4730-00-022-2749
COUPLING HALF,QUICK DISCONNECT
4730-00-022-2749 (4730000222749, 000222749)
Part Numbers (3 listings): 3014732 | SPHB4-4-56-303 | 4770-2 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 3014732 | 1 - Source of Control Reference | 2 - Production Item | NAVAIR AND NAVSEA MANAGED | 10001 |  |
| SPHB4-4-56-303 | 3 - Design Control Reference | 2 - Production Item | SNAP-TITE COMPONENTS INC | 78357 |  |
| 4770-2 | 5 - Replaced / Discontinued | 2 - Production Item | SNAP-TITE COMPONENTS INC | 78357 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 47 | 4730 | 000222749 | A531T0 | 18681 | X | 4 | 4 | A | N | A | 0 | 19 Jan 1973 |
4730
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Hose, Pipe, Tube, Lubrication, and Railing Fittings
A531T0
Federal Item Identification Guide (FIIG_4065)
18681
Item Naming Code (INC_4080)
19 Jan 1973
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
4
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist but technical data sufficient for preparation of a full descriptive method item identification could not be acquired after several follow-up actions during a 150-day suspense period. Includes such reasons as: Industry refuses to provide the technical data based on policy, restricted or proprietary rights, non-existence of technical data, etc. (This code cannot be used in submittals for National Item Identification Number (NIIN) assignment or reinstatement.)
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jun 1997 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Dec 1999 | |||||||||||||||||||||||||||||
| WP01 | 1 Jan 2005 | |||||||||||||||||||||||||||||
| FXGC | FXAX | 3 | B | Z | SX | 1 Apr 2005 | ||||||||||||||||||||||||
| N9BC | N9CD | 3 | B | Z | HD | GT | HD | 1 Apr 2005 | ||||||||||||||||||||||
| ZB01 | 1 Nov 2006 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 2 | 1 | HD | D | 3014732 | 10001 | | ||||
| 3 | 3 | 2 | 5 | HD | D | SPHB4-4-56-303 | 78357 | | ||||
| 1 | 5 | 2 | 5 | HD | A | 4770-2 | 78357 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | AX | 0 | 1 Dec 1974 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HD | 576 | Z | 9 | A | B | Z | Q | 050825 | X | 49780 | CLAMPS-R-COUPLINGS-PIPE |
HD
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
050825
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49780
Uniform Freight Classification (UFC_CD_MODF_3040)
CLAMPS-R-COUPLINGS-PIPE
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.2 lbs | 0.010 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | CA | 00 | 0 | BV | DO | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.2 lbs
Unit Pack Weight (UP_WT_5153)
0.010 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
CA
Wrapping Material Code (WRAP_MAT_CD_5163)
A-A-203, kraft wrapping paper
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
BV
Unit Container Code (UNIT_CTNR_CD_5166)
MIL-DTL-117, Type III, Class C, Style 1, medium duty, waterproof, greaseproof, opaque bag.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AHNC | Connection Style | FLARED ALL ENDS |
| AWLS | Connection Type | INTERNAL QUICK DISCONNECT SECOND QUICK DISCONNECT END |
| AWLS | Connection Type | THREADED EXTERNAL TUBE FIRST FLUID END CONNECTION |
| CQJX | Nominal Thread Size | 0.438 INCHES ALL ENDS |
| AHSJ | Leg Length | 0.650 INCHES NOMINAL |
| ADLN | Quick Disconnect Method | PUSH-PULL SECOND QUICK DISCONNECT END |
| ABHP | Overall Length | 1.530 INCHES NOMINAL |
| CMLP | Thread Quantity Per Inch | 20 ALL ENDS |
| THSD | Thread Series Designator | UNF ALL ENDS |
| AJAG | Unpackaged Unit Width | 1.000 INCHES NOMINAL |
| STYL | Style Designator | MALE COUPLING HALF |
| AAJD | Thread Class | 3A ALL ENDS |
Back to TopBack to Top
