4730-00-618-8360
BOLT,FLUID PASSAGE
4730-00-618-8360 (4730006188360, 006188360)
Part Numbers (2 listings): MS21940-8L | ER01248 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS21940-8L | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| ER01248 | 5 - Replaced / Discontinued | 9 - No Longer Used | DANA CORP | 79470 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 47 | 4730 | 006188360 | A121A0 | 18683 | X | 4 | 9 | A | N | U | 1 Jan 1961 |
4730
Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)
Hose, Pipe, Tube, Lubrication, and Railing Fittings
A121A0
Federal Item Identification Guide (FIIG_4065)
18683
Item Naming Code (INC_4080)
1 Jan 1961
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
9
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YJ | ||||||||||||||||||||||||||||||
| YW | ||||||||||||||||||||||||||||||
| ZE | ||||||||||||||||||||||||||||||
| ZZ | ||||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YW01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| N9BC | 1 | T | Z | GH | KE | 1 Apr 2005 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
T
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 3 | AX | D | MS21940-8L | 96906 | | ||||
| 3 | 5 | 9 | 3 | AX | B | ER01248 | 79470 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
AX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43216-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 576 | Z | 9 | A | B | Z | Q | 013280 | X | 05450 | ALUM-BOLTS |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
013280
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
05450
Uniform Freight Classification (UFC_CD_MODF_3040)
ALUM-BOLTS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| BBLB | Distance From First Radial Hole Center To End Of Bolt | 1.991 INCHES NOMINAL |
| BBLC | Distance From Second Radial Hole Center To End Of Bolt | 0.991 INCHES NOMINAL |
| AAQL | Body Style | BODY WRENCHING |
| AAWX | Concentric Hole Depth | 2.780 INCHES NOMINAL |
| AAXC | Concentric Hole Diameter | 0.234 INCHES NOMINAL |
| BBKQ | Fifth Diameter From Wrenching Feature | 0.499 INCHES NOMINAL |
| BBKL | First Diameter From Wrenching Feature | 0.499 INCHES NOMINAL |
| CQYM | First End Nominal Thread Size | 0.437 INCHES |
| ACLL | First End Thread Direction | RIGHT-HAND |
| ACLK | First End Thread Class | 3A |
| ATKZ | First End Thread Length | 0.325 INCHES NOMINAL |
| CQKK | First End Thread Quantity Per Inch | 20 |
| CQMM | First End Thread Series Designator | UNJF |
| BBKY | First Radial Fluid Hole Diameter | 0.189 INCHES NOMINAL |
| BBKP | Fourth Diameter From Wrenching Feature | 0.433 INCHES NOMINAL |
| MDCL | Material Document And Classification | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | ALUMINUM ALLOY 2024 |
| BBLD | Length From Bearing Surface Of Wrenching Feature To Bolt End | 2.531 INCHES NOMINAL |
| BBKX | Length From Bearing Surface Of Wrenching Feature To End Of Fifth Diameter | 2.094 INCHES NOMINAL |
| BBKR | Length From Bearing Surface Of Wrenching Feature To End Of First Diameter | 0.354 INCHES NOMINAL |
| BBKW | Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter | 1.726 INCHES NOMINAL |
| BBKS | Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter | 0.666 INCHES NOMINAL |
| BBKT | Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter | 1.354 INCHES NOMINAL |
| BBKM | Second Diameter From Wrenching Feature | 0.433 INCHES NOMINAL |
| ACLT | Second End Style Designator | FLARELESS |
| ACMR | Second End Thread Class | 3A |
| ACMS | Second End Thread Direction | RIGHT-HAND |
| ATLF | Second End Thread Length | 0.468 INCHES NOMINAL |
| CRPF | Second End Thread Series Designator | UNJF |
| CRMX | Second End Thread Quantity Per Inch | 16 |
| CRNB | Second End Nominal Thread Size | 0.750 INCHES |
| CRCN | Second End Seat Angle | 12.0 DEGREES NOMINAL |
| BBKZ | Second Radial Fluid Hole Diameter | 0.189 INCHES NOMINAL |
| ABHP | Overall Length | 3.530 INCHES NOMINAL |
| ASDB | Width Across Flats | 0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM |
| BBLF | Wrenching Feature Height | 0.437 INCHES NOMINAL |
| BBDF | Wrenching Feature Style | HEXAGON |
| SFTT | Surface Treatment | ANODIZE |
| BBKN | Third Diameter From Wrenching Feature | 0.499 INCHES NOMINAL |
Back to TopBack to Top
