Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
NAS1101C02-3 | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA FASTENING SYSTEMS | C4293 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | PLASTIC AND METAL PRODUCTS | 53606 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 27624 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | LISI AEROSPACE CANADA CORP | L4528 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | HI-SHEAR CORPORATION | 73197 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | EMHART TEKNOLOGIES LLC | 58998 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | HUCK INTERNATIONAL, INC. | 17446 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES LLC | 06725 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | QUALIFIED AIR COMPONENTS INC. | 30485 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 92215 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 80539 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | ERIKS SOUTHWEST INC | 30889 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 2 - Production Item | NOR-CAL SUPPLY CO.INC. | 07851 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 56878 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 | ![]() |
NAS1101C02-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | WALLACE R G CO | 08547 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 009289569 | A500D0 | 06657 | X | 1 | A | N | A | 0 | 2 Sep 1966 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZX01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
ZU01 | 1 Jul 1995 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
YD01 | 1 Oct 2016 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 4 | KZ | D | 3 | NAS1101C02-3 | 80205 | ![]() | |||
5 | 2 | 4 | KZ | NAS1101C02-3 | 80539 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 92215 | ![]() | ||||||
4 | 5 | 2 | 3 | ZG | A | NAS1101C02-3 | C4293 | ![]() | ||||
5 | 2 | 4 | ZZ | NAS1101C02-3 | L4528 | ![]() | ||||||
4 | 5 | 2 | 5 | 9Z | D | NAS1101C02-3 | 17446 | ![]() | ||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 27624 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 30485 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 30889 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 53606 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 06725 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 07851 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 58998 | ![]() | ||||||
5 | 2 | 4 | KZ | NAS1101C02-3 | 73197 | ![]() | ||||||
5 | 9 | 4 | KZ | B | NAS1101C02-3 | 08547 | ![]() | |||||
5 | 9 | 4 | KZ | B | NAS1101C02-3 | 56878 | ![]() | |||||
5 | 9 | 4 | KZ | B | NAS1101C02-3 | 97928 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
The additional items of production associated with the proposal have been reviewed and are correctly proposed as primary numbers to identify the item of supply. Time does not permit collaboration of these additional items of production.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Germany
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
USA
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
DLIS-K, Battle Creek, MI 49037-3084
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | 98 | 1 | 1 | 98 | 0 | 31 May 2001 | 5305002350312 | 31 May 2001 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
DLIS-LFF, Battle Creek, MI 49037-3084
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 713 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
DLA Troop Support, Philadelphia, PA 19111 ** No longer valid for input **
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Unclassified
No QUP
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
100
Department of the Army
Department of the Navy
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | 10 | 1 | YYY | 1.0 lbs | 0.010 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | A1 | D3 | E | Q | U | M |
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal.
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) Postal Regulations (b) Department of Transportation Regulations (c) Civil Air Regulations (d) Uniform Freight Classification Rules (e) National Motor Freight Classification Rules (f) American Truckers' Association Rules (g) Other applicable carriers' rules (h) Military Air Regulations for dangerous materials Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment. Shipments by parcel post must comply with Postal Regulations.
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AASB | Fastener Length | 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
CQFM | Hardness Rating | 248.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM |
AASL | Head Diameter | 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
AASU | Head Height | 0.044 INCHES MINIMUM AND 0.053 INCHES MAXIMUM |
AASK | Head Style | FLAT CHAMFER |
CQBC | Minimum Tensile Strength | 140000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.086 INCHES |
ABQZ | Internal Drive Style | TORQUE SET |
CYAW | Screw Material Document And Classification | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE |
CYAU | Screw Material | IRON ALLOY 660 |
CYBE | Screw Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
CYBA | Screw Surface Treatment | PASSIVATE |
ZZZK | Specification/Standard Data | 80205-NAS1101 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
AAJD | Thread Class | 3A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.121 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 56 |
THSD | Thread Series Designator | UNJC |