3040-00-585-8590
WORM SHAFT
3040-00-585-8590 (3040005858590, 005858590)
Part Numbers (2 listings): 741C289-1 | 741C289PC1 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 741C289-1 | 3 - Design Control Reference | 9 - No Longer Used | GENERAL ELECTRIC CO | 81893 |  |
| 741C289-1 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL ELECTRIC COMPANY | 01289 |  |
| 741C289-1 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL ELECTRIC CO | 24446 |  |
| 741C289PC1 | 5 - Replaced / Discontinued | 2 - Production Item | GENERAL ELECTRIC CO | 24446 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3040 | 005858590 | T246-C | 18249 | X | K | A | N | A | 1 Jan 1963 |
T246-C
Federal Item Identification Guide (FIIG_4065)
18249
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BC | N9CD | 1 | C | Z | HD | HD | 1 Jul 2005 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 9 | 6 | AX | D | 741C289-1 | 81893 | | ||||
| 5 | 2 | 6 | AX | 741C289-1 | 01289 | | ||||||
| 3 | 5 | 2 | 6 | AX | D | 741C289-1 | 24446 | | ||||
| 1 | 5 | 2 | 1 | HD | B | 741C289PC1 | 24446 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 98 | 0 | 1 Feb 1975 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
98
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Feb 1975
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | V | Z | M | 129920 | X | 65750 | SHAFTS-SHAFTING-FLEX-NOI-STL |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
M
Less Than Truckload (CLAS_RTNG_CD_2770)
85
129920
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
65750
Uniform Freight Classification (UFC_CD_MODF_3040)
SHAFTS-SHAFTING-FLEX-NOI-STL
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAHN | End Similarity | NOT IDENTICAL |
| MATT | Material | STEEL,B50AM400-J,GENERAL ELECTRIC CO |
| ZZZV | Fsc Application Data | STEAM TURBINE |
| CFFW | Shaft Location | BOTH ENDS OF WORM |
| CFFM | Shaft Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM |
| ABHP | Overall Length | 18.500 INCHES NOMINAL |
| CFGB | Unthreaded Section Keyway Depth | 0.1875 INCHES NOMINAL SECOND END, FIFTH PORTION |
| CFFZ | Unthreaded Section Keyway Width | 0.3700 INCHES MINIMUM SECOND END, FIFTH PORTION |
| CFFZ | Unthreaded Section Keyway Width | 0.3720 INCHES MAXIMUM SECOND END, FIFTH PORTION |
| CFFP | Worm Body Length | 9.062 INCHES NOMINAL |
| CFFQ | Worm Body Tapered Bearing Surface End | NOT PROVIDED |
| CFFG | Worm Helix Angle | 15 DEG 54 MIN 37.46 SEC |
| CFFK | Worm Outside Diameter | 2.312 INCHES MINIMUM AND 2.314 INCHES MAXIMUM |
| CFFL | Worm Pitch Diameter | 2.010 INCHES NOMINAL |
| CFFF | Worm Pressure Angle In Deg | 25.000 |
| CFFD | Worm Thread Direction | RIGHT-HAND |
| CFFC | Worm Thread Lead | 1.800 INCHES NOMINAL |
| CFFB | Worm Thread Quantity | 3 |
| CFFN | Worm Thread Section Length | 6.500 INCHES NOMINAL |
| CFFX | Straight Unthreaded Length | 0.056 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 0.060 INCHES MAXIMUM FIRST END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 0.068 INCHES MINIMUM SECOND END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 0.072 INCHES MAXIMUM SECOND END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 0.240 INCHES NOMINAL SECOND END, FOURTH PORTION |
| CFFX | Straight Unthreaded Length | 0.250 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFX | Straight Unthreaded Length | 0.828 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFX | Straight Unthreaded Length | 0.924 INCHES MINIMUM FIRST END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 0.928 INCHES MAXIMUM FIRST END, THIRD PORTION |
| CFFX | Straight Unthreaded Length | 1.437 INCHES MINIMUM SECOND END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 1.438 INCHES MAXIMUM SECOND END, SECOND PORTION |
| CFFX | Straight Unthreaded Length | 6.250 INCHES NOMINAL SECOND END, FIFTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.306 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.314 INCHES MAXIMUM FIRST END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.3785 INCHES MAXIMUM FIRST END, FIRST PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.3781 INCHES MINIMUM FIRST END, FIRST PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.4995 INCHES MINIMUM SECOND END, FIFTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.485 INCHES MINIMUM SECOND END, THIRD PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.495 INCHES MAXIMUM SECOND END, THIRD PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.5000 INCHES MAXIMUM SECOND END, FIFTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.5749 INCHES MINIMUM SECOND END, FOURTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.5749 INCHES MINIMUM SECOND END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.5753 INCHES MAXIMUM SECOND END, FOURTH PORTION |
| CFFY | Straight Unthreaded Section Diameter | 1.5753 INCHES MAXIMUM SECOND END, SECOND PORTION |
| CFFY | Straight Unthreaded Section Diameter | 2.000 INCHES NOMINAL SECOND END, FIRST PORTION |
| BYFR | Teeth Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM |
Back to TopBack to Top
