Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS35241-36 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | |
133427 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | GENERAL MOTORS CORP | 24617 | |
12Z1013-203 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | NAVAL ORDNANCE STANDARDS | 94135 | |
133427 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | DAIMLER CHRYSLER | 12204 | |
BCKX1EF1 | 5 - Replaced / Discontinued | 9 - No Longer Used | ORDNANCE CORPS | 00000 |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 000133427 | A500D0 | 06657 | X | 1 | A | N | U | 1 Jan 1961 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Jun 1999 |
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | KZ | 0 | 1 | KZ | 0 | 6 Jun 1963 | 5305000594552 | 8 Oct 1965 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
U | 713 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
50
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
CRSQ | Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
AASB | Fastener Length | 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
AASL | Head Diameter | 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
AASK | Head Style | FLAT COUNTERSUNK |
CQBC | Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.138 INCHES |
ZZZT | Nondefinitive Spec/Std Data | I TYPE AND 2S STYLE |
ABQZ | Internal Drive Style | SLOT |
CYAU | Screw Material | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 |
CYAW | Screw Material Document And Classification | QQ-S-634 FED SPEC ALL MATERIAL RESPONSES |
CYBE | Screw Surface Treatment Document And Classification | QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE |
CYBA | Screw Surface Treatment | CADMIUM |
AAJD | Thread Class | 2A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 32 |
THSD | Thread Series Designator | UNC |