- FSG 52 - Measuring Tools
- FSC 5210 - Measuring Tools, Craftsmen's
- NSN 5210-01-368-4553
5210-01-368-4553
GAGE,THICKNESS
5210-01-368-4553 (5210013684553, 013684553)
Part Number (1 listing): 2424
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 2424 | 3 - Design Control Reference | 2 - Production Item | APEX TOOL GROUP, LLC | 636D0 |  |
| 2424 | 5 - Replaced / Discontinued | 9 - No Longer Used | EASCO HAND TOOLS INC | 08292 |  |
| 2424 | C - Advisory Reference | 1 - Incomplete Part Number | APEX TOOL GROUP, LLC | 636D0 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 52 | 5210 | 013684553 | T299-K | 05977 | X | 4 | 6 | A | N | A | 1 Dec 1992 |
T299-K
Federal Item Identification Guide (FIIG_4065)
05977
Item Naming Code (INC_4080)
1 Dec 1992
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C014 | 0 | 0 | 1 Apr 1991 | |||||||||||||||||||||||||||
| G751 | 0 | 0 | 1 Apr 1991 | |||||||||||||||||||||||||||
| MC14 | 0 | 0 | Z | PA | 1 Apr 1991 | |||||||||||||||||||||||||
| N9QG | 0 | 0 | Z | KE | GT | HD | 1 Apr 1991 | |||||||||||||||||||||||
0
Acquisition Method Code (AMC_2871)
Not Established
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
PA
Item Management Coding Activity (IMC_ACTY_2748)
Marine Corps Logistics Base, Albany, GA 31704-1128
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
75
Reference Number Action Activity Code (RNAAC_2900)
GSA, FSS/FCSC Washington, DC 20406
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 1 Dec 1992 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1992
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7G | 652 | Z | 9 | A | V | Z | F | 058240 | X | 33170 | RECORDING-DEVICES-GAUGES-METERS-NOI |
7G
Originating Activity Code (ORIG_ACTY_CD_4210)
GSA, FSS/FCSC Washington, DC 20406
652
Water Commodity Code (WRT_CMDTY_CD_9275)
Instruments, Scientific
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
F
Less Than Truckload (CLAS_RTNG_CD_2770)
150
058240
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
33170
Uniform Freight Classification (UFC_CD_MODF_3040)
RECORDING-DEVICES-GAUGES-METERS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DA | GSA | V | M | 0 | Z | EA | 0 | |
| DF | GSA | Y | U | 0 | N | EA | 0 | |
| DM | GSA | J | U | 0 | Z | EA | 0 | |
| DN | GSA | J | U | 0 | EA | 0 | ||
| GP | GSA | J | U | 0 | EA | 0 | ||
| TG | GSA | J | U | 0 | EA | 0 |
GSA
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
General Services Administration, Washington, D.C. 20406
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
M
Controlled Item Inventory Code (CIIC_2863)
Handtools and shop equipment
0
Quantity Unit Pack (QUP_6106)
No QUP
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DM
Service / Agency Code (MOE_CD_2833)
U.S. Marine Corps
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
GP
Service / Agency Code (MOE_CD_2833)
U.S. Coast Guard
TG
Service / Agency Code (MOE_CD_2833)
General Services Administration
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CNLG | Blade Group Quantity | 1 |
| AEAE | Blade Length | 3.312 INCHES NOMINAL |
| CNLH | Blade Lock | INCLUDED |
| AJLB | Blade Quantity | 22 |
| AJMH | Blade Shape | STRAIGHT |
| CPMW | Blade Thickness | 0.0040 INCHES AND 0.0060 INCHES 1ST BLADE |
| CPMW | Blade Thickness | 0.0060 INCHES AND 0.0080 INCHES 3RD BLADE |
| CPMW | Blade Thickness | 0.0070 INCHES AND 0.0090 INCHES 4TH BLADE |
| CPMW | Blade Thickness | 0.0050 INCHES AND 0.0070 INCHES 2ND BLADE |
| CPMW | Blade Thickness | 0.0090 INCHES AND 0.0110 INCHES 6TH BLADE |
| CPMW | Blade Thickness | 0.0080 INCHES AND 0.0100 INCHES 5TH BLADE |
| CPMW | Blade Thickness | 0.0110 INCHES AND 0.0130 INCHES 8TH BLADE |
| CPMW | Blade Thickness | 0.0120 INCHES AND 0.0140 INCHES 9TH BLADE |
| CPMW | Blade Thickness | 0.0100 INCHES AND 0.0120 INCHES 7TH BLADE |
| CPMW | Blade Thickness | 0.0140 INCHES AND 0.0160 INCHES 11TH BLADE |
| CPMW | Blade Thickness | 0.0130 INCHES AND 0.0150 INCHES 10TH BLADE |
| CPMW | Blade Thickness | 0.0160 INCHES AND 0.0180 INCHES 13TH BLADE |
| CPMW | Blade Thickness | 0.0170 INCHES AND 0.0190 INCHES 14TH BLADE |
| CPMW | Blade Thickness | 0.0150 INCHES AND 0.0170 INCHES 12TH BLADE |
| CPMW | Blade Thickness | 0.0190 INCHES AND 0.0210 INCHES 16TH BLADE |
| CPMW | Blade Thickness | 0.0200 INCHES AND 0.0220 INCHES 17TH BLADE |
| CPMW | Blade Thickness | 0.0180 INCHES AND 0.0200 INCHES 15TH BLADE |
| CPMW | Blade Thickness | 0.0220 INCHES AND 0.0240 INCHES 19TH BLADE |
| CPMW | Blade Thickness | 0.0230 INCHES AND 0.0250 INCHES 20TH BLADE |
| CPMW | Blade Thickness | 0.0210 INCHES AND 0.0230 INCHES 18TH BLADE |
| CPMW | Blade Thickness | 0.0250 INCHES AND 0.0270 INCHES 22ND BLADE |
| CPMW | Blade Thickness | 0.0240 INCHES AND 0.0260 INCHES 21ST BLADE |
| BDLS | Measurement System | ENGLISH |
| FEAT | Special Features | STEPPED BLADES |
Back to TopBack to Top
