3815-00-520-1967
FAIRLEAD,ROLLER
3815-00-520-1967 (3815005201967, 005201967)
Part Numbers (2 listings): 4229C | 792954-1 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 4229C | 3 - Design Control Reference | 2 - Production Item | LEBUS INTERNATIONAL INC | 17798 |  |
| 792954-1 | 7 - Vendor Item Drawing Reference | 2 - Production Item | RAYTHEON COMPANY | 96214 |  |
| 4229C | C - Advisory Reference | 1 - Incomplete Part Number | VIKING EXPLOSIVES AND SUPPLY INC | 75601 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 38 | 3815 | 005201967 | T160-F | 11557 | X | M | 3 | A | N | A | 0 | 19 Aug 1974 |
38
Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)
Construction, Mining, Excavating, and Highway Maintenance Equipment
T160-F
Federal Item Identification Guide (FIIG_4065)
11557
Item Naming Code (INC_4080)
19 Aug 1974
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
M
Type of Item Identification (TYP_II_4820)
Partial Descriptive - Reference Item Identification (Type 1A Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 May 1997 | |||||||||||||||||||||||||||||
| N9BZ | N9ZD | 3 | H | Z | GH | KE | 1 Mar 2006 | |||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
H
Acquisition Method Suffix Code (AMSC_2876)
The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | E | TX | D | 4229C | 17798 | | ||||
| 3 | 7 | 2 | B | TX | D | 792954-1 | 96214 | | ||||
| C | 1 | 6 | ZZ | AC | 4229C | 75601 | | |||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
B
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing. The drawing is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on Limited Rights information will not be released to the general public through publications or other media.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
AC
Service / Agency Designator Code (SADC_4672)
Navy
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | TX | 0 | 1 Dec 1974 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 72E | Z | 9 | A | V | Z | W | 133300 | Z | 63220 | MACHINERY-MACHINES-NOI |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
72E
Water Commodity Code (WRT_CMDTY_CD_9275)
Engineer and Material Handling Equipment, Test/Tool sets and Equipment
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
133300
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
63220
Uniform Freight Classification (UFC_CD_MODF_3040)
MACHINERY-MACHINES-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 32 | 1 | AAA | 9in x 6.8in x 5.4in | 0.191 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | NA | A | EC | 00 | E | H | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
32
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, waterproof bag, Sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
9in x 6.8in x 5.4in
Unit Pack Size (UP_SZ_5154)
0.191 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
A
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
1/4 inch thick
EC
Intermediate Container Code (INTMD_CTNR_CD_5167)
ASTM-D5118, Type CF, Class domestic, corrugated fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
H
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished using boxes fabricated in accordance with ASTMD5118, class weather-resistant.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
Back to TopBack to Top
