- FSG 31 - Bearings
- FSC 3110 - Bearings, Antifriction, Unmounted
- NSN 3110-01-039-6244
3110-01-039-6244
BEARING,ROLLER,NEEDLE
3110-01-039-6244 (3110010396244, 010396244)
Part Numbers (3 listings): CCYRL-2-S | 122-6848504ITEM:40 | SG818-LU-MMA-010FIG7-15-19 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| CCYRL-2-S | 3 - Design Control Reference | 2 - Production Item | MCGILL MANUFACTURING COMPANY INC | 92563 |  |
| 122-6848504 ITEM: 40 | C - Advisory Reference | 1 - Incomplete Part Number | NAVAL SEA SYSTEMS COMMAND | 53711 |  |
| SG818-LU-MMA-010 FIG 7-15-19 | C - Advisory Reference | 1 - Incomplete Part Number | NAVAL SEA SYSTEMS COMMAND | 53711 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 3110 | 010396244 | A044A0 | 00051 | X | 4 | 3 | A | N | A | 25 Apr 1977 |
A044A0
Federal Item Identification Guide (FIIG_4065)
00051
Item Naming Code (INC_4080)
25 Apr 1977
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BG | N9GD | 3 | H | Z | GH | HD | 1 Feb 2005 | |||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
H
Acquisition Method Suffix Code (AMSC_2876)
The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 3 | 2 | 1 | KZ | D | CCYRL-2-S | 92563 | | ||||
| C | 1 | 5 | ZZ | AC | 122-6848504 ITEM: 40 | 53711 | | |||||
| C | 1 | 5 | ZZ | AC | SG818-LU-MMA-010 FIG 7-15-19 | 53711 | | |||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
AC
Service / Agency Designator Code (SADC_4672)
Navy
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | KZ | 0 | 18 Dec 1980 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
18 Dec 1980
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | 742 | Z | 9 | A | V | Z | P | 114820 | X | 58860 | BEARINGS-BUSHINGS-NOI-BALL-ROLLER |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
742
Water Commodity Code (WRT_CMDTY_CD_9275)
Bearings
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
114820
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58860
Uniform Freight Classification (UFC_CD_MODF_3040)
BEARINGS-BUSHINGS-NOI-BALL-ROLLER
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | XXX |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | ZZ | E | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGZA | Alignment Type | RIGID |
| AGYW | Bearing Seal Type | LIPS TURNED OUTWARDLY |
| ABXV | Bore Diameter | 0.6210 INCHES MINIMUM AND 0.6270 INCHES MAXIMUM |
| MATT | Material | STEEL NUT |
| MATT | Material | STEEL COMP E52100 INNER RING |
| MATT | Material | STEEL COMP E52100 OUTER RING |
| MATT | Material | STEEL COMP E52100 ROLLER |
| MATT | Material | WOOL SEAL |
| AGVT | Outer Ring Width | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AGVU | Inner Ring Width | 1.3025 INCHES MINIMUM AND 1.3175 INCHES MAXIMUM |
| LMDC | Lubrication Material Document And Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| ADZG | Lubrication Material | GREASE |
| MDCL | Material Document And Classification | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | Material Document And Classification | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | Material Document And Classification | 66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| AGYJ | Seal Quantity | 2 |
| ADGA | Overall Outside Diameter | 2.0000 INCHES NOMINAL |
| FEAT | Special Features | CROWNED OD |
| AGYE | Surface Finish | GROUND |
| SFTT | Surface Treatment | OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES |
Back to TopBack to Top
