Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
114D4044-31 | 1 - Source of Control Reference | 2 - Production Item | THE BOEING COMPANY | 77272 | |
36X5800016D0244 | 3 - Design Control Reference | 2 - Production Item | HYDRASEARCH CO., INC. | 32142 | |
701026-16D0244 | 3 - Design Control Reference | 2 - Production Item | EATON CORPORATION | 00624 | |
41X5800016D0244 | 5 - Replaced / Discontinued | 9 - No Longer Used | DANA CORP | 79470 | |
36X5800016D0244 | 5 - Replaced / Discontinued | 9 - No Longer Used | DESIGNED METAL CONNECTIONS, INC. | 14798 |
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
47 | 4720 | 000778783 | A542A0 | 20311 | X | 4 | 3 | A | N | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
ZU01 | 1 Jun 1994 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 1 | 2 | 5 | CT | D | 114D4044-31 | 77272 | |||||
3 | 3 | 2 | 5 | CT | D | 701026-16D0244 | 00624 | |||||
4 | 3 | 2 | 5 | 9Z | D | 36X5800016D0244 | 32142 | |||||
1 | 5 | 9 | 5 | CT | B | 36X5800016D0244 | 14798 | |||||
3 | 5 | 9 | 5 | CT | B | 41X5800016D0244 | 79470 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
DLIS-K, Battle Creek, MI 49037-3084
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | AX | 0 | 4 May 1970 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
736 | Z | 9 | A | B | Z | W | 051140 | Z | 52350 | HOSE-NOI-TUBING |
Plumbing Supplies
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | AE | 1 | AAA |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | X | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Seal or plug all openings and preserve by Method 10.
Any suitable process that is not injurious to the item.
No requirement
As required to protect the item or elements of the package
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AKUU | End Connection Design | ELBOW 2ND END |
AKUU | End Connection Design | STRAIGHT 1ST END |
CQBD | Burst Test Pressure | 2500.0 POUNDS PER SQUARE INCH |
AHNC | Connection Style | SWIVEL NUT, FLARELESS 1ST END |
AHNC | Connection Style | SWIVEL NUT, FLARELESS 2ND END |
AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
AAGR | Cross-Sectional Shape Style | ROUND |
ADJS | Exterior Color | NATURAL |
CBBL | Features Provided | INTERNAL SUPPORT |
CRFY | Flow Angle | 45.0 DEGREES 2ND END |
CRDW | Hydrostatic Test Pressure | 1500.0 POUNDS PER SQUARE INCH |
CQGM | Maximum Operating Pressure | 750.0 POUNDS PER SQUARE INCH |
CRXX | Measuring Method And Length | 24.500 INCHES NOMINAL WORKING |
MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
ACKH | Minimum Inside Bending Radius | 5.500 INCHES |
CQJX | Nominal Thread Size | 1.312 INCHES 1ST END |
CQJX | Nominal Thread Size | 1.312 INCHES 2ND END |
ABKV | Outside Diameter | 1.1156 INCHES NOMINAL |
AARX | Inside Diameter | 0.875 INCHES NOMINAL |
CRWL | Inside Surface Condition | SMOOTH |
CQCS | Layer Composition And Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER HELIX CORROSION RESISTANT STEEL COIL |
CQRB | Seat Angle | 12.0 DEGREES 1ST END |
CQRB | Seat Angle | 12.0 DEGREES 2ND END |
ZZZK | Specification/Standard Data | 77272-114D4044-31 MANUFACTURERS SOURCE CONTROL |
ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
AAJD | Thread Class | 3B 2ND END |
AAJD | Thread Class | 3B 1ST END |
AAJF | Thread Direction | RIGHT-HAND 1ST END |
AAJF | Thread Direction | RIGHT-HAND 2ND END |
THSD | Thread Series Designator | UN 1ST END |
THSD | Thread Series Designator | UN 2ND END |
CMLP | Thread Quantity Per Inch | 12 1ST END |
CMLP | Thread Quantity Per Inch | 12 2ND END |