4730-00-469-4982
BOLT,FLUID PASSAGE
4730-00-469-4982 (4730004694982, 004694982)
Part Numbers (2 listings): NAS1236A6H | NAS1236A6 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| NAS1236A6H | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 |  |
| NAS1236A6H | 5 - Replaced / Discontinued | 2 - Production Item | HYDRO FITTING MANUFACTURING | 13899 |  |
| NAS1236A6 | C - Advisory Reference | 1 - Incomplete Part Number | NATIONAL AEROSPACE STANDARDS | 80205 | |
| NAS1236A6 | C - Advisory Reference | 1 - Incomplete Part Number | NATIONAL AEROSPACE STANDARDS | 80205 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 47 | 4730 | 004694982 | A121A0 | 18683 | X | 1 | A | N | U | 30 Jan 1970 |
4730
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Hose, Pipe, Tube, Lubrication, and Railing Fittings
A121A0
Federal Item Identification Guide (FIIG_4065)
18683
Item Naming Code (INC_4080)
30 Jan 1970
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Jun 1994 | |||||||||||||||||||||||||||||
| ZN01 | 1 Feb 1995 | |||||||||||||||||||||||||||||
| YJ01 | 1 May 1996 | |||||||||||||||||||||||||||||
| YB01 | 1 Feb 2000 | |||||||||||||||||||||||||||||
| A920 | A181 | 1 | G | Z | CT | CT | 1 Apr 2006 | |||||||||||||||||||||||
| FXGC | FXAX | 1 | G | Z | SX | 1 Apr 2006 | ||||||||||||||||||||||||
| ZC01 | 1 Nov 2010 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
CT
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
CT
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 3 | AX | D | NAS1236A6H | 80205 | | ||||
| 5 | 2 | 6 | ZZ | NAS1236A6H | 13899 | | ||||||
| C | 1 | 6 | AX | 6 | AW | NAS1236A6 | 80205 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
6
Reference Number Justification Code (RNJC_2750)
The item of supply represented by the possible duplicate National Stock Number (NSN) is not a technically acceptable replacement in the application requiring the item of production identified by the submitted reference. (Justification Code 6 shall be used only for those reference numbers which are coded Reference Number Category Code (RNCC) C and Reference Number Variation Code (RNVC) 1.)
AW
Service / Agency Designator Code (SADC_4672)
Air Force / Defense Logistics Agency
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | AX | 0 | 1 Apr 1971 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
AX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43216-5000
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Apr 1971
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AX | 576 | Z | 9 | A | B | Z | Q | 013280 | X | 05450 | ALUM-BOLTS |
AX
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Columbus, Columbus, OH 43216-5000
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
013280
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
05450
Uniform Freight Classification (UFC_CD_MODF_3040)
ALUM-BOLTS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
PG
Unit of Issue (UI_3050)
Package - A form of protective wrapping for two or more of the same item of supply. To be used only when a unit of measure or container type term is not applicable. Includes “envelope”. *Requires a quantitative expression
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.008 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 0 | BV | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
0.008 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
BV
Unit Container Code (UNIT_CTNR_CD_5166)
MIL-DTL-117, Type III, Class C, Style 1, medium duty, waterproof, greaseproof, opaque bag.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BBLB | Distance From First Radial Hole Center To End Of Bolt | 0.844 INCHES MINIMUM AND 0.864 INCHES MAXIMUM |
| AAQL | Body Style | BODY WRENCHING |
| AAXC | Concentric Hole Diameter | 0.287 INCHES MINIMUM AND 0.307 INCHES MAXIMUM |
| BBKL | First Diameter From Wrenching Feature | 0.559 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ACKM | First End Connection Type | THREADED EXTERNAL TUBE |
| CQYM | First End Nominal Thread Size | 0.562 INCHES |
| ACLK | First End Thread Class | 3A |
| ACLL | First End Thread Direction | RIGHT-HAND |
| ATKZ | First End Thread Length | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| CQMM | First End Thread Series Designator | UNF |
| ACKN | First End Style Designator | PLAIN |
| BBKY | First Radial Fluid Hole Diameter | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MDCL | Material Document And Classification | QQ-A-225/4,T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | ALUMINUM ALLOY |
| BBLD | Length From Bearing Surface Of Wrenching Feature To Bolt End | 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM |
| BBKR | Length From Bearing Surface Of Wrenching Feature To End Of First Diameter | 0.963 INCHES MINIMUM AND 0.973 INCHES MAXIMUM |
| ACLS | Second End Connection Type | THREADED EXTERNAL TUBE |
| CRNB | Second End Nominal Thread Size | 0.562 INCHES |
| CRCN | Second End Seat Angle | 12.0 DEGREES NOMINAL |
| ACMR | Second End Thread Class | 3A |
| ACMS | Second End Thread Direction | RIGHT-HAND |
| ATLF | Second End Thread Length | 0.469 INCHES NOMINAL |
| CRPF | Second End Thread Series Designator | UNF |
| ABHP | Overall Length | 2.031 INCHES NOMINAL |
| ASDB | Width Across Flats | 0.797 INCHES MINIMUM AND 0.829 INCHES MAXIMUM |
| BBLF | Wrenching Feature Height | 0.199 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| BBDF | Wrenching Feature Style | HEXAGON |
| ACLT | Second End Style Designator | |
| ZZZK | Specification/Standard Data | 80205-NAS1236 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SFTT | Surface Treatment | ANODIZE |
Back to TopBack to Top
