | 3.517 INCHES MINIMUM AND 3.519 INCHES MAXIMUM |
| CFFF | Worm Pressure Angle In Deg | 27.500 |
| CFFL | Worm Pitch Diameter | 2.623 INCHES NOMINAL |
| CFFD | Worm Thread Direction | RIGHT-HAND |
| CFFB | Worm Thread Quantity | 2 |
| CFFC | Worm Thread Lead | 2.8125 INCHES NOMINAL |
| CFFN | Worm Thread Section Length | 4.750 INCHES NOMINAL |
| CFFX | Straight Unthreaded Length | 0.086 INCHES MINIMUM SECOND END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 0.091 INCHES MAXIMUM SECOND END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 0.250 INCHES NOMINAL SECOND END, FIFTH PORTION |
| CFFX | Straight Unthreaded Length | 1.125 INCHES NOMINAL SECOND END, SIXTH PORTION |
| CFFX | Straight Unthreaded Length | 1.274 INCHES MINIMUM SECOND END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 1.279 INCHES MAXIMUM SECOND END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 2.375 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 2.688 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| CFFX | Straight Unthreaded Length | 3.750 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFX | Straight Unthreaded Length | 4.063 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFX | Straight Unthreaded Length | 4.422 INCHES NOMINAL SECOND END, FOURTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.1245 INCHES MAXIMUM SECOND END, SEVENTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.1240 INCHES MINIMUM SECOND END, SEVENTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.1809 INCHES MINIMUM SECOND END, SIXTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.1812 INCHES MAXIMUM SECOND END, SIXTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.625 INCHES NOMINAL SECOND END, FIFTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.9683 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.9686 INCHES MAXIMUM FIRST END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.051 INCHES MINIMUM SECOND END, THIRD PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.063 INCHES MAXIMUM SECOND END, THIRD PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.1656 INCHES MAXIMUM SECOND END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.155 INCHES MINIMUM SECOND END, FOURTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.160 INCHES MAXIMUM SECOND END, FOURTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.1652 INCHES MINIMUM SECOND END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.500 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.500 INCHES NOMINAL SECOND END, FIRST PORTION |
| BYFR | Teeth Hardness Rating | 37.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| AASA | Thread Length | 0.750 INCHES NOMINAL SECOND END, SEVENTH PORTION |
| AASA | Thread Length | 1.813 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFQP | Threaded Section Pin Hole Diameter | 0.219 INCHES NOMINAL FIRST END, SECOND PORTION |
Back to TopBack to Top
