4730-00-246-9218
ELBOW,PIPE
4730-00-246-9218 (4730002469218, 002469218)
Part Numbers (18 listings): ASMEB16.3 | 221-415 | 141621 | 13218E0051-5 | 8700085 | 3-4X90DG150PS1 | 901046-5 | 71187A | 50487 | 4364A | M1296 | 5PS955 | 6012 | X12298 | WWP521TYPE1 | 1146498 | 11033-4 | ELL538 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| ASME B16.3 | 3 - Design Control Reference | 1 - Incomplete Part Number | AMERICAN SOCIETY OF MECHANICAL | 05047 |  |
| 221-415 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | CNH AMERICA LLC | 10988 |  |
| 141621 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | MTU AMERICA INC. | 72582 |  |
| 13218E0051-5 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | CECOM LR CENTER | 97403 |  |
| 8700085 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
| 3-4X90DG150PS1 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | CRANE CO | 14959 |  |
| 901046-5 | 5 - Replaced / Discontinued | 9 - No Longer Used | SULLIVAN MACHINERY CO | 89413 |  |
| 71187A | 5 - Replaced / Discontinued | 9 - No Longer Used | AIR PRODUCTS AND CHEMICALS, INC. | 00742 |  |
| 50487 | 5 - Replaced / Discontinued | 9 - No Longer Used | CRANE PUMPS & SYSTEMS, INC. | 96046 |  |
| 141621 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| 141621 | 5 - Replaced / Discontinued | 9 - No Longer Used | EUCLID INC | 30379 |  |
| 141621 | 5 - Replaced / Discontinued | 9 - No Longer Used | TAYLOR MACHINE WORKS, INC. | 27618 | |
| 4364A | 5 - Replaced / Discontinued | 9 - No Longer Used | HERCULES ENGINE CO INC | 28265 |  |
| M1296 | 5 - Replaced / Discontinued | 9 - No Longer Used | GARDNER DENVER INC. | 11568 | |
| 5PS955 | 5 - Replaced / Discontinued | 9 - No Longer Used | NEAC COMPRESSOR SERVICE USA INC | 88807 | |
| 6012 | 5 - Replaced / Discontinued | 9 - No Longer Used | POLLEY INC | 96822 | |
| X12298 | 5 - Replaced / Discontinued | 9 - No Longer Used | TELEDYNE CONTINENTAL MOTORS | 14351 |  |
| WWP521TYPE1 | 5 - Replaced / Discontinued | 9 - No Longer Used | FEDERAL SPECIFICATIONS | 81348 |  |
| 1146498 | 5 - Replaced / Discontinued | 9 - No Longer Used | CONMACO INC | 62303 | |
| 11033-4 | 5 - Replaced / Discontinued | 9 - No Longer Used | ITT GRINNELL CORP | 80996 | |
| 1103 3-4 | 5 - Replaced / Discontinued | 9 - No Longer Used | ITT GRINNELL CORP | 80996 | |
| ELL538 | C - Advisory Reference | 1 - Incomplete Part Number | WORTHINGTON COMPRESSORS INC | 93234 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 47 | 4730 | 002469218 | A080B0 | 03768 | X | 4 | 3 | A | N | U | 1 Jan 1961 |
4730
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Hose, Pipe, Tube, Lubrication, and Railing Fittings
A080B0
Federal Item Identification Guide (FIIG_4065)
03768
Item Naming Code (INC_4080)
1 Jan 1961
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G880 | 0 | 0 | C | 1 Apr 1991 | ||||||||||||||||||||||||||
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Feb 1996 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jun 1997 | |||||||||||||||||||||||||||||
| YW01 | 1 Jan 1998 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| WI01 | 1 Feb 2001 | |||||||||||||||||||||||||||||
| G93X | G93C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| MC40 | MC01 | 1 | G | Z | PA | 1 Apr 2005 | ||||||||||||||||||||||||
| N9BC | NICD | 1 | G | Z | GH | GT | KE | HD | 1 Apr 2005 | |||||||||||||||||||||
| A920 | A181 | 1 | G | Z | CD | AZ | CL | BF | 1 Apr 2005 | |||||||||||||||||||||
| FXGC | FXAX | 1 | G | Z | SX | 1 Apr 2005 | ||||||||||||||||||||||||
| G01X | G01C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G10X | G10C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G15X | G15C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G16X | G16C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G26X | G26C | 1 | G | 26 | 1 Apr 2005 | |||||||||||||||||||||||||
| G65X | G65C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G72X | G72C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G80X | G80C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
| G81X | G81C | 1 | G | 1 Apr 2005 | ||||||||||||||||||||||||||
0
Acquisition Method Code (AMC_2871)
Not Established
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
CD
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
AZ
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
CL
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
BF
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000
26
Supplementary Receivers (SUPPLM_RCVR_2534)
Department of Justice, Washington, DC 20534
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | E | ZZ | ASME B16.3 | 05047 | | ||||||
| 1 | 5 | 1 | E | AX | A | 221-415 | 10988 | | ||||
| 3 | 5 | 1 | 6 | AX | D | 3-4X90DG150PS1 | 14959 | | ||||
| 3 | 5 | 1 | A | AX | D | 8700085 | 19207 | | ||||
| 3 | 5 | 1 | 6 | AX | D | 141621 | 72582 | | ||||
| 1 | 5 | 1 | A | AX | C | 13218E0051-5 | 97403 | | ||||
| 3 | 5 | 9 | E | AX | B | 71187A | 00742 | | ||||
| 5 | 9 | 6 | AX | B | 50487 | 96046 | | |||||
| 3 | 5 | 9 | 6 | AX | B | 6012 | 96822 | | ||||
| 3 | 5 | 9 | E | AX | B | 1103 3-4 | 80996 | | ||||
| 5 | 9 | A | AX | B | 11033-4 | 80996 | | |||||
| 3 | 5 | 9 | 6 | AX | B | WWP521TYPE1 | 81348 | | ||||
| 3 | 5 | 9 | 6 | AX | B | 5PS955 | 88807 | | ||||
| 3 | 5 | 9 | E | AX | B | 901046-5 | 89413 | | ||||
| 3 | 5 | 9 | 6 | AX | B | 141621 | 24617 | | ||||
| 5 | 9 | 6 | AX | B | 141621 | 27618 | | |||||
| 3 | 5 | 9 | 6 | AX | B | 4364A | 28265 | | ||||
| 3 | 5 | 9 | 6 | AX | B | 141621 | 30379 | | ||||
| 5 | 9 | A | AX | 1146498 | 62303 | | ||||||
| 3 | 5 | 9 | E | AX | B | M1296 | 11568 | | ||||
| 3 | 5 | 9 | 6 | AX | B | X12298 | 14351 | | ||||
| 3 | C | 1 | 6 | AX | D | ELL538 | 93234 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
C
Reference Number Status Code (RNSC_2923)
The reference number originates from a descriptive technical document of the product, which may be used as a procurement document without restrictions. The NCAGE specified for this reference number identifies the originating organization or agency of the document but not the supply source of the item. NOTE: This code is to be allocated to reference numbers originating from generally available specifications/standards or to drawing numbers for which the Government has separate property rights or for which the author does not claim any property rights.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 96 | 0 | 23 Dec 1995 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
96
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
23 Dec 1995
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 576 | Z | 9 | A | B | Z | W | 052190 | Z | 30000 | PIPE-TUBING-OR-PIPE-OR-TUBING-FITTI |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
052190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
30000
Uniform Freight Classification (UFC_CD_MODF_3040)
PIPE-TUBING-OR-PIPE-OR-TUBING-FITTI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DA | SMS | Z | U | B | Z | EA | 0 | |
| DF | SMS | Z | U | B | N | EA | 0 | |
| DM | SMS | Z | U | B | Z | EA | 0 | |
| DN | SMS | Z | U | B | EA | 0 | ||
| DS | SMS | Z | U | B | N | EA | 0 |
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
B
Quantity Unit Pack (QUP_6106)
12
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.4 lbs | 0.006 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 0 | D3 | DO | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.4 lbs
Unit Pack Weight (UP_WT_5153)
0.006 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| MATT | Material | IRON OVERALL |
| MDCL | Material Document And Classification | ASTM A197 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MEDA | Media For Which Designed | STEAM 1ST RESPONSE |
| MEDA | Media For Which Designed | WATER-OIL-GAS 2ND RESPONSE |
| CQGM | Maximum Operating Pressure | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| AEHZ | Maximum Operating Temp | 260.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS | Connection Type | THREADED INTERNAL PIPE 1ST END |
| AWLS | Connection Type | THREADED EXTERNAL PIPE 2ND END |
| AHNC | Connection Style | PLAIN (PIPE) 1ST END |
| AHNC | Connection Style | PLAIN (PIPE) 2ND END |
| THSD | Thread Series Designator | NPT ALL ENDS |
| CQJX | Nominal Thread Size | 0.750 INCHES ALL ENDS |
| AHSJ | Leg Length | 1.891 INCHES NOMINAL 1ST END |
| AHSJ | Leg Length | 1.312 INCHES NOMINAL 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES |
| FEAT | Special Features | GRUMMAN AEROSPACE A-10 AIRCRAFT |
| ZZZT | Nondefinitive Spec/Std Data | 1 TYPE |
Back to TopBack to Top
