Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
ASME B94.2 | 3 - Design Control Reference | 1 - Incomplete Part Number | AMERICAN SOCIETY OF MECHANICAL | 05047 | |
712-001767 | 3 - Design Control Reference | 2 - Production Item | DOALL BALTIMORE COMPANY | 18056 | |
50-10698 4533-5/8 | 3 - Design Control Reference | 2 - Production Item | UNION BUTTERFIELD CORP | 71485 | |
19647 | 3 - Design Control Reference | 2 - Production Item | BNS HOLDING INC. | 09058 | |
5011-0625 | 3 - Design Control Reference | 2 - Production Item | NEW YORK TWIST DRILL INC | 03882 | |
200R-625 | 5 - Replaced / Discontinued | 2 - Production Item | BNS HOLDING INC. | 09058 | |
60040 | 5 - Replaced / Discontinued | 2 - Production Item | JCORPS | 26232 | |
4000-0625 | 5 - Replaced / Discontinued | 2 - Production Item | KENNAMETAL INC. | 1NEX4 | |
4001/630-5/8 | 5 - Replaced / Discontinued | 2 - Production Item | KENNAMETAL INC. | 1NEX4 | |
26351 | 5 - Replaced / Discontinued | 2 - Production Item | KENNAMETAL INC. | 1NEX4 | |
4533-5/8 | 5 - Replaced / Discontinued | 2 - Production Item | UNION BUTTERFIELD CORP | 71485 | |
50-10698 | 5 - Replaced / Discontinued | 2 - Production Item | UNION BUTTERFIELD CORP | 71485 | |
533.6250 | 5 - Replaced / Discontinued | 9 - No Longer Used | LAVALLEE & IDE INC | 02305 | |
533-6250 | 5 - Replaced / Discontinued | 9 - No Longer Used | LAVALLEE & IDE INC | 02305 | |
30640 | 5 - Replaced / Discontinued | 9 - No Longer Used | STANDARD TOOL CO | 78197 | |
GGG-R-180 | 5 - Replaced / Discontinued | 9 - No Longer Used | FEDERAL SPECIFICATIONS | 81348 | |
4000-0625 | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
4001/630-5/8 | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
26351 | 5 - Replaced / Discontinued | 9 - No Longer Used | CLEVELAND TWIST DRILL CO | 13130 | |
30640 | 5 - Replaced / Discontinued | 9 - No Longer Used | LEAR SIEGLER INC | 42970 | |
B94.2-1971 TABLE 13 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMERICAN NATIONAL STANDARDS | 80204 | |
259-429A | 5 - Replaced / Discontinued | 9 - No Longer Used | COLT INDUSTRIES OPERATING CORP | 48521 | |
20040 | 5 - Replaced / Discontinued | 9 - No Longer Used | COLT INDUSTRIES OPERATING CORP | 48521 | |
ANSI-B94.2 | 5 - Replaced / Discontinued | 9 - No Longer Used | FEDERAL COMMERCIAL ITEM DESCRIPTION | 58536 | |
1655-017-5/8 | 5 - Replaced / Discontinued | 9 - No Longer Used | MORSE CUTTING TOOLS | 41672 | |
22234 | 5 - Replaced / Discontinued | 9 - No Longer Used | MORSE CUTTING TOOLS | 41672 | |
23004183 | E - Replace Reference Number | 8 - Replacement NSN | ALLISON TRANSMISSION, INC. | 73342 | |
23004183 | E - Replace Reference Number | 8 - Replacement NSN | ROLLS-ROYCE CORPORATION | 63005 | |
26352 | E - Replace Reference Number | 8 - Replacement NSN | KENNAMETAL INC. | 1NEX4 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Replaced Reference Number. A manufacturerÆs part number, government specification/standard or other design control reference number that is superseded, discontinued or replaced resulting from a cancel-use action on a NSN which was recorded with ISC 3 or E. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34 | 3455 | 002362377 | T171-E | 05238 | X | 1 | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G860 | 0 | 0 | C | 1 Apr 1991 | ||||||||||||||||||||||||||
ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Nov 1993 | |||||||||||||||||||||||||||||
ZH01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
FGGG | FGCX | 1 | G | Z | TG | 1 Sep 2006 | ||||||||||||||||||||||||
N9BG | N9GD | 1 | G | Z | GH | GT | 1 Sep 2006 | |||||||||||||||||||||||
YJ01 | 1 Sep 2009 |
Not Established
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 1 | 5 | ZZ | ASME B94.2 | 05047 | |||||||
4 | 3 | 2 | 4 | CX | D | 19647 | 09058 | |||||
4 | 3 | 2 | 4 | CX | D | 712-001767 | 18056 | |||||
4 | 3 | 2 | 4 | CX | D | 50-10698 4533-5/8 | 71485 | |||||
4 | 3 | 2 | 4 | CX | D | 5011-0625 | 03882 | |||||
4 | 5 | 2 | 4 | CX | D | 4533-5/8 | 71485 | |||||
4 | 5 | 2 | 4 | CX | D | 50-10698 | 71485 | |||||
5 | 2 | 5 | ZZ | 26351 | 1NEX4 | |||||||
4 | 5 | 2 | 4 | CX | D | 200R-625 | 09058 | |||||
5 | 2 | 5 | ZZ | 4000-0625 | 1NEX4 | |||||||
5 | 2 | 5 | ZZ | 4001/630-5/8 | 1NEX4 | |||||||
4 | 5 | 2 | 4 | CX | D | 60040 | 26232 | |||||
4 | 5 | 9 | 4 | CX | B | 1655-017-5/8 | 41672 | |||||
4 | 5 | 9 | 4 | CX | B | 22234 | 41672 | |||||
4 | 5 | 9 | 4 | CX | B | 30640 | 42970 | |||||
4 | 5 | 9 | 4 | CX | B | 20040 | 48521 | |||||
4 | 5 | 9 | 4 | CX | B | 259-429A | 48521 | |||||
5 | 9 | 4 | ZZ | ANSI-B94.2 | 58536 | |||||||
5 | 9 | 4 | CX | 26351 | 13130 | |||||||
1 | 5 | 9 | 4 | CX | D | 4000-0625 | 13130 | |||||
5 | 9 | 4 | CX | 4001/630-5/8 | 13130 | |||||||
4 | 5 | 9 | 4 | CX | B | 533-6250 | 02305 | |||||
5 | 9 | 5 | ZZ | B | 533.6250 | 02305 | ||||||
4 | 5 | 9 | 4 | CX | D | 30640 | 78197 | |||||
1 | 5 | 9 | 4 | CX | D | B94.2-1971 TABLE 13 | 80204 | |||||
1 | 5 | 9 | 4 | CX | B | GGG-R-180 | 81348 | |||||
E | 8 | 3 | ZZ | 23004183 | 73342 | |||||||
E | 8 | 5 | ZZ | 26352 | 1NEX4 | |||||||
E | 8 | 3 | ZZ | 23004183 | 63005 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Replaced Reference Number. A manufacturerÆs part number, government specification/standard or other design control reference number that is superseded, discontinued or replaced resulting from a cancel-use action on a NSN which was recorded with ISC 3 or E. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
A non-item-identifying reference number that is added to a replacement NSN as a result of a cancel-use action on a NSN recorded with ISC 3 or E. It is used to indentify the original item of supply/replaced item. This reference number is automatically moved and this code is automatically assigned, do not submit for cataloging purposes.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
1 | CX | 0 | 3 | CX | 1 | 22 Jun 1985 | 3455002324103 | 23 Jun 1985 |
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Defense Supply Center Richmond, Richmond, VA 23297-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
732 | Z | 9 | A | B | Z | P | 186630 | X | 91810 | TOOLS-NOI-O-T-PLSTC-IN-BBLS-BXS |
Tools, Hand and Portable, Electric
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 31 | 1 | AAA | 0.7 lbs | 0.021 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | NA | X | E9 | ED | 05 | E | Q | M |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Waterproof bag, sealed
Any suitable process that is not injurious to the item.
No requirement
No requirement
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
As required to protect the item or elements of the package
ASTM-D5118, Class weather resistant fiberboard box; or PPP-B-566, water resistant folding box; or PPP-B-676, water resistant setup box.
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
Delicate instrument
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AQWK | Cutting Edge Tip Material | STEEL, HIGH SPEED |
ABMZ | Diameter | 0.625 INCHES NOMINAL |
AQWJ | Flute Cut Direction | RIGHT-HAND |
AQWG | Flute Design | STRAIGHT |
ALAA | Flute Length | 2.250 INCHES NOMINAL |
AQWH | Flute Type | INTEGRAL |
ALAR | Flute Quantity | 8 |
AQWM | Guide | NOT INCLUDED |
MATT | Material | STEEL |
AQTJ | Reamer Type | FLUTED CHUCKING |
AAZE | Shank Diameter | 0.563 INCHES NOMINAL |
AQPP | Shank Type | STRAIGHT |
ABHP | Overall Length | 9.000 INCHES NOMINAL |
ZZZK | Specification/Standard Data | 80204-B94.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |