| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS51852-11Z | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | |
| 8C6BU-S-ZGC | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PARKER-HANNIFIN CORPORATION | 30780 | |
| 676381 | 5 - Replaced / Discontinued | 2 - Production Item | DAF TRUCKS N.V. | H0001 | |
| C7506X8 | 5 - Replaced / Discontinued | 2 - Production Item | EATON-AEROQUIP INC | 01276 | |
| 8C6BU-S-ZGC | 5 - Replaced / Discontinued | 9 - No Longer Used | PARKER-HANNIFIN CORPORATION | 98441 | |
| C7506X8 | 5 - Replaced / Discontinued | 9 - No Longer Used | DANA CORP | 79470 | |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 47 | 4730 | 012286941 | A080B0 | 03771 | X | 1 | A | N | U | 20 Mar 1986 |
Hose, Pipe, Tube, Lubrication, and Railing Fittings
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2 | E | AX | D | MS51852-11Z | 96906 | | |||||
| 5 | 1 | E | AX | 8C6BU-S-ZGC | 30780 | | ||||||
| 4 | 5 | 2 | 1 | ZN | D | 676381 | H0001 | | ||||
| 5 | 2 | 5 | 9Z | D | C7506X8 | 01276 | | |||||
| 5 | 9 | 4 | 9Z | B | C7506X8 | 79470 | | |||||
| 5 | 9 | E | AX | B | 8C6BU-S-ZGC | 98441 | | |||||
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Netherlands
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
DLIS-K, Battle Creek, MI 49037-3084
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 20 Mar 1986 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZN |
Netherlands
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AHNC | Connection Style | FLARELESS (TUBE) 2ND END |
| AHNC | Connection Style | SWIVEL NUT, FLARELESS (SWIVEL NUT ATTACHMENT METHOD OPTIONAL) (TUBE) 1ST END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AWLS | Connection Type | THREADED EXTERNAL TUBE 2ND END |
| TMQY | Furnished Items And Quantity | 1 COUPLING NUT AND 1 TUBE COUPLING NUT |
| CRFY | Flow Angle | 90.0 DEGREES |
| MATT | Material | STEEL OVERALL |
| CWFD | Nominal Outside Diameter Tube Accommodated | 0.500 INCHES ALL ENDS |
| CQJX | Nominal Thread Size | 0.750 INCHES ALL ENDS |
| AHSJ | Leg Length | 1.409 INCHES MINIMUM 1ST END AND 1.529 INCHES MAXIMUM 1ST END |
| AHSJ | Leg Length | 1.220 INCHES MINIMUM 2ND END AND 1.280 INCHES MAXIMUM 2ND END |
| CQRB | Seat Angle | 12.0 DEGREES 1ST END |
| CQRB | Seat Angle | 12.0 DEGREES 2ND END |
| ZZZK | Specification/Standard Data | 96906-MS51852 GOVERNMENT STANDARD |
| SFTT | Surface Treatment | ZINC OVERALL |
| AAJD | Thread Class | 2A 2ND END |
| AAJD | Thread Class | 2B 1ST END |
| THSD | Thread Series Designator | UNF ALL ENDS |
| CMLP | Thread Quantity Per Inch | 16 ALL ENDS |