- FSG 53 - Hardware and Abrasives
- FSC 5305 - Screws
- NSN 5305-00-227-1149
5305-00-227-1149
SCREW,TAPPING
5305-00-227-1149 (5305002271149, 002271149)
Part Numbers (4 listings): AMSE-B18.6.4 | FF-S-107 | ANSIB18.6.4 | FF-S-107TYA |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| AMSE-B18.6.4 | 3 - Design Control Reference | 1 - Incomplete Part Number | AMERICAN SOCIETY OF MECHANICAL | 05047 |  |
| FF-S-107 | 5 - Replaced / Discontinued | 9 - No Longer Used | FEDERAL SPECIFICATIONS | 81348 |  |
| ANSI B18.6.4 | 5 - Replaced / Discontinued | 9 - No Longer Used | AMERICAN NATIONAL STANDARDS | 80204 |  |
| FF-S-107 TYA | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL SERVICES ADMINISTRATION | 80244 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 4 | 1 | 3 | 75 | D | FF-S-107 | 81348 | | ||||
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
4
Reference Number Category Code (RNCC_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
75
Reference Number Action Activity Code (RNAAC_2900)
GSA, FSS/FCSC Washington, DC 20406
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRGF | Nonmachine Thread Style | GIMLET POINT (TYPE A, AB OR BA) |
| CTYF | Nonmachine Nominal Thread Diameter | 0.151 INCHES |
| AASB | Fastener Length | 0.469 INCHES MINIMUM AND |
| AASB | Fastener Length | 0.531 INCHES MAXIMUM |
| MATT | Material | STEEL OVERALL |
| SFTT | Surface Treatment | CADMIUM AND |
| SFTT | Surface Treatment | CHROMATE OVERALL |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK | Head Style | PAN NO. 2 |
| AASL | Head Diameter | 0.264 INCHES MINIMUM AND |
| AASL | Head Diameter | 0.285 INCHES MAXIMUM |
| AASU | Head Height | 0.099 INCHES MINIMUM AND |
| AASU | Head Height | 0.111 INCHES MAXIMUM |
| ABQZ | Internal Drive Style | SLOT |
| CBBL | Features Provided | CASEHARDENED |
| ZZZT | Nondefinitive Spec/Std Data | A TYPE |
| SR-1 | Definitive Government Spec/Std Reference Or Manufacturers Code | |
| SR-1 | Definitive Government Spec/Std Reference Or Manufacturers Code | 81348 |
| SR-1 | Definitive Government Spec/Std Reference Or Manufacturers Code | FF-S-107 |
Back to TopBack to Top
