- FSG 31 - Bearings
- FSC 3120 - Bearings, Plain, Unmounted
- NSN 3120-00-115-2952
3120-00-115-2952
BEARING,PLAIN,ROD END
3120-00-115-2952 (3120001152952, 001152952)
Part Numbers (3 listings): 123CM10080-501 | 123CM10080 | 123CM10080-5 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 123CM10080-501 | 3 - Design Control Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 |  |
| 123CM10080-501 | 5 - Replaced / Discontinued | 2 - Production Item | D F P MANUFACTURING CORP | 9J659 |  |
| 123CM10080 | 5 - Replaced / Discontinued | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
| 123CM10080-5 | 5 - Replaced / Discontinued | 9 - No Longer Used | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 3120 | 001152952 | A045A0 | 13209 | X | K | A | N | U | 23 Sep 1968 |
A045A0
Federal Item Identification Guide (FIIG_4065)
13209
Item Naming Code (INC_4080)
23 Sep 1968
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZF01 | 1 Apr 1996 | |||||||||||||||||||||||||||||
| N9BG | N9GD | 3 | C | Z | KE | GT | KE | 19 Nov 2013 | ||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | A | KZ | 123CM10080-501 | 26512 | | ||||||
| 5 | 2 | 5 | ZZ | 123CM10080-501 | 9J659 | | ||||||
| 5 | 2 | 5 | ZZ | 123CM10080 | 26512 | | ||||||
| 3 | 5 | 9 | 1 | KE | B | 123CM10080-5 | 26512 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
KE
Reference Number Action Activity Code (RNAAC_2900)
Naval ICP, Philadelphia, PA 19111
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | KZ | 0 | 27 Jun 1969 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
27 Jun 1969
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 742 | Z | 9 | A | V | Z | Q | 114850 | X | 58880 | BEARING-BUSHING-O-T-BALL-ROLLER-I-S |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
742
Water Commodity Code (WRT_CMDTY_CD_9275)
Bearings
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
114850
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58880
Uniform Freight Classification (UFC_CD_MODF_3040)
BEARING-BUSHING-O-T-BALL-ROLLER-I-S
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | XXX | 0.6 lbs | 0.052 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | E | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.6 lbs
Unit Pack Weight (UP_WT_5153)
0.052 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGGG | Bore Center To Shank End Distance | 7.2710 INCHES MINIMUM AND 7.2910 INCHES MAXIMUM |
| ABXV | Bore Diameter | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| CBBL | Features Provided | FLUSH LUBRICATION FITTING |
| MDCL | Material Document And Classification | MIL-S-6758,SAE 4130 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | Material Document And Classification | QQ-S-763,CL 410 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| MDCL | Material Document And Classification | QQ-S-763,CL 440C FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATT | Material | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATT | Material | STEEL COMP 440C INNER MEMBER |
| MATT | Material | STEEL COMP 410 RACE INSERT |
| MATT | Material | STEEL COMP 4130 ROD END BODY |
| AGGF | Outer Member Outside Diameter | 1.1140 INCHES MINIMUM AND 1.1340 INCHES MAXIMUM |
| AGGH | Outer Member Width | 0.3300 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM |
| AGGJ | Inner Member Width | 0.3790 INCHES MINIMUM AND 0.3840 INCHES MAXIMUM |
| AGHA | Inspection Hole Center To End Distance | 0.6250 INCHES NOMINAL |
| CTLM | Lubrication Feature | PERFORATION EXTERNAL OUTER MEMBER |
| AAZF | Shank Style | INTERNALLY THREADED W/INSPECTION HOLE |
| AGGY | Shank Thread Length | 1.2500 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM |
| ABHP | Overall Length | 7.8430 INCHES NOMINAL |
| STYL | Style Designator | BALL TYPE |
| SFTT | Surface Treatment | CADMIUM ROD END BODY |
| AAJD | Thread Class | 3B |
| AWDP | Thread Diameter | 0.438 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| CMLP | Thread Quantity Per Inch | 20 |
| THSD | Thread Series Designator | UNF |
Back to TopBack to Top
