Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MILD80002 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | |
3413-1321-2524 | 6 - Informative Reference | 9 - No Longer Used | DEFENSE SUPPLY CENTER RICHMOND | 99998 |
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34 | 3413 | 002406152 | T317-F | 03945 | X | 4 | 3 | A | N | A | 0 | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
A405 | A402 | 3 | C | 3 | D | DI | 1 Aug 1996 | |||||||||||||||||||||||
DCR3 | 3 | C | D | D | 1 Aug 1996 | |||||||||||||||||||||||||
NSCR | NSFF | 3 | C | 3 | E | DI | JN | 1 Aug 1996 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
End Item Primary Inventory Control Activity. This code identifies SICA managed end items or equipment assigned to another service PICA that is responsible for the wholesale logistics support functions of single submitter of cataloging data, acquisition and disposal authority and depot maintenance, if required, to be provided by DMISA. Supply support requirements will be submitted by the SICA to the PICA on MIPRs unless otherwise directed by the PICA. The SICA is responsible for the wholesale stock, store, and issue functions for SICA activities. The SICA CMD will reflect Source of Supply or SOS Modifiers compatible with the SICA managing activity. The PICA will not be entered in the DAAS IMM field.
Major End Items of Equipment: Items of such importance to the operations readiness of operating units that they are subject to continuing centralized individual item management and asset control throughout all command and support echelons.
DLA/DGSC Provides Depot Maintence Support.
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
Industrial Plant Equipment Repair Facility, Mechanicsburg, PA
Naval Facilities Expeditionary Logistics Center, Port Hueneme, CA 93043
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 1 | 3 | JS | D | MILD80002 | 81349 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Naval ICP, Mechanicsburg, PA 17055-0788
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
1 | CX | 0 | 3 | CX | 0 | 9 Aug 2000 | 3413005171061 | 9 Aug 2000 |
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FF | W | 72E | Z | 9 | A | B | Z | W | 131670 | Z | 61060 | TOOLS-PWR-O-T-PWR-HND-TOOLS | 1 |
Code FF denotes special factors or conditions in an item description which have an effect on the ratings or charges; therefore, the item description should be read carefully to ensure that such special factors or conditions can be included as a part of the bill of lading description.
Rating Variable
Engineer and Material Handling Equipment, Test/Tool sets and Equipment
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
DLA Aviation, Richmond, VA 23297
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Unclassified
1
COAST GUARD: Reparable item. Repair, condemnation, and disposal not authorized below depot (Inventory Control Point (ICP)) level; DLA: This item has been reviewed and a determination has been made that the item can be restored to a serviceable condition from an unserviceable condition at the depot level; NAVY: Resale-Brand Name Perishable Subsistence
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
US Army Armament and Chemical Acquisition and Logistics, Activity, ATTN: AMSTA-AC, Rock Island, IL 61299-6000
INVENTORY CONTROL POINT (ICP)-REGULATED (Service/Agency use only.) Issue, transfer, or shipment is controlled by the ICP. 1. The use or stockage of the item requires release authority based on prior or concurrent justification. 2. Requisitions will be submitted in accordance with Agency/Service requisitioning procedure.
ARMY: When repair is beyond lower level maintenance capability, evacuate the item to depot. Disposal is not authorized below wholesale level; MARINE CORPS: Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level; NAVY: Field Level Reparables
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Defense Logistics Agency
Department of the Army
Department of the Navy
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
A | S | A | 10 | 1 | 000 |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | FA | LK | 0 | FC | 00 | A | 24 | E | Q | O |
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
Secondary Inventory Control Activity (SICA)
Heated General Purpose – Heated 40 F and above
Physical protection
Any suitable process that is not injurious to the item.
No requirement
MIL-P-130, laminated and creped wrapping paper
Wood blocking and bracing, fasteners, or steel strapping, for tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing.
Not Applicable
ASTM-D6880, Class 2, heavy duty wood box.
No requirement.
Unit container provides level A packing protection.
Open for inspection or use only
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
BNSD | Distance From Spindle Center To Column | 12.000 INCHES MINIMUM |
BNRY | Drilling Capability | 2 IN. IN CAST IRON |
AKYD | Accessory Components And Quantity | CHUCK,JAW,0 TO 1/2 IN. W/KEY AND TAPER SHANK TO FIT NO. 5 MORSE TAPERSPINDLE,1; DRIFTS,DRILL,MORSE TAPERSHANK HIGH SPEED TWIST,NO. 2,3,4,5,1; DRILL SET 1/8 IN. TO 1/2 IN. BY 1/64 IN. INCREMENTS STRAIGHT SHANK,HIGH SPEED TWIST DRILLS,2 SETS; DRILLSET,1/2 IN. TO 1 IN. BY 1/16 IN. INCREMENTS,MORSE TAPER SHANK,HIGH SPEED TWIST DRILL,2; DRILL SET,1 IN.TO 2 IN. BY 1/8 IN. INCREMENTS,MORSE TAPER SHANK,HIGH SPEED TWIST DRILL,2SETS; SLEEVE,REDUCING NO. 5 TO NO.4 MORSE TAPER,1; SLEEVE,REDUCING NO.4 TO NO.3 MORSE TAPER,1; SLEEVE,REDUCING NO. 4 TO NO .2 MORSE TAPER,1; PUMP COLLANT,ELECTRIC DRIVEN COMPLETE,1 |
BNRW | Base Working Surface Length | 24.000 INCHES NOMINAL |
BNSG | Base Working Surface Shape | RECTANGULAR |
BNSF | Base Working Surface Type | SLOTTED W/COOLANT TROUGH |
BNSL | Base Working Surface Mounting Location | AT BASE |
BNRX | Base Working Surface Width | 20.000 INCHES MINIMUM |
BNRZ | Column Type | ROUND |
ACDC | Current Type | AC |
ZZZX | Departure From Cited Designator | PYJC,FEAT |
AKSQ | Fungus Resistant Treatment | INCLUDED |
AQDD | Feed Type | POWER |
FREQ | Frequency In Hertz | 60.000 |
AJGD | Head Type | SLIDING |
BPSX | Head Vertical Adjustment | 8.000 INCHES NOMINAL |
BNSM | Maximum Distance From Chuck/Spindle Nose To Base Working Surface | 45.000 INCHES |
BWJP | Maximum Distance From Chuck/Spindle Nose To Upper Working Surface | 23.000 INCHES |
ZZZT | Nondefinitive Spec/Std Data | 1 TYPE AND A STYLE AND 24 SIZE |
AAXX | Mounting Type | FLOOR |
BNQL | Main Drive Type | ELECTRIC MOTOR |
ALBH | Radio Interference Shielding | PROVIDED |
ALYE | Rotation Reversibility Feature | NOT INCLUDED |
FAAZ | Phase | THREE |
FEAT | Special Features | RIS SHALL BE IN ACCORDANCE WITH MIL-T-11748 |
BNSR | Upper Working Surface Diameter | 23.000 INCHES NOMINAL |
BNSW | Upper Working Surface Adjustment Feature | INCLUDED |
BNSP | Upper Working Surface Shape | ROUND |
BNSN | Upper Working Surface Type | SLOTTED |
BWJN | Upper Working Surface Mounting Location | COLUMN |
ELEC | Voltage In Volts | 208.000 |
BCRH | Spindle Quantity | 1 |
BNRK | Spindle Socket Taper Size | NO. 5,MORSE TAPER |
BTTB | Spindle Speed Range In Rpm | +100.000/+1100.000 |
BTSZ | Spindle Speed Quantity | 6 |
BNRL | Spindle Travel Distance | 5.000 INCHES NOMINAL |
BQLR | Spindle Type | TAPERED SOCKET |
BNSY | Swivel Adjustment In Deg | 180.000 |