Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
CS4210-0007ACLH | 3 - Design Control Reference | 1 - Incomplete Part Number | DLA LAND AND MARITIME | 16236 | ![]() |
SCD539482 | 3 - Design Control Reference | 2 - Production Item | US ARMY COMMUNICATIONS & | 80063 | ![]() |
10687313 | 5 - Replaced / Discontinued | 2 - Production Item | U S ARMY AVIATION AND MISSILE | 18876 | ![]() |
5KS896990 | 5 - Replaced / Discontinued | 2 - Production Item | KIDDE-FENWAL INC | 0KDP7 | ![]() |
85-33305-01 | 5 - Replaced / Discontinued | 2 - Production Item | DEPARTMENT OF DEFENSE PROJECT | 30554 | ![]() |
F5COV | 5 - Replaced / Discontinued | 2 - Production Item | INDUSTRIAL SAFETY SUPPLY CO. INC. | 02788 | ![]() |
3304695-1 | 5 - Replaced / Discontinued | 2 - Production Item | CARLETON LIFE SUPPORT SYSTEMS INC. | 99251 | ![]() |
872072 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE INC | 61649 | ![]() |
898123 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE INC | 61649 | ![]() |
5R | 5 - Replaced / Discontinued | 9 - No Longer Used | ITT GRINNELL CORP | 80996 | ![]() |
4210002704512 | 5 - Replaced / Discontinued | 9 - No Longer Used | E.C.A ETABLISSEMENT | SCY13 | ![]() |
516035 | 5 - Replaced / Discontinued | 9 - No Longer Used | FRUEHAUF CORP | 23705 | ![]() |
88600 | 5 - Replaced / Discontinued | 9 - No Longer Used | FYR-FYTER CO INC | 01317 | ![]() |
76670TYPEPS5 | 5 - Replaced / Discontinued | 9 - No Longer Used | FYR-FYTER CO INC | 01317 | ![]() |
SC-D539482 | 5 - Replaced / Discontinued | 9 - No Longer Used | DATRON WORLD COMMUNICATIONS INC. | 66943 | ![]() |
5RAC02 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL FIRE EXTINGUISHER CORP | 99539 | ![]() |
5RC02 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL FIRE EXTINGUISHER CORP | 99539 | ![]() |
7700447-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | C SYSTEMS LLC | 088A2 | ![]() |
896990 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE-FENWAL INC | 0KDP7 | ![]() |
898123 | 5 - Replaced / Discontinued | 9 - No Longer Used | KIDDE-FENWAL INC | 0KDP7 | ![]() |
595805-001 | C - Advisory Reference | 1 - Incomplete Part Number | LITTON SYSTEMS INC. DIV NAVIGATION | 13973 | ![]() |
595805-001 | C - Advisory Reference | 1 - Incomplete Part Number | LITTON SYSTEMS INC. DIV NAVIGATION | 13973 | ![]() |
MILE468 | C - Advisory Reference | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | ![]() |
F5C0V | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
898123 | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
872072 | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
0E910TYPE1SIZE5 | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
5RA | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
O-E-910 TYPE-1,SIZE 5 | C - Advisory Reference | 1 - Incomplete Part Number | FEDERAL SPECIFICATIONS | 81348 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
42 | 4210 | 002704512 | T278-B | 42700 | X | 1 | A | Y | A | 1 Jan 1963 |
Firefighting, Rescue, and Safety Equipment; and Environmental Protection Equipment and Materials
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates information is in the Hazardous Materials Information Resource System (HMIRS).
Item does not contain Precious Metal.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YW01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Aug 1993 | |||||||||||||||||||||||||||||
ZS01 | 23 Oct 1997 | |||||||||||||||||||||||||||||
WI01 | 1 May 2001 | |||||||||||||||||||||||||||||
YA01 | 1 Dec 2001 | |||||||||||||||||||||||||||||
WB01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
A920 | A186 | 1 | G | Z | CD | AJ | CT | CL | CE | BF | BD | AZ | AM | 1 Jun 2006 | ||||||||||||||||
C918 | C003 | 1 | G | XH | 1 Jun 2006 | |||||||||||||||||||||||||
FGGI | FGKZ | 1 | G | Z | TG | 1 Jun 2006 | ||||||||||||||||||||||||
MC47 | MC10 | 1 | G | Z | PA | 1 Jun 2006 | ||||||||||||||||||||||||
N9BZ | N9ZD | 1 | G | Z | GH | GT | KE | JN | HD | 1 Jun 2006 | ||||||||||||||||||||
ZA01 | 1 Aug 2006 | |||||||||||||||||||||||||||||
WP01 | 1 Jun 2007 | |||||||||||||||||||||||||||||
YP01 | 1 Nov 2008 | |||||||||||||||||||||||||||||
YY01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
YK01 | 1 Feb 2015 | |||||||||||||||||||||||||||||
YD01 | 1 Jul 2016 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval ICP, Philadelphia, PA 19111
Naval Facilities Expeditionary Logistics Center, Port Hueneme, CA 93043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army Soldier's Biological and Chemical, Command, Natick, MA 01760
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
U.S. Army Engineer Division-Huntsville, Huntsville, AL 35807-4301
U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
U.S. Army Medical Materiel Agency, Frederick, MD 21701-5001
USCG Aircraft Repair and Supply Center, Elizabeth City, NC 27909-5001
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 3 | 1 | 1 | AX | A | CS4210-0007ACLH | 16236 | ![]() | ||||
3 | 3 | 2 | A | AX | D | SCD539482 | 80063 | ![]() | ||||
5 | 2 | 6 | AX | 85-33305-01 | 30554 | ![]() | ||||||
1 | 5 | 2 | F | AX | A | F5COV | 02788 | ![]() | ||||
5 | 2 | 6 | ZZ | 5KS896990 | 0KDP7 | ![]() | ||||||
1 | 5 | 2 | A | AX | D | 10687313 | 18876 | ![]() | ||||
5 | 2 | 6 | AX | 3304695-1 | 99251 | ![]() | ||||||
5 | 9 | 6 | ZZ | 5RAC02 | 99539 | ![]() | ||||||
3 | 5 | 9 | 6 | AX | B | 5RC02 | 99539 | ![]() | ||||
3 | 5 | 9 | 6 | AX | D | 516035 | 23705 | ![]() | ||||
4 | 5 | 9 | 9 | YP | B | 4210002704512 | SCY13 | ![]() | ||||
5 | 9 | 6 | ZZ | 896990 | 0KDP7 | ![]() | ||||||
5 | 9 | 6 | ZZ | 898123 | 0KDP7 | ![]() | ||||||
5 | 9 | 6 | AX | B | 7700447-1 | 088A2 | ![]() | |||||
3 | 5 | 9 | 6 | AX | B | 76670TYPEPS5 | 01317 | ![]() | ||||
1 | 5 | 9 | 6 | AX | B | 88600 | 01317 | ![]() | ||||
5 | 9 | 6 | AX | B | 872072 | 61649 | ![]() | |||||
5 | 9 | 6 | AX | B | 898123 | 61649 | ![]() | |||||
5 | 9 | 5 | ZZ | SC-D539482 | 66943 | ![]() | ||||||
3 | 5 | 9 | 6 | AX | B | 5R | 80996 | ![]() | ||||
C | 1 | 6 | ZZ | AA | O-E-910 TYPE-1,SIZE 5 | 81348 | ![]() | |||||
C | 1 | E | AX | 6 | AF | MILE468 | 81349 | ![]() | ||||
C | 1 | 6 | AX | 6 | AO | 595805-001 | 13973 | ![]() | ||||
C | 1 | 6 | ZZ | AC | 0E910TYPE1SIZE5 | D9182 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 5RA | D9182 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 872072 | D9182 | ![]() | |||||
C | 1 | 6 | ZZ | AC | 898123 | D9182 | ![]() | |||||
C | 1 | 6 | ZZ | AC | F5C0V | D9182 | ![]() |
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
The reference number is represented by engineering data other than an engineering drawing. The data is available for limited use under the terms of the rights-in-data clause of the contract by which the data was obtained and will be furnished by the activity identified by the RNAAC upon request. Descriptive data based on Limited Rights information will not be released to the general public through publications or other media.
USA
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
The reference number is of the type for which an indication of document availability is not required.
Morocco
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
Army
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
The item of supply represented by the possible duplicate National Stock Number (NSN) is not a technically acceptable replacement in the application requiring the item of production identified by the submitted reference. (Justification Code 6 shall be used only for those reference numbers which are coded Reference Number Category Code (RNCC) C and Reference Number Variation Code (RNVC) 1.)
Defense Logistics Agency
Army / Defense Logistics Agency
Navy
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
1 | AX | 0 | 3 | D4 | 1 | 1 Feb 1963 | 4210000337041 | 8 Oct 1965 |
1 | AX | 0 | 3 | D4 | 1 | 1 Feb 1963 | 4210002239901 | 8 Oct 1965 |
1 | AX | 0 | 3 | D4 | 0 | 1 Feb 1963 | 4210002239906 | 8 Oct 1965 |
1 | AX | 0 | 3 | D4 | 0 | 1 Feb 1963 | 4210002239907 | 8 Oct 1965 |
1 | AX | 0 | 3 | D4 | 1 | 1 Feb 1963 | 4210002704403 | 8 Oct 1965 |
1 | AX | 0 | 3 | D4 | 1 | 1 Feb 1963 | 4210005809087 | 8 Oct 1965 |
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
U.S. Army Belvoir Research, Development and, Engineering Center, Fort Belvoir, VA 22060-5606
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
634 | G | 9 | A | B | D | W | 069185 | Z | 38280 | FIRE-EXTINGUISHERS-CHEMICAL |
Cylinders, Compressed Gas, Filled or Empty
Nonflammable compressed gas, UN class 2 (nonflammable gas label; Except: (1) oxygen which requires an oxidizer label, and (2) fluorine which requires poison and oxidizer labels)
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Hazardous material (not required hand to hand receipt) including all regulated items other than special weapons and their components.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | D | J | 1 | Z | EA | 0 | |
DF | SMS | D | J | 1 | U | EA | 0 | |
DM | SMS | D | J | 1 | F | EA | 0 | |
DN | SMS | D | J | 1 | EA | 0 | ||
DS | SMS | D | J | 1 | F | EA | 0 | |
GP | SMS | D | J | 1 | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Pilferage - Pilferage controls may be designated by the coding activity to items coded U (Unclassified) by recording the item to J.
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC NF2: AF Equipment Management System (AFEMS); NAVY: Fast moving centrally managed 1I COG forms (locally procured at selected designated overseas activities)
ARMY: If condemned or uneconomically repairable, then dispose at direct support (ds) level; DLA: This item has been reviewed and a determination made that the item can be restored to a serviceable condition from an unserviceable condition at the organizational/field level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at the third echelon level; NAVY: (1) Fast-Moving 1I Cog Forms (2) Non-Perishable Provisions
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
U.S. Coast Guard
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | HM | XXX | 18.0 lbs | 0.495 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
X | ZZ | ZZ | E | Q | M |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Packaging and marking for hazardous materials shall comply with applicable requirements for Performance Oriented Packaging contained in the International Air Transport Association (IATA) Dangerous Goods Regulations or the International Maritime Dangerous Goods Code (IMDG) and with Code of Federal Regulations (CFR) Title 29, Title 40 and Title 49. All performance test requirements shall be supported by certificates and reports attesting to the date and the results obtained from performance oriented packaging testing. The contractor, if not a self-certifier, shall be responsible for assuring that third party sources providing performance testing services are, in fact, registered with the Department of Transportation. The contractor's signed certification that the packaged configuration meets IATA or IMDG requirements shall be incorporated on the DD Form 250, Material Inspection and Receiving Report, and other related acceptance document if the DD Form 250 is not used. All certificates and reports shall be available for inspection by authorized Government representatives for a period of three years.
As required to protect the item or elements of the package
Special requirement – See specific instructions or drawings provided.
Special requirements
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.