3455-00-228-5298

CUTTER,MILLING,END

3455-00-228-5298 (3455002285298, 002285298)
Part Numbers (29 listings): B94.19TABLE41,3/4CUT | 94193 | S-203 | ASMEB94.19 | D-610 | 00725665450471 | E24-2 | SG-24X | 51-10313 | 716-020714 | 20242 | 1721-0750 | 41628 | C5302-0750 | 5302-0750 | 685RH-3/4-1/2S | G-24X | 15431 | 204C24 | 55521 | B24-3 | 43664 | 31132 | 740 | GGG-C-755 | B94.19TABLE443/4CUT | B39 | 2612 | 898350 |
Summary

FSG 34 / FSC 3455

DEMIL: A

DEMIL INT:

HMIC: N

Date Created: 1 Jan 1963

Unit Weight: 0.3 lbs

Unit Size: None

Unit Pack Cube: 0.001 cu ft

Replacement NSN:

  3455-00-996-9577

Replacement Date: 30 May 1975

MSDS: None

Hazmat: None

Request a Quote


;


MASTER CROSS REFERENCE LIST (MCRL) | NSN 3455-00-228-5298 Submit RFQ
Manufacturer Part NumberRNCCRNVCManufacturer NameCAGE
B94.19 TABLE 41, 3/4 CUT3 - Design Control Reference2 - Production ItemAMERICAN SOCIETY OF MECHANICAL  05047    CAGE 05047  
941933 - Design Control Reference2 - Production ItemJCORPS  26232      
S-2035 - Replaced / Discontinued1 - Incomplete Part NumberNIAGARA CUTTER INC  33689      
ASME B94.195 - Replaced / Discontinued1 - Incomplete Part NumberAMERICAN SOCIETY OF MECHANICAL  05047    CAGE 05047  
D-6105 - Replaced / Discontinued1 - Incomplete Part NumberDOALL BALTIMORE COMPANY  18056    CAGE 18056  
007256654504715 - Replaced / Discontinued1 - Incomplete Part NumberQUINCO TOOL PRODUCTS CO INC  56370      
E24-25 - Replaced / Discontinued2 - Production ItemBRUBAKER TOOL CORP  71201      
SG-24X5 - Replaced / Discontinued2 - Production ItemQUINCO TOOL PRODUCTS CO INC  56370      
51-103135 - Replaced / Discontinued2 - Production ItemUNION BUTTERFIELD CORP  71485    CAGE 71485  
716-0207145 - Replaced / Discontinued2 - Production ItemDOALL BALTIMORE COMPANY  18056    CAGE 18056  
202425 - Replaced / Discontinued2 - Production ItemNIAGARA CUTTER INC  33689      
1721-07505 - Replaced / Discontinued2 - Production ItemNEW YORK TWIST DRILL INC  03882    CAGE 03882  
416285 - Replaced / Discontinued2 - Production ItemKENNAMETAL INC.  1NEX4    CAGE 1NEX4  
C5302-07505 - Replaced / Discontinued2 - Production ItemKENNAMETAL INC.  1NEX4    CAGE 1NEX4  
5302-07505 - Replaced / Discontinued2 - Production ItemKENNAMETAL INC.  1NEX4    CAGE 1NEX4  
685RH-3/4-1/2S5 - Replaced / Discontinued2 - Production ItemKENNAMETAL INC.  1NEX4    CAGE 1NEX4  
G-24X5 - Replaced / Discontinued2 - Production ItemPOHL TOOL CO  60332      
154315 - Replaced / Discontinued2 - Production ItemBNS HOLDING INC.  09058    CAGE 09058  
204C245 - Replaced / Discontinued9 - No Longer UsedBNS HOLDING INC.  09058    CAGE 09058  
555215 - Replaced / Discontinued9 - No Longer UsedLEAR SIEGLER INC  42970      
B24-35 - Replaced / Discontinued9 - No Longer UsedWELDON TOOL CO THE  64560      
436645 - Replaced / Discontinued9 - No Longer UsedMORSE CUTTING TOOLS  41672    CAGE 41672  
311325 - Replaced / Discontinued9 - No Longer UsedCOLT INDUSTRIES OPERATING CORP  48521      
E24-25 - Replaced / Discontinued9 - No Longer UsedALVORD-POLK INC.  01713      
7405 - Replaced / Discontinued9 - No Longer UsedALVORD-POLK INC.  01713      
555215 - Replaced / Discontinued9 - No Longer UsedSTANDARD TOOL CO  78197      
GGG-C-7555 - Replaced / Discontinued9 - No Longer UsedFEDERAL SPECIFICATIONS  81348    CAGE 81348  
685RH-3/4-1/2S5 - Replaced / Discontinued9 - No Longer UsedCLEVELAND TWIST DRILL CO  13130    CAGE 13130  
5302-07505 - Replaced / Discontinued9 - No Longer UsedCLEVELAND TWIST DRILL CO  13130    CAGE 13130  
416285 - Replaced / Discontinued9 - No Longer UsedCLEVELAND TWIST DRILL CO  13130    CAGE 13130  
B94.19 TABLE 44 3/4 CUT5 - Replaced / Discontinued9 - No Longer UsedAMERICAN NATIONAL STANDARDS  80204    CAGE 80204  
B395 - Replaced / Discontinued9 - No Longer UsedTRW CUTTING TOOL  49352      
26125 - Replaced / Discontinued9 - No Longer UsedILLINOIS TOOL WORKS INC  19863      
8983505 - Replaced / Discontinued9 - No Longer UsedENCO MFG CO  20528      
Code Definitions

3 - Design Control Reference

Reference Number Category Code (DRN_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

2 - Production Item

Reference Number Variation Code (DRN_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

1 - Incomplete Part Number

Reference Number Variation Code (DRN_4780)


A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.

9 - No Longer Used

Reference Number Variation Code (DRN_4780)


A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.


FLIS - SEG A - IDENTIFICATION | NSN 3455-00-228-5298 Submit RFQ
FSGFSCNIINFIIGINCCRITICALITYTYPE OF ITEMMRCDEMILHMICEDCPMICADPECDATE CREATED
343455002285298T171-A05077X1ANA1 Jan 1963
Code Definitions

34

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)


Metalworking Machinery

3455

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)


Cutting Tools for Machine Tools

002285298

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)


NSN 3455-00-228-5298

T171-A

Federal Item Identification Guide (FIIG_4065)

05077

Item Naming Code (INC_4080)

1 Jan 1963

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)


The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

1

Type of Item Identification (TYP_II_4820)


Full Descriptive Item Identification

A

Demilitarization Code (DEMIL_CD_0167)


Non-MLI/ Non-SLI — Demilitarization not required.

N

Hazardous Material Indicator Code (HMIC_0865)


Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

A

Precious Metals Indicator Code (PMIC_0802)


Item does not contain Precious Metal.


Similar & Related NSN Parts

FLIS - SEG B - MOE RULE DATA | NSN 3455-00-228-5298 Submit RFQ
MOE RuleFormer MOEAMCAMSCNIMSCIMCIMC ActivityAACDSORCollaboratorsReceiversEffective Date
G86000C1 Apr 1991
G88000C1 Apr 1991
YB011 Apr 1991
ZH011 Apr 1991
ZW011 Nov 1998
A921A1821GZBF1 Jul 2006
FGGGFGCX1GZTG1 Jul 2006
MC41MC041GZPA1 Jul 2006
N9BGN9GD1GZHDGTHD1 Jul 2006
Code Definitions

0

Acquisition Method Code (AMC_2871)


Not Established

C

Acquisition Advice Code (AAC_2507)


SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.

1

Acquisition Method Code (AMC_2871)


Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.

G

Acquisition Method Suffix Code (AMSC_2876)


The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

Z

Item Management Code (IMC_2744)


Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.

BF

Item Management Coding Activity (IMC_ACTY_2748)


U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000

TG

Item Management Coding Activity (IMC_ACTY_2748)


Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609

PA

Item Management Coding Activity (IMC_ACTY_2748)


Marine Corps Logistics Base, Albany, GA 31704-1128

HD

Item Management Coding Activity (IMC_ACTY_2748)


Naval Inventory Control Point, Mechanicsburg, PA 17055-0788

HD Collaborators

Supplementary Collaborators (SUPPLM_COLLBR_2533)


Naval Inventory Control Point, Mechanicsburg, PA 17055-0788


FLIS - SEG C - REFERENCE NUMBER | NSN 3455-00-228-5298 Submit RFQ
RNFCRNCCRNVCDACRNAACRNSCRNJCSADCMSDSHCCReference NumberCAGE
324ZZB94.19 TABLE 41, 3/4 CUT  05047   CAGE/05047
4324CXD94193  26232  
51FCXD-610  18056   CAGE/18056
51EZZASME B94.19  05047   CAGE/05047
51FCXS-203  33689  
51UZZ00725665450471  56370  
52FCXSG-24X  56370  
52FCXG-24X  60332  
52FCXE24-2  71201  
52FCX51-10313  71485   CAGE/71485
4524CXD716-020714  18056   CAGE/18056
52FCX1721-0750  03882   CAGE/03882
4524CXD15431  09058   CAGE/09058
52FCX20242  33689  
525ZZ41628  1NEX4   CAGE/1NEX4
525ZZ5302-0750  1NEX4   CAGE/1NEX4
525ZZ685RH-3/4-1/2S  1NEX4   CAGE/1NEX4
525ZZC5302-0750  1NEX4   CAGE/1NEX4
59FCXB898350  20528  
59FCX2612  19863  
4594CXB204C24  09058   CAGE/09058
594CX41628  13130   CAGE/13130
4594CXD5302-0750  13130   CAGE/13130
594CX685RH-3/4-1/2S  13130   CAGE/13130
59FCXB740  01713  
59FCXBE24-2  01713  
4594CXD55521  78197  
594CXB94.19 TABLE 44 3/4 CUT  80204   CAGE/80204
1594CXBGGG-C-755  81348   CAGE/81348
4594CXDB24-3  64560  
4594CXB43664  41672   CAGE/41672
4594CXB55521  42970  
4594CXB31132  48521  
4594CXBB39  49352  
Code Definitions

3

Reference Number Category Code (RNCC_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

2

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

4

Document Availability Code (DAC_2640)


The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.

ZZ

Reference Number Action Activity Code (RNAAC_2900)


USA

4

Reference Number Format Code (RNFC_2920)


Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

CX

Reference Number Action Activity Code (RNAAC_2900)


Defense Supply Center Richmond, Richmond, VA 23297-5000

D

Reference Number Status Code (RNSC_2923)


Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

5

Reference Number Category Code (RNCC_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

1

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.

F

Document Availability Code (DAC_2640)


The reference number is represented by engineering data other than an engineering drawing. The data is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on Limited Rights information will not be released to the general public through publications or other media.

E

Document Availability Code (DAC_2640)


The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.

U

Document Availability Code (DAC_2640)


A reference number represented by a bar code structure in accordance with an organization such as Global Standards 1 (GS1). The technical documentation may or may not be available to the RNAAC. Note: GS1 is the organization formed as a result of the merger between the Uniform Code Council (UCC) and EAN International.

5

Document Availability Code (DAC_2640)


The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

9

Reference Number Variation Code (RNVC_4780)


A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.

B

Reference Number Status Code (RNSC_2923)


Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.

1

Reference Number Format Code (RNFC_2920)


Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .


FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 3455-00-228-5298 Submit RFQ
ISCOriginatorNIIN StatusReplaced / Replacement ISCReplaced / Replacement OriginatorReplacement NIIN StatusReplacement DateReplaced / Replacement NSNDecision Date
1CX03CX130 May 1975 3455009969577 8 Dec 1975
Code Definitions

1

Item Standardization Code (ISC_2650)


An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.

CX

Originator of Standardization Decision (ORG_STDZN_DEC_9325)


Defense Supply Center Richmond, Richmond, VA 23297-5000

0

NIIN Status Code (NIIN_STAT_CD_2670)


Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

3

Replaced / Replacement Item Standardization Code (ISC_2650)


An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.

1

Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)


Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.

30 May 1975

Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)

3455-00-996-9577

Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)

8 Dec 1975

Standardization Decision Date (DT_STDZN_DEC_2300)


FLIS - SEG G - FREIGHT DATA | NSN 3455-00-228-5298 Submit RFQ
IntegrityOriginatingHMCLCLWCCTCCSHCADCACCASHLTLNMFCNMFC Sub ItemUFCFreight DescriptionRail Variance
732Z9AVZP186630X91810TOOLS-NOI-O-T-PLSTC-IN-BBLS-BXS
Code Definitions

XX

Originating Activity Code (ORIG_ACTY_CD_4210)


732

Water Commodity Code (WRT_CMDTY_CD_9275)


Tools, Hand and Portable, Electric

Z

Type Cargo Code (TYPE_CGO_CD_9260)


No special type of cargo code applicable

9

Special Handling Code (SP_HDLG_CD_9240)


No special handling required

A

Air Dimension Code (AIR_DIM_CD_9220)


Shipment is not a consolidation and does not exceed 72 inches in any dimension.

V

Air Commodity Code (AIR_CMTY_HDLG_9215)


Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.

Z

Air Special Handling Code (AIR_CMTY_HDLG_9215)


No special handling required.

P

Less Than Truckload (CLAS_RTNG_CD_2770)


77.5

186630

National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)

X

NMFC Sub Item Number (SUB_ITM_NBR_0861)

91810

Uniform Freight Classification (UFC_CD_MODF_3040)

TOOLS-NOI-O-T-PLSTC-IN-BBLS-BXS

Freight Description (FRT_DESC_4020)

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)


No Variation. NMFC and UFCC Match.


FLIS - SEG H - MANAGEMENT DATA | NSN 3455-00-228-5298 Submit RFQ
Unit PriceMOESOSAACCIICQUPReparabilityUISLC
DASMSDU1ZEA0
DFSMSDU1NEA0
DMSMSDU1ZEA0
DNSMSDU1EA0
DSSMSDU1NEA0
Code Definitions

SMS

Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)


Defense Logistics Agency, Enterprise Business Systems

D

Acquisition Advice Code (AAC_2507)


DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.

U

Controlled Item Inventory Code (CIIC_2863)


Unclassified

1

Quantity Unit Pack (QUP_6106)


1

Z

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)


ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables

EA

Unit of Issue (UI_3050)


Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.

0

Shelf Life Code (SLC_2943)


TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.

N

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)


AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms

DA

Service / Agency Code (MOE_CD_2833)


Department of the Army

DF

Service / Agency Code (MOE_CD_2833)


Department of the Air Force

DM

Service / Agency Code (MOE_CD_2833)


U.S. Marine Corps

DN

Service / Agency Code (MOE_CD_2833)


Department of the Navy

DS

Service / Agency Code (MOE_CD_2833)


Defense Logistics Agency


FLIS - SEG W - PACKAGING DATA | NSN 3455-00-228-5298 Submit RFQ
SourcePICA / SICAPackaging CategoryStoragePreservationClean/DryINT QtyUnit WeightUnit SizeUnit Pack CubeItem WeightItem Dims
PP30XXX0.3 lbs0.001 cu ft
Preservation MaterialWrapping MaterialCushioning / DunnageCushioning ThicknessUnit ContainerIntermediate ContainerUnit Container LevelSpecial MarkingLevel A PackingLevel B PackingMinimal PackingOptional Procedure
XD3ED00EQM
Code Definitions

P

Packaging Data Source Code (PK_DTA_SRC_CD_5148)


Primary Inventory Control Activity (PICA)

P

Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)


Primary Inventory Control Activity (PICA)

30

Method of Preservation Code (MTHD_PRSRV_CD_5160)


Waterproof protection

XXX

Intermediate Container Quantity (INTMD_CTN_QTY_5152)

0.3 lbs

Unit Pack Weight (UP_WT_5153)

0.001 cu ft

Unit Pack Cube (UP_CU_5155)

X

Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)


As required to protect the item or elements of the package

D3

Unit Container Code (UNIT_CTNR_CD_5166)


PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.

ED

Intermediate Container Code (INTMD_CTNR_CD_5167)


ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.

00

Special Marking Code (SP_MKG_CD_5169)


No special marking

E

Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)


Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.

Q

Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)


Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

M

Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)


All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.


Questions?


Want to know more about our Defense Services?


Contact Us. We are here to help.


Questions?


Have any questions regarding a Request For Quote?


Contact Us. We are here to help.


Questions?


Ask about our Supply Management Services.


Contact Us. We are here to help.


Back to Top
Back to Top