3040-00-808-7441
SHAFT,SHOULDERED
3040-00-808-7441 (3040008087441, 008087441)
Part Numbers (3 listings): 11621145 | 3040008087441 | 388Q1109 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 11621145 | 3 - Design Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
| 3040008087441 | 5 - Replaced / Discontinued | 9 - No Longer Used | E.C.A ETABLISSEMENT | SCY13 |  |
| 388Q1109 | 5 - Replaced / Discontinued | 9 - No Longer Used | MERITOR HEAVY VEHICLE SYSTEMS LLC | 78500 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 3040 | 008087441 | A23200 | 22914 | X | K | A | N | U | 8 May 1968 |
A23200
Federal Item Identification Guide (FIIG_4065)
22914
Item Naming Code (INC_4080)
8 May 1968
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Jan 2003 | |||||||||||||||||||||||||||||
| WB01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
| A920 | A181 | 1 | G | Z | AZ | AZ | BD | 1 Jul 2005 | ||||||||||||||||||||||
| MC40 | MC01 | 1 | G | Z | PA | 1 Jul 2005 | ||||||||||||||||||||||||
| YP01 | 1 Nov 2008 | |||||||||||||||||||||||||||||
| YD01 | 1 Jul 2016 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
AZ
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
AZ
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
BD
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 5 | AZ | D | 11621145 | 19207 | | ||||
| 3 | 5 | 9 | 5 | AZ | D | 388Q1109 | 78500 | | ||||
| 4 | 5 | 9 | 9 | YP | B | 3040008087441 | SCY13 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
AZ
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
9
Document Availability Code (DAC_2640)
The reference number is of the type for which an indication of document availability is not required.
YP
Reference Number Action Activity Code (RNAAC_2900)
Morocco
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | AX | 0 | 14 Feb 1973 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
14 Feb 1973
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 593 | Z | 9 | A | V | Z | W | 126900 | Z | 65750 | POWER-TRANS-SHAFTING-SHAFTS |
BE
Originating Activity Code (ORIG_ACTY_CD_4210)
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
126900
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
65750
Uniform Freight Classification (UFC_CD_MODF_3040)
POWER-TRANS-SHAFTING-SHAFTS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 20 | 1 | 000 | 15.0 lbs | 0.152 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 49 | GH | NA | X | E5 | 00 | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
20
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preservative coating only (with greaseproof wrap, as required)
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
15.0 lbs
Unit Pack Weight (UP_WT_5153)
0.152 cu ft
Unit Pack Cube (UP_CU_5155)
49
Preservation Material Code (PRSRV_MAT_CD_5162)
Vendor's protective grease or oil coating
GH
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, Type II, light duty, greaseproof, waterproof barrier
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
E5
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAHN | End Similarity | NOT IDENTICAL |
| AMDL | First End Diameter | 1.7719 INCHES NOMINAL |
| AMDM | First End Spline Length | 0.969 INCHES NOMINAL |
| AMDP | First End Spline Major Diameter | 1.7719 INCHES NOMINAL |
| AMDN | First End Spline Minor Diameter | 1.4830 INCHES NOMINAL |
| BDSQ | First End Spline Quantity | 17 |
| AAGZ | First End Style | SPLINED (STRAIGHT) |
| MDCL | Material Document And Classification | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | STEEL COMP 4620H OR STEEL COMP 8620H |
| CSPY | Largest Step Diameter | 2.994 INCHES NOMINAL |
| AMFZ | Second End Diameter | 1.0000 INCHES NOMINAL |
| AMGT | Second End Distance From Hole Center To End | 0.344 INCHES NOMINAL |
| AMHA | Second End External Thread Length | 0.813 INCHES NOMINAL |
| AMHD | Second End Hole Depth | 1.000 INCHES NOMINAL |
| AMGS | Second End Hole Diameter | 0.1563 INCHES NOMINAL |
| AAHP | Second End Style | CROSS DRILLED AND EXTERNALLY THREADED |
| ABHP | Overall Length | 14.563 INCHES NOMINAL |
| FEAT | Special Features | CENTER SPLINED 2.994 IN. MAJOR DIA,2.520 IN. MINOR DIA,20 DEG PRESSURE ANGLE,17 TEETH;2NT END HAS SECOND HOLE SAME AS STYLE AT 90 DEG TO 1ST HOLE |
| ATPC | Step Quantity | 6 |
| CSYM | Surface Finish | 350.0 MICROINCHES |
Back to TopBack to Top
