Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS35223-29 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | ![]() |
5952510 | 5 - Replaced / Discontinued | 2 - Production Item | TADIRAN LTD | S0522 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 008829554 | A500D0 | 06657 | X | 4 | 9 | A | N | U | 1 Jan 1962 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YW01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZN01 | 1 Jun 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
ZA01 | 1 Jan 2010 | |||||||||||||||||||||||||||||
YA01 | 1 Jan 2011 | |||||||||||||||||||||||||||||
YD01 | 1 Aug 2016 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 5 | 2 | 3 | ZG | D | 5952510 | S0522 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Germany
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | KZ | 1 | 1 | 9T | 0 | 1 Mar 1967 | 5305009844989 | 26 Jul 1968 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
DLIS, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
U | 713 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
50
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AASB | Fastener Length | 0.438 INCHES NOMINAL |
AASL | Head Diameter | 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
AASU | Head Height | 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
AASK | Head Style | PAN NO. 2 |
CQBC | Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.138 INCHES |
ABQZ | Internal Drive Style | SLOT |
CYAW | Screw Material Document And Classification | QQ-S-630 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-631 FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 17TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 18TH MATERIAL RESPONSE |
CYBE | Screw Surface Treatment Document And Classification | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
CYBA | Screw Surface Treatment | CADMIUM |
AAJD | Thread Class | 2A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.376 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
THSD | Thread Series Designator | UNC |
CMLP | Thread Quantity Per Inch | 32 |