- FSG 53 - Hardware and Abrasives
- FSC 5305 - Screws
- NSN 5305-01-129-9034
5305-01-129-9034
SCREW ASSEMBLY,PANEL
5305-01-129-9034 (5305011299034, 011299034)
Part Numbers (5 listings): CS1026P06-3.5-2 | 965875-122C | FT1171-122 | CPRL7900-6-B-3.5 | 10115219 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| CS1026P06-3.5-2 | 3 - Design Control Reference | 2 - Production Item | EMHART TEKNOLOGIES LLC | 58998 |  |
| 965875-122C | 5 - Replaced / Discontinued | 2 - Production Item | RAYTHEON COMPANY | 82577 |  |
| FT1171-122 | 5 - Replaced / Discontinued | 2 - Production Item | FASTENER TECHNOLOGY CORP. | 58794 |  |
| CPRL7900-6-B-3.5 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 |  |
| 10115219 | 6 - Informative Reference | 9 - No Longer Used | PAEAEESIKUNTA | A486G | |
| CPRL7900-6-B-3.5 | C - Advisory Reference | 1 - Incomplete Part Number | HUCK INTERNATIONAL, INC. | 0HDW7 |  |
| CPRL7900-6-B-3.5 | C - Advisory Reference | 1 - Incomplete Part Number | HUCK INTERNATIONAL, INC. | 0HDW7 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6 - Informative Reference
Reference Number Category Code (DRN_2910)
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5305 | 011299034 | A003B0 | 33044 | X | 1 | A | N | A | 14 Apr 1982 |
A003B0
Federal Item Identification Guide (FIIG_4065)
33044
Item Naming Code (INC_4080)
14 Apr 1982
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| YW01 | 1 Aug 1997 | |||||||||||||||||||||||||||||
| N9BZ | N9ZD | 3 | D | Z | KE | GT | KE | 1 Sep 2005 | ||||||||||||||||||||||
| WF01 | 1 Apr 2009 | |||||||||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
D
Acquisition Method Suffix Code (AMSC_2876)
The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | A | ZZ | CS1026P06-3.5-2 | 58998 | | ||||||
| 5 | 2 | 5 | KZ | 965875-122C | 82577 | | ||||||
| 5 | 2 | 5 | KZ | FT1171-122 | 58794 | | ||||||
| 5 | 9 | 5 | KZ | B | CPRL7900-6-B-3.5 | 97928 | | |||||
| 4 | 6 | 9 | 9 | WF | B | 10115219 | A486G | | ||||
| C | 1 | 5 | ZZ | 9F | CPRL7900-6-B-3.5 | 0HDW7 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
6
Reference Number Category Code (RNCC_2910)
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
9
Document Availability Code (DAC_2640)
The reference number is of the type for which an indication of document availability is not required.
WF
Reference Number Action Activity Code (RNAAC_2900)
Finland
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 14 Apr 1982 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
14 Apr 1982
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | 713 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
093486
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
48950
Uniform Freight Classification (UFC_CD_MODF_3040)
BOLTS-NUTS-OR-SCREWS--NOI--SUB-3-
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 42 | 1 | AAA | 0.1 lbs | 0.001 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | D3 | 00 | E | Q | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
42
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Container, watervaporproof bag, sealed, container
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.1 lbs
Unit Pack Weight (UP_WT_5153)
0.001 cu ft
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AASB | Fastener Length | 0.583 INCHES MINIMUM AND 0.613 INCHES MAXIMUM |
| AASU | Head Height | 0.077 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| AASL | Head Diameter | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AASK | Head Style | PAN |
| MDCL | Material Document And Classification | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MDCL | Material Document And Classification | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| MATT | Material | STEEL COMP 302 FASTENER |
| MATT | Material | STEEL COMP 301 PRIMARY WASHER |
| MATT | Material | STEEL COMP 304 STAND-OFF |
| CQBC | Minimum Tensile Strength | 112000 POUNDS PER SQUARE INCH |
| AHYM | Nominal Thread Diameter | 0.138 INCHES |
| ABQZ | Internal Drive Style | CROSS RECESS TYPE 1 |
| AGSM | Material Accommodated Thickness | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MDCL | Material Document And Classification | ASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| SFTT | Surface Treatment | PASSIVATE FASTENER |
| SFTT | Surface Treatment | PASSIVATE PRIMARY WASHER |
| SFTT | Surface Treatment | PASSIVATE STAND-OFF |
| AAJD | Thread Class | 3A |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNC |
| CMLP | Thread Quantity Per Inch | 32 |
Back to TopBack to Top
