3456-00-640-3670
ROLL SET,ROLLER TUBE EXPANDER
3456-00-640-3670 (3456006403670, 006403670)
Part Numbers (13 listings): ENAVYEXPANDERLR6SR6FR1 | 66006 | 1385500PCLR6/2/SR6/1/FR1/1/ | MIL-E-17624 | F1385500PCSR6FR1LR6 | 1385500PCLR6SR6FR1 | 955-596-9LN49T51 | D168-078-E6SPARE | E-168-163ITEM102SPARE | E-168-670ITEM102SPARE | E164-863-102SPAREROLL | E168-130ITEM102SPAREROLL | LR6SR6FR1 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| E NAVY EXPANDER LR6 SR6 FR1 | 3 - Design Control Reference | 1 - Incomplete Part Number | ELLIOTT TOOL TECHNOLOGIES LTD. | 79585 |  |
| 66006 | 3 - Design Control Reference | 2 - Production Item | THOMAS C. WILSON INC. | 66042 |  |
| 1385500 PC LR6/2/ SR6/1/ FR1/1/ | 3 - Design Control Reference | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 |  |
| MIL-E-17624 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 |  |
| F1385500PCSR6FR1LR6 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 | |
| 1385500 PC LR6 SR6 FR1 | 5 - Replaced / Discontinued | 2 - Production Item | NAVAL SHIP SYSTEMS COMMAND | 80064 | |
| 955-596-9LN49T51 | 5 - Replaced / Discontinued | 2 - Production Item | FOSTER WHEELER NORTH AMERICA CORP. | 23230 |  |
| D168-078-E6SPARE | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 |  |
| E-168-163ITEM102SPARE | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 | |
| E-168-670ITEM102SPARE | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 | |
| E164-863-102SPARE ROLL | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 | |
| E168-130 ITEM 102 SPARE ROLL | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 | |
| LR6SR6FR1 | 5 - Replaced / Discontinued | 2 - Production Item | ALSTOM POWER INC. | 11440 | |
| LR6SR6FR1 | 5 - Replaced / Discontinued | 2 - Production Item | THOMAS C. WILSON INC. | 66042 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 34 | 3456 | 006403670 | T337-C | 20967 | X | 4 | 9 | A | N | U | 1 Jan 1963 |
3456
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Cutting and Forming Tools for Secondary Metalworking Machinery
T337-C
Federal Item Identification Guide (FIIG_4065)
20967
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
9
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| N9BG | N9GD | 1 | G | Z | HD | GT | HD | 1 Jul 2006 | ||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 4 | CX | E NAVY EXPANDER LR6 SR6 FR1 | 79585 | | ||||||
| 3 | 2 | 4 | CX | 66006 | 66042 | | ||||||
| 3 | 2 | 1 | CX | 1385500 PC LR6/2/ SR6/1/ FR1/1/ | 80064 | | ||||||
| 4 | 1 | 4 | CX | MIL-E-17624 | 81349 | | ||||||
| 3 | 5 | 2 | X | HD | D | F1385500PCSR6FR1LR6 | 80064 | | ||||
| 5 | 2 | 4 | CX | LR6SR6FR1 | 66042 | | ||||||
| 5 | 2 | 1 | CX | 1385500 PC LR6 SR6 FR1 | 80064 | | ||||||
| 1 | 5 | 2 | 1 | HD | A | D168-078-E6SPARE | 11440 | | ||||
| 1 | 5 | 2 | 1 | HD | B | E-168-163ITEM102SPARE | 11440 | | ||||
| 1 | 5 | 2 | 1 | HD | B | E-168-670ITEM102SPARE | 11440 | | ||||
| 1 | 5 | 2 | 5 | HD | B | E164-863-102SPARE ROLL | 11440 | | ||||
| 1 | 5 | 2 | 1 | HD | A | E168-130 ITEM 102 SPARE ROLL | 11440 | | ||||
| 1 | 5 | 2 | 6 | HD | B | LR6SR6FR1 | 11440 | | ||||
| 1 | 5 | 2 | 6 | HD | B | 955-596-9LN49T51 | 23230 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
CX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Richmond, Richmond, VA 23297-5000
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
4
Reference Number Category Code (RNCC_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
X
Document Availability Code (DAC_2640)
DAC not known. Found on U.S. NSNs that were assigned before 1975. Cannot be used for new item assignment, or any maintenance action on older NSNs.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | CX | 0 | 31 Mar 1979 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
CX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Richmond, Richmond, VA 23297-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
31 Mar 1979
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 72E | Z | 9 | A | B | Z | W | 133300 | Z | 63220 | MACHINERY-MACHINES-NOI |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
72E
Water Commodity Code (WRT_CMDTY_CD_9275)
Engineer and Material Handling Equipment, Test/Tool sets and Equipment
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
133300
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
63220
Uniform Freight Classification (UFC_CD_MODF_3040)
MACHINERY-MACHINES-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
SE
Unit of Issue (UI_3050)
Set - A collection of matched or related items issued as a single item of supply, i.e., tool sets, instrument sets, and matched sets. Use only when the term “set” is a part of the item name.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 30 | 1 | AAA | 0.006 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 02 | X | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
30
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Waterproof protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
0.006 cu ft
Unit Pack Cube (UP_CU_5155)
02
Preservation Material Code (PRSRV_MAT_CD_5162)
MIL-PRF-16173, Grade 2, corrosion preventive, solvent cutback, cold application, soft film
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BPNY | Countersink Length | 0.218 INCHES NOMINAL |
| ZZZW | Departure From Cited Document | AS MODIFIED BY PARA 3.3.3 ROLLS |
| AMDL | First End Diameter | 0.262 INCHES NOMINAL |
| AMDL | First End Diameter | 0.295 INCHES NOMINAL |
| AAHE | First End Flare Length | 0.118 INCHES NOMINAL THIRD STYLE GROUP |
| AMDL | First End Diameter | 0.390 INCHES NOMINAL |
| AMCS | First End Taper Length | 0.023 INCHES NOMINAL |
| AMCS | First End Taper Length | 0.250 INCHES NOMINAL |
| ZZZT | Nondefinitive Spec/Std Data | 1 TYPE AND 1 CLASS |
| AGAH | Main Body Overall Length | 0.500 INCHES NOMINAL |
| AGAH | Main Body Overall Length | 2.125 INCHES NOMINAL |
| AGAH | Main Body Overall Length | 2.875 INCHES NOMINAL |
| AJUW | Roller Style | FLARE THIRD GROUP |
| AJUW | Roller Style | ROUNDED TAPER FIRST GROUP |
| AJUW | Roller Style | TAPER SECOND GROUP |
| ATBH | Roller Quantity | 1 |
| ATBH | Roller Quantity | 2 |
| AMFZ | Second End Diameter | 0.250 INCHES NOMINAL |
| AMFZ | Second End Diameter | 0.295 INCHES NOMINAL |
| AMFZ | Second End Diameter | 0.249 INCHES NOMINAL |
| BMZB | Second End Flare Diameter | SECOND STYLE GROUP 53.0 DEG AND THIRD STYLE GROUP 0.329 IN. |
| AMFM | Second End Taper Length | 0.031 INCHES NOMINAL |
| ABTZ | Overall Length | 0.859 NOMINAL INCHES |
| ABTZ | Overall Length | 2.375 NOMINAL INCHES |
| ABTZ | Overall Length | 3.156 NOMINAL INCHES |
Back to TopBack to Top
