Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE |
---|
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34 | 3439 | 002460556 | A283A0 | 07488 | X | 1 | A | P | U | 1 Jan 1963 |
Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | CX | 6 | 1 | CX | 0 | 2 Jan 1992 | 3439000888990 | 31 Dec 1991 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Item is inactive (no recorded Primary/Secondary Inventory Control Activity (PICA/SICA)). File data coded KFD is forwarded.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No Variation. NMFC and UFCC Match.
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
A | P | 10 | 1 | YYY |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | NA | X | E | Q | O |
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
As required to protect the item or elements of the package
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ZZZW | Departure From Cited Document | AS MODIFIED BY WELD POSITIONFOR WHICH DESIGNED |
CRPP | Filler Metal Chemical Composition In Percent | 0.70 IRON MAXIMUM FIFTH ELEMENT |
CRPP | Filler Metal Chemical Composition In Percent | 1.00 ZINC MAXIMUM THIRD ELEMENT |
CRPP | Filler Metal Chemical Composition In Percent | 1.25 MANGANESE MAXIMUM FOURTH ELEMENT |
CRPP | Filler Metal Chemical Composition In Percent | 1.20 TIN MAXIMUM SECOND ELEMENT |
CRPP | Filler Metal Chemical Composition In Percent | 33.00 NICKEL MAXIMUM FIRST ELEMENT |
ZZZT | Nondefinitive Spec/Std Data | MIL-RCUNI TYPE |
ABKV | Outside Diameter | 0.125 INCHES NOMINAL |
MATT | Material | COPPER ALLOY OVERALL |
ABRY | Length | 36.000 INCHES NOMINAL |
CSNF | Process Type For Which Designed | OXYACETYLENE OR GAS TUNGSTEN ARC |
SHPE | Shape | ROUND |
AGXW | Physical Form | STRAIGHT |
FEAT | Special Features | SIXTH ELEMENT TITANIUM,SEVENTH ELEMENT SILICON,EIGHTH ELEMENT,LEAD |
ARSC | Weld Position For Which Designed | ALL POSITIONS |