Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
ASME B94.19 TABLE 28 5/8 DIA CU | 3 - Design Control Reference | 2 - Production Item | AMERICAN SOCIETY OF MECHANICAL | 05047 | |
D-610 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | DOALL BALTIMORE COMPANY | 18056 | |
740 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | BRUBAKER TOOL CORP | 71201 | |
SG-20 | 5 - Replaced / Discontinued | 2 - Production Item | QUINCO TOOL PRODUCTS CO INC | 56370 | |
00725665450365 | 5 - Replaced / Discontinued | 2 - Production Item | QUINCO TOOL PRODUCTS CO INC | 56370 | |
S142 | 5 - Replaced / Discontinued | 2 - Production Item | UNION BUTTERFIELD CORP | 71485 | |
51-10314 | 5 - Replaced / Discontinued | 2 - Production Item | UNION BUTTERFIELD CORP | 71485 | |
15428 | 5 - Replaced / Discontinued | 2 - Production Item | BNS HOLDING INC. | 09058 | |
E20-3 | 5 - Replaced / Discontinued | 2 - Production Item | BRUBAKER TOOL CORP | 71201 | |
716-020516 | 5 - Replaced / Discontinued | 2 - Production Item | DOALL BALTIMORE COMPANY | 18056 | |
94190 | 5 - Replaced / Discontinued | 2 - Production Item | JCORPS | 26232 | |
685RH-5/8-5/8S | 5 - Replaced / Discontinued | 2 - Production Item | KENNAMETAL INC. | 1NEX4 | |
G-20 | 5 - Replaced / Discontinued | 2 - Production Item | POHL TOOL CO | 60332 | |
43661 | 5 - Replaced / Discontinued | 9 - No Longer Used | MORSE CUTTING TOOLS | 41672 | |
31133 | 5 - Replaced / Discontinued | 9 - No Longer Used | COLT INDUSTRIES OPERATING CORP | 48521 | |
41623 | 5 - Replaced / Discontinued | 9 - No Longer Used | KENNAMETAL INC. | 1NEX4 | |
C41623 | 5 - Replaced / Discontinued | 9 - No Longer Used | KENNAMETAL INC. | 1NEX4 | |
5303-0625 | 5 - Replaced / Discontinued | 9 - No Longer Used | KENNAMETAL INC. | 1NEX4 | |
SG-20 | 5 - Replaced / Discontinued | 9 - No Longer Used | DOALL BALTIMORE COMPANY | 18056 | |
55522 | 5 - Replaced / Discontinued | 9 - No Longer Used | STANDARD TOOL CO | 78197 | |
GGG-C-755 | 5 - Replaced / Discontinued | 9 - No Longer Used | FEDERAL SPECIFICATIONS | 81348 | |
41623 | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
5303-0625 | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
685RH-5/8-5/8S | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
204C20-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | BNS HOLDING INC. | 09058 | |
55522 | 5 - Replaced / Discontinued | 9 - No Longer Used | LEAR SIEGLER INC | 42970 | |
B20-4 | 5 - Replaced / Discontinued | 9 - No Longer Used | WELDON TOOL CO THE | 64560 | |
B94.19 TABLE 44 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMERICAN NATIONAL STANDARDS | 80204 | |
B40 | 5 - Replaced / Discontinued | 9 - No Longer Used | TRW CUTTING TOOL | 49352 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34 | 3455 | 002285231 | T171-A | 05077 | X | 1 | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Sep 2009 | |||||||||||||||||||||||||||||
ZF01 | 1 May 2015 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 4 | ZZ | ASME B94.19 TABLE 28 5/8 DIA CU | 05047 | |||||||
5 | 1 | F | CX | D-610 | 18056 | |||||||
5 | 1 | F | CX | 740 | 71201 | |||||||
5 | 2 | F | CX | E20-3 | 71201 | |||||||
5 | 2 | F | CX | 51-10314 | 71485 | |||||||
5 | 2 | F | CX | S142 | 71485 | |||||||
5 | 2 | 5 | ZZ | 685RH-5/8-5/8S | 1NEX4 | |||||||
4 | 5 | 2 | 4 | CX | D | 716-020516 | 18056 | |||||
4 | 5 | 2 | 4 | CX | D | 15428 | 09058 | |||||
4 | 5 | 2 | 4 | CX | D | 94190 | 26232 | |||||
5 | 2 | U | ZZ | 00725665450365 | 56370 | |||||||
5 | 2 | F | CX | SG-20 | 56370 | |||||||
5 | 2 | F | CX | G-20 | 60332 | |||||||
4 | 5 | 9 | 4 | CX | D | B20-4 | 64560 | |||||
4 | 5 | 9 | 4 | CX | B | 43661 | 41672 | |||||
4 | 5 | 9 | 4 | CX | B | 55522 | 42970 | |||||
4 | 5 | 9 | 4 | CX | B | 31133 | 48521 | |||||
4 | 5 | 9 | 4 | CX | B | 5 | B40 | 49352 | ||||
4 | 5 | 9 | 4 | CX | B | 204C20-1 | 09058 | |||||
5 | 9 | 4 | CX | 41623 | 13130 | |||||||
4 | 5 | 9 | 4 | CX | D | 5303-0625 | 13130 | |||||
5 | 9 | 4 | CX | 685RH-5/8-5/8S | 13130 | |||||||
4 | 5 | 9 | 4 | CX | B | SG-20 | 18056 | |||||
5 | 9 | 5 | ZZ | B | 41623 | 1NEX4 | ||||||
5 | 9 | 5 | ZZ | B | 5303-0625 | 1NEX4 | ||||||
5 | 9 | 5 | ZZ | B | C41623 | 1NEX4 | ||||||
5 | 9 | F | CX | B | 55522 | 78197 | ||||||
5 | 9 | F | CX | B | B94.19 TABLE 44 | 80204 | ||||||
1 | 5 | 9 | 4 | CX | B | GGG-C-755 | 81348 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
USA
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by engineering data other than an engineering drawing. The data is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on Limited Rights information will not be released to the general public through publications or other media.
Defense Supply Center Richmond, Richmond, VA 23297-5000
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
A reference number represented by a bar code structure in accordance with an organization such as Global Standards 1 (GS1). The technical documentation may or may not be available to the RNAAC. Note: GS1 is the organization formed as a result of the merger between the Uniform Code Council (UCC) and EAN International.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Match of reference number(s) by an associated code is not valid for this reference.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | CX | 1 | 1 | CX | 0 | 8 Dec 1975 | 3455002285297 | 15 Jan 1988 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
732 | Z | 9 | A | V | Z | P | 186630 | X | 91810 | TOOLS-NOI-O-T-PLSTC-IN-BBLS-BXS |
Tools, Hand and Portable, Electric
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
DLA Aviation, Richmond, VA 23297 ** No longer valid for input **
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Department of the Navy
Department of the Army
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | 1 | YYY |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
02 | E | Q | U |
Primary Inventory Control Activity (PICA)
Any suitable process that is not injurious to the item.
MIL-PRF-16173, Grade 2, corrosion preventive, solvent cutback, cold application, soft film
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.