Summary

FSG 31 / FSC 3110

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 1 Jan 1963

Unit Weight: 1.0 lbs

Unit Size: 8in x 8in x 4in

Unit Pack Cube: 0.148 cu ft

MSDS: None

Hazmat: None

;

MASTER CROSS REFERENCE LIST (MCRL) | NSN 3110-00-474-9232 Submit RFQ

Manufacturer Part Number	RNCC	RNVC	Manufacturer Name	CAGE
204-011-112-1	1 - Source of Control Reference	2 - Production Item	BELL HELICOPTER TEXTRON INC.	97499
77JTG2486-9D1AND1R722677-9D	3 - Design Control Reference	2 - Production Item	RBC BEARINGS INCORPORATED	51588
B5748B	3 - Design Control Reference	2 - Production Item	TIMKEN AEROSPACE, INC	60380
204-011-112-001	5 - Replaced / Discontinued	2 - Production Item	BELL HELICOPTER TEXTRON INC.	97499
204-011-112-003	5 - Replaced / Discontinued	2 - Production Item	BELL HELICOPTER TEXTRON INC.	97499

Code Definitions

1 - Source of Control Reference

Reference Number Category Code (DRN_2910)

Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)

3 - Design Control Reference

Reference Number Category Code (DRN_2910)

Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)

Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

2 - Production Item

Reference Number Variation Code (DRN_4780)

A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

FLIS - SEG A - IDENTIFICATION | NSN 3110-00-474-9232 Submit RFQ

FSG	FSC	NIIN	FIIG	INC	CRITICALITY	TYPE OF ITEM	MRC	DEMIL	HMIC	EDC	PMIC	ADPEC	DATE CREATED
31	3110	004749232	A044A0	00017	X	1		A	N		U		1 Jan 1963

Code Definitions

31 Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)

Bearings

3110

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)

Bearings, Antifriction, Unmounted

004749232

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)

NSN 3110-00-474-9232

A044A0

Federal Item Identification Guide (FIIG_4065)

00017

Item Naming Code (INC_4080)

1 Jan 1963

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

1 Type of Item Identification (TYP_II_4820)

Full Descriptive Item Identification

A

Demilitarization Code (DEMIL_CD_0167)

Non-MLI/ Non-SLI — Demilitarization not required.

N

Hazardous Material Indicator Code (HMIC_0865)

Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

U

Precious Metals Indicator Code (PMIC_0802)

Precious Metal Content is unknown.

Similar & Related NSN Parts

3110-00-224-9419 3110-00-224-9420 3110-00-227-2018 3110-00-227-3074 3110-00-227-3671 3110-00-227-3672 3110-00-227-4606 3110-00-151-8316 3110-00-153-2674 3110-00-249-5244 3110-00-171-2400 3110-00-104-2271 3110-00-108-7788 3110-00-108-7794

FLIS - SEG B - MOE RULE DATA | NSN 3110-00-474-9232 Submit RFQ

MOE Rule	Former MOE	AMC	AMSC	IMC	AAC	Receivers	Effective Date
G860		0	0		C		1 Apr 1991
YB01							1 Apr 1991
YJ01							1 Apr 1991
ZE01							1 Apr 1991
ZG01							1 Apr 1991
ZH01							1 Apr 1991
ZU01							1 Apr 1991
ZR01							1 Jun 1997
ZW01							1 Nov 1998
YA01							1 Sep 2000
A703	A740	2	Q	J		BN	1 May 2007
YC01							1 Jul 2015

Code Definitions

0 Acquisition Method Code (AMC_2871)

Not Established

C

Acquisition Advice Code (AAC_2507)

SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.

2 Acquisition Method Code (AMC_2871)

Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.

Q

Acquisition Method Suffix Code (AMSC_2876)

The government does not have adequate data, lacks rights to data, or both, needed to purchase this part from additional sources. Valid AMCs: 1, 2, 3, 4 and 5.

J

Item Management Code (IMC_2744)

Design Unstable: Items determined by technical decision during the provisioning cycle, during introduction into logistic systems, or at time of item management coding, to be highly subject to either: (A) Design change of the item itself, or (B) Replacement of the item itself through modification of the applicable next-higher assembly. These items will be reviewed for recording when an IM is notified that the item is used by another service/agency, when the design becomes stabilized, or when the item has been in operational use for two years. In all cases these shall be reviewed by IM for IMC change no longer than two years after the IMC J assignment.

BN

Supplementary Receivers (SUPPLM_RCVR_2534)

U.S. Army Tank Automotive and Armaments, Command, NAMI PSID, Rock Island Arsenal, IL 61299-6000

FLIS - SEG C - REFERENCE NUMBER | NSN 3110-00-474-9232 Submit RFQ

RNFC	RNCC	RNVC	DAC	RNAAC	RNSC	Reference Number	CAGE
3	1	2	1	CT	D	204-011-112-1	97499
3	3	2	5	CT	D	77JTG2486-9D1AND1R722677-9D	51588
3	3	2	5	CT	D	B5748B	60380
	5	2	5	9Z	D	204-011-112-001	97499
4	5	2	6	9Z	D	204-011-112-003	97499

Code Definitions

3 Reference Number Format Code (RNFC_2920)

Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)

1 Reference Number Category Code (RNCC_2910)

2 Reference Number Variation Code (RNVC_4780)

1 Document Availability Code (DAC_2640)

The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.

CT

Reference Number Action Activity Code (RNAAC_2900)

U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230

D

Reference Number Status Code (RNSC_2923)

Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

3 Reference Number Category Code (RNCC_2910)

5 Document Availability Code (DAC_2640)

The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

5 Reference Number Category Code (RNCC_2910)

9Z

Reference Number Action Activity Code (RNAAC_2900)

DLIS-K, Battle Creek, MI 49037-3084

4 Reference Number Format Code (RNFC_2920)

Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

6 Document Availability Code (DAC_2640)

The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 3110-00-474-9232 Submit RFQ

ISC	Originator	NIIN Status	Replaced / Replacement ISC	Replaced / Replacement Originator	Replacement NIIN Status	Replacement Date	Replaced / Replacement NSN	Decision Date
2	KZ	0						22 Sep 1974

Code Definitions

2 Item Standardization Code (ISC_2650)

An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.

KZ

Originator of Standardization Decision (ORG_STDZN_DEC_9325)

Defense Supply Center Philadelphia, Philadelphia, PA 19101

0 NIIN Status Code (NIIN_STAT_CD_2670)

Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

22 Sep 1974

Standardization Decision Date (DT_STDZN_DEC_2300)

FLIS - SEG G - FREIGHT DATA | NSN 3110-00-474-9232 Submit RFQ

Integrity	Originating	HMC	LCL	WCC	TCC	SHC	ADC	ACC	ASH	LTL	NMFC	NMFC Sub Item	UFC	Freight Description	Rail Variance
				72D	Z	9	A	V	Z	P	114820	X	58860	BEARINGS-BUSHINGS-NOI-BALL-ROLLER

Code Definitions

XX

Originating Activity Code (ORIG_ACTY_CD_4210)

72D

Water Commodity Code (WRT_CMDTY_CD_9275)

Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components

Z

Type Cargo Code (TYPE_CGO_CD_9260)

No special type of cargo code applicable

9 Special Handling Code (SP_HDLG_CD_9240)

No special handling required

A

Air Dimension Code (AIR_DIM_CD_9220)

Shipment is not a consolidation and does not exceed 72 inches in any dimension.

V

Air Commodity Code (AIR_CMTY_HDLG_9215)

Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.

Z

Air Special Handling Code (AIR_CMTY_HDLG_9215)

No special handling required.

P

Less Than Truckload (CLAS_RTNG_CD_2770)

77.5

114820

National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)

X

NMFC Sub Item Number (SUB_ITM_NBR_0861)

58860

Uniform Freight Classification (UFC_CD_MODF_3040)

BEARINGS-BUSHINGS-NOI-BALL-ROLLER

Freight Description (FRT_DESC_4020)

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)

No Variation. NMFC and UFCC Match.

FLIS - SEG H - MANAGEMENT DATA | NSN 3110-00-474-9232 Submit RFQ

MOE	SOS	AAC	CIIC	QUP	Reparability	UI
DA	B17	D	U	1	Z	EA
DA	B17	D	U	1		EA
DF	FLZ	D	U	1	N	EA
DN	B17	V	U	1		EA

Code Definitions

B17

Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)

US Army Aviation and Missile Command (Air), ATTN: AMSMI-LC-MM-C, Redstone Arsenal, AL 35898-5230

D

Acquisition Advice Code (AAC_2507)

DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.

U

Controlled Item Inventory Code (CIIC_2863)

Unclassified

1 Quantity Unit Pack (QUP_6106)

Z

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)

ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables

EA

Unit of Issue (UI_3050)

Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.

0 Shelf Life Code (SLC_2943)

TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.

FLZ

Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)

Warner Robins Air Logistics Center, 455 Byron St, Robins AFB, GA 31098-1860

N

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)

AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms

V

Acquisition Advice Code (AAC_2507)

TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.

DA

Service / Agency Code (MOE_CD_2833)

Department of the Army

DF

Service / Agency Code (MOE_CD_2833)

Department of the Air Force

DN

Service / Agency Code (MOE_CD_2833)

Department of the Navy

FLIS - SEG W - PACKAGING DATA | NSN 3110-00-474-9232 Submit RFQ

Source	PICA / SICA	Packaging Category	Storage	Preservation	Clean/Dry	INT Qty	Unit Weight	Unit Size	Unit Pack Cube	Item Weight	Item Dims
P	P		B	33	1	000	1.0 lbs	8in x 8in x 4in	0.148 cu ft	0.4 lbs	6in x 6in x 2in

Preservation Material	Wrapping Material	Cushioning / Dunnage	Cushioning Thickness	Unit Container	Intermediate Container	Unit Container Level	Special Marking	Level A Packing	Level B Packing	Minimal Packing	Optional Procedure
02	GB	NA	X	ED	00	B	00	C	F	U	O

Code Definitions

P

Packaging Data Source Code (PK_DTA_SRC_CD_5148)

Primary Inventory Control Activity (PICA)

P

Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)

Primary Inventory Control Activity (PICA)

B

Item Type Storage Code (ITM_TYP_STOR_5156)

Unheated General Purpose

33 Method of Preservation Code (MTHD_PRSRV_CD_5160)

Greaseproof-waterproof bag, Sealed

1 Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)

Any suitable process that is not injurious to the item.

000 Intermediate Container Quantity (INTMD_CTN_QTY_5152)

1.0 lbs

Unit Pack Weight (UP_WT_5153)

8in x 8in x 4in

Unit Pack Size (UP_SZ_5154)

0.148 cu ft

Unit Pack Cube (UP_CU_5155)

0.4 lbs

Unpackaged Item Weight (UNPKG_ITM_WT_5157)

6in x 6in x 2in

Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)

02 Preservation Material Code (PRSRV_MAT_CD_5162)

MIL-PRF-16173, Grade 2, corrosion preventive, solvent cutback, cold application, soft film

GB

Wrapping Material Code (WRAP_MAT_CD_5163)

MIL-PRF-121, greaseproof, waterproof barrier

NA

Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)

PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning

X

Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)

As required to protect the item or elements of the package

ED

Unit Container Code (UNIT_CTNR_CD_5166)

ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.

00 Intermediate Container Code (INTMD_CTNR_CD_5167)

No requirement.

B

Unit Container Level Code (UNIT_CTNR_LVL_5168)

Unit container provides level B packing protection.

00 Special Marking Code (SP_MKG_CD_5169)

No special marking

C

Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)

Packing shall be accomplished using cleated-plywood wood boxes conforming to ASTM-D6251, Type III, Class 2 or nailed wood boxes conforming to ASTM-D6880, Class 2, heavy duty, or covered wood crates conforming to ASTM-D6039, Type V, Style B, or lumber and plywood sheathed wood crates conforming to MIL-C-104, or load-bearing base skidded wood-cleated boxes conforming to ASTM-D6256, Type II (overseas), or steel or aluminum slotted angle crates conforming to MIL-C-9897, Type I, or open wood crates conforming to MIL-C-3774.

F

Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)

Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

U

Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.

O

Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)

Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.

FLIS - SEG M/V - CHARACTERISTICS DATA | NSN 3110-00-474-9232 Submit RFQ

MRC	Decoded Requirement	Clear Text Reply
ABXV	Bore Diameter	4.4992 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM
AGVT	Outer Ring Width	1.4950 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
MATT	Material	STEEL INNER RING
MATT	Material	STEEL OUTER RING
MATT	Material	STEEL RETAINER
AGVU	Inner Ring Width	1.6200 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM
MDCL	Material Document And Classification	204-011-112-1,97499 MFR REF SINGLE MATERIAL RESPONSE RETAINER
MDCL	Material Document And Classification	FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	Material Document And Classification	FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
ADGA	Overall Outside Diameter	5.3742 INCHES MINIMUM AND 5.3750 INCHES MAXIMUM
STYL	Style Designator	SOLID INNER AND OUTER RACES

Questions?

Want to know more about our Defense Services?

Contact Us. We are here to help.

Questions?

Have any questions regarding a Request For Quote?

Contact Us. We are here to help.

Questions?

Ask about our Supply Management Services.

Contact Us. We are here to help.

Search for a specific FSG, FSC, CAGE code or PS Issue

Tutorials

3110-00-474-9232

BEARING,ROLLER,JOURNAL

3110-00-474-9232 (3110004749232, 004749232)

Part Numbers (5 listings): 204-011-112-1 | 77JTG2486-9D1AND1R722677-9D | B5748B | 204-011-112-001 | 204-011-112-003 |

FSG 31 / FSC 3110

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 1 Jan 1963

Unit Weight: 1.0 lbs

Unit Size: 8in x 8in x 4in

Unit Pack Cube: 0.148 cu ft

MSDS: None

Hazmat: None

1 - Source of Control Reference

Reference Number Category Code (DRN_2910)

3 - Design Control Reference

Reference Number Category Code (DRN_2910)

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)

2 - Production Item

Reference Number Variation Code (DRN_4780)

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)

Federal Item Identification Guide (FIIG_4065)

Item Naming Code (INC_4080)

1 Jan 1963

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)

1

Type of Item Identification (TYP_II_4820)

A

Demilitarization Code (DEMIL_CD_0167)

N

Hazardous Material Indicator Code (HMIC_0865)

U

Precious Metals Indicator Code (PMIC_0802)

0

Acquisition Method Code (AMC_2871)

C

Acquisition Advice Code (AAC_2507)

2

Acquisition Method Code (AMC_2871)

Q

Acquisition Method Suffix Code (AMSC_2876)

J

Item Management Code (IMC_2744)

BN

Supplementary Receivers (SUPPLM_RCVR_2534)

3

Reference Number Format Code (RNFC_2920)

1

Reference Number Category Code (RNCC_2910)

2

Reference Number Variation Code (RNVC_4780)

1

Document Availability Code (DAC_2640)

CT

Reference Number Action Activity Code (RNAAC_2900)

D

Reference Number Status Code (RNSC_2923)

3

Reference Number Category Code (RNCC_2910)

5

Document Availability Code (DAC_2640)

5

Reference Number Category Code (RNCC_2910)

9Z

Reference Number Action Activity Code (RNAAC_2900)

4

Reference Number Format Code (RNFC_2920)

6

Document Availability Code (DAC_2640)

2

Item Standardization Code (ISC_2650)

KZ