Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
41003746 | 3 - Design Control Reference | 2 - Production Item | WOODWARD HRT, INC. | 81873 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
47 | 4730 | 010572127 | A121A0 | 18683 | X | M | 6 | A | N | U | 9 Mar 1978 |
Hose, Pipe, Tube, Lubrication, and Railing Fittings
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive - Reference Item Identification (Type 1A Concept)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZG01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4 | 3 | 2 | 2 | 9Z | D | 41003746 | 81873 | ![]() |
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
DLIS-K, Battle Creek, MI 49037-3084
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | AX | 0 | 14 Mar 1978 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
BBKK | Distance From Bolt End To Hole Center | 1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
BBLB | Distance From First Radial Hole Center To End Of Bolt | 0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
AAQL | Body Style | PLAIN |
AAWX | Concentric Hole Depth | 1.180 INCHES NOMINAL |
AAXC | Concentric Hole Diameter | 0.234 INCHES NOMINAL |
ADDV | Cotter Pin Hole Diameter | 0.060 INCHES NOMINAL |
BBKL | First Diameter From Wrenching Feature | 0.494 INCHES MINIMUM AND 0.496 INCHES MAXIMUM |
ACKM | First End Connection Type | THREADED EXTERNAL TUBE |
CQYM | First End Nominal Thread Size | 0.500 INCHES |
ACLK | First End Thread Class | 3A |
ACLL | First End Thread Direction | RIGHT-HAND |
ATKZ | First End Thread Length | 0.423 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
CQMM | First End Thread Series Designator | UNF |
CQKK | First End Thread Quantity Per Inch | 20 |
BBKY | First Radial Fluid Hole Diameter | 0.219 INCHES NOMINAL |
MATT | Material | STEEL CORROSION RESISTING |
BBLD | Length From Bearing Surface Of Wrenching Feature To Bolt End | 1.600 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
BBKR | Length From Bearing Surface Of Wrenching Feature To End Of First Diameter | 1.247 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
BBKS | Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter | 1.595 INCHES MINIMUM AND 1.615 INCHES MAXIMUM |
MDCL | Material Document And Classification | AMS5659 15-5PH ASSN STD SINGLE MATERIAL RESPONSE |
ABHP | Overall Length | 1.787 INCHES MINIMUM AND 1.807 INCHES MAXIMUM |
ASDB | Width Across Flats | 0.750 INCHES NOMINAL |
BBLF | Wrenching Feature Height | 0.167 INCHES MINIMUM AND 0.207 INCHES MAXIMUM |
BBDF | Wrenching Feature Style | HEXAGON |
STDC | Surface Treatment Document And Classification | QQ-P-416,TY 1,CL 2 FED SPEC 2ND TREATMENT RESPONSE |
SFTT | Surface Treatment | PASSIVATE OR CADMIUM |