Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
WWU531-13TA | 2 - Definitive Specification or Standard Document | 2 - Production Item | FEDERAL SPECIFICATIONS | 81348 | ![]() |
694 1/2 GALV | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | STOCKHAM VALVES AND FITTINGS INC | 82666 | ![]() |
D11080-7-8 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | CHIEF OF ENGINEERS | 81336 | ![]() |
PT1280 | 5 - Replaced / Discontinued | 9 - No Longer Used | CRANE CO | 14959 | ![]() |
F1G18 | 5 - Replaced / Discontinued | 9 - No Longer Used | UNIVERSAL-GRABLER CORP | 73854 | ![]() |
PT18 | 5 - Replaced / Discontinued | 9 - No Longer Used | UNIVERSAL-GRABLER CORP | 73854 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
47 | 4730 | 002401674 | A080B0 | 03785 | X | 4 | 3 | Q | N | U | 1 Jan 1963 |
Hose, Pipe, Tube, Lubrication, and Railing Fittings
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
CCLI — Commerce Control List Item Demilitarization not required. CCLI are dual-use (military, commercial, and other strategic uses) items under the jurisdiction of the Bureau of Export Administration, U.S. Department of Commerce, through the Export Administration Regulations. The types of items under the Commerce Control List (CCL) are commodities (i.e., equipment, materials, electronics, propulsion systems, etc.), software, and technology. The CCL does not include those items exclusively controlled by another department or agency of the U.S. Government.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
A920 | A181 | 1 | G | Z | CD | AZ | CE | 1 Apr 2006 | ||||||||||||||||||||||
FXGC | FXAX | 1 | G | Z | SX | 1 Apr 2006 | ||||||||||||||||||||||||
G01X | G01C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G10X | G10C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G12X | G12C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G17X | G17C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G18X | G18C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G26X | G26C | 1 | G | 26 | 1 Apr 2006 | |||||||||||||||||||||||||
G33X | G33C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G37X | G37C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G42X | G42C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G53X | G53C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G65X | G65C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G72X | G72C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G77X | G77C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G80X | G80C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G86X | G86C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
G93X | G93C | 1 | G | 1 Apr 2006 | ||||||||||||||||||||||||||
MC40 | MC01 | 1 | G | Z | PA | 1 Apr 2006 | ||||||||||||||||||||||||
N9BC | 1 | G | Z | GH | GG | 1 Dec 2013 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Philadelphia, PA 19111û5098
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
U.S. Army Engineer Division-Huntsville, Huntsville, AL 35807-4301
Department of Justice, Washington, DC 20534
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 2 | E | AX | D | WWU531-13TA | 81348 | ![]() | ||||
4 | 5 | 1 | E | AX | A | 694 1/2 GALV | 82666 | ![]() | ||||
3 | 5 | 1 | 6 | AX | D | D11080-7-8 | 81336 | ![]() | ||||
3 | 5 | 9 | E | AX | B | PT1280 | 14959 | ![]() | ||||
3 | 5 | 9 | 6 | AX | B | F1G18 | 73854 | ![]() | ||||
3 | 5 | 9 | E | AX | B | PT18 | 73854 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | AX | 0 | 2 Mar 1976 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
576 | Z | 9 | A | B | Z | W | 052190 | Z | 30000 | PIPE-TUBING-OR-PIPE-OR-TUBING-FITTI |
Metal and Metal Products, (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | D | U | 1 | Z | PG | 0 | |
DF | SMS | D | U | 1 | N | PG | 0 | |
DM | SMS | D | U | 1 | Z | PG | 0 | |
DN | SMS | D | U | 1 | PG | 0 | ||
DS | SMS | D | U | 1 | N | PG | 0 |
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Package - A form of protective wrapping for two or more of the same item of supply. To be used only when a unit of measure or container type term is not applicable. Includes “envelope”. *Requires a quantitative expression
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 10 | 1 | AAA | 0.4 lbs | 0.003 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 0 | A1 | DO | 00 | Q | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
Not Applicable
Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal.
Any suitable fiber box included in this table may be used (see J.4.9.1).
No special marking
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHNC | Connection Style | PLAIN (PIPE) ALL ENDS |
AWLS | Connection Type | THREADED INTERNAL PIPE ALL ENDS |
CQNM | Coupling Flange Shape | HEXAGON |
MDCL | Material Document And Classification | QQ-I-666 FED SPEC 1ST MATERIAL RESPONSE NUT OR ASTM A47 ASSN STD 1ST MATERIAL RESPONSE NUT OR ASTM A197 ASSN STD 1ST MATERIAL RESPONSE NUT OR ANSI G49.1 ASSN STD 1ST MATERIAL RESPONSE NUT OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE NUT OR ASTM A675 ASSN STD 2ND MATERIAL RESPONSE NUT |
MDCL | Material Document And Classification | QQ-I-666 FED SPEC 1ST MATERIAL RESPONSE TAILPIECE OR ASTM A47 ASSN STD 1ST MATERIAL RESPONSE TAILPIECE OR ASTM A197 ASSN STD 1ST MATERIAL RESPONSE TAILPIECE OR ANSI G49.1 ASSN STD 1ST MATERIAL RESPONSE TAILPIECE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE TAILPIECE OR ASTM A675 ASSN STD 2ND MATERIAL RESPONSE TAILPIECE |
MDCL | Material Document And Classification | QQ-I-666 FED SPEC 1ST MATERIAL RESPONSE THREAD PIECE OR ASTM A47 ASSN STD 1ST MATERIAL RESPONSE THREAD PIECE OR ASTM A197 ASSN STD 1ST MATERIAL RESPONSE THREAD PIECE OR ANSI G49.1 ASSN STD 1ST MATERIAL RESPONSE THREAD PIECE OR ASTM A576 ASSN STD 2ND MATERIAL RESPONSE THREAD PIECE OR ASTM A675 ASSN STD 2ND MATERIAL RESPONSE THREAD PIECE |
MATT | Material | COPPER ALLOY SEAT |
MATT | Material | IRON NUT OR STEEL NUT |
MATT | Material | IRON TAILPIECE OR STEEL TAILPIECE |
MATT | Material | IRON THREAD PIECE OR STEEL THREAD PIECE |
AEHZ | Maximum Operating Temp | 450.0 DEG FAHRENHEIT 1ST RESPONSE |
AEHZ | Maximum Operating Temp | 450.0 DEG FAHRENHEIT 2ND RESPONSE |
CQGM | Maximum Operating Pressure | 150.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
CQGM | Maximum Operating Pressure | 300.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
MEDA | Media For Which Designed | STEAM 1ST RESPONSE |
MEDA | Media For Which Designed | WATER-OIL-GAS 2ND RESPONSE |
CWFR | Nominal Overall Length | 1.720 INCHES |
CQJX | Nominal Thread Size | 0.500 INCHES ALL ENDS |
ACSP | Reducer Type | CONCENTRIC |
ACSG | Seat Type | GROUND JOINT |
STYL | Style Designator | SCREWED |
STDC | Surface Treatment Document And Classification | QQ-Z-325,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL OR ASTM A153,CLASS A ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
SFTT | Surface Treatment | ZINC OVERALL |
THSD | Thread Series Designator | NPT ALL ENDS |