- FSG 53 - Hardware and Abrasives
- FSC 5305 - Screws
- NSN 5305-01-130-9024
5305-01-130-9024
SCREW ASSEMBLY,PANEL
5305-01-130-9024 (5305011309024, 011309024)
Part Numbers (3 listings): PSS7900-6-A-3 | 951349-1 | PSS7900-6F-A-3 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| PSS7900-6-A-3 | 3 - Design Control Reference | 2 - Production Item | HUCK INTERNATIONAL, INC. | 17446 |  |
| 951349-1 | 5 - Replaced / Discontinued | 2 - Production Item | FASTENER TECHNOLOGY CORP. | 58794 |  |
| 951349-1 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 29372 |  |
| PSS7900-6F-A-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 |  |
| 951349-1 | 7 - Vendor Item Drawing Reference | 2 - Production Item | NORTHROP GRUMMAN GUIDANCE AND | 06481 |  |
| PSS7900-6F-A-3 | C - Advisory Reference | 1 - Incomplete Part Number | HUCK INTERNATIONAL, INC. | 0HDW7 |  |
| PSS7900-6F-A-3 | C - Advisory Reference | 1 - Incomplete Part Number | HUCK INTERNATIONAL, INC. | 0HDW7 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5305 | 011309024 | A003B0 | 33044 | X | 4 | 9 | A | N | A | 30 Apr 1982 |
A003B0
Federal Item Identification Guide (FIIG_4065)
33044
Item Naming Code (INC_4080)
30 Apr 1982
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
9
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| A919 | A187 | 1 | C | Z | BF | CL | 1 Jun 2005 | |||||||||||||||||||||||
| N9BZ | N9ZD | 1 | C | Z | KE | GT | KE | 1 Jun 2005 | ||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
BF
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
CL
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | PSS7900-6-A-3 | 17446 | | ||||||
| 5 | 2 | 5 | ZZ | 951349-1 | 29372 | | ||||||
| 5 | 2 | 5 | ZZ | 951349-1 | 58794 | | ||||||
| 5 | 9 | 2 | KZ | PSS7900-6F-A-3 | 97928 | | ||||||
| 7 | 2 | 2 | KZ | 951349-1 | 06481 | | ||||||
| C | 1 | 5 | ZZ | 9F | PSS7900-6F-A-3 | 0HDW7 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9F
Service / Agency Designator Code (SADC_4672)
CAGE Status Change
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 30 Apr 1982 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
30 Apr 1982
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | 713 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
093486
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
48950
Uniform Freight Classification (UFC_CD_MODF_3040)
BOLTS-NUTS-OR-SCREWS--NOI--SUB-3-
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.1 lbs | 0.001 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | D3 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.1 lbs
Unit Pack Weight (UP_WT_5153)
0.001 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AASB | Fastener Length | 0.375 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| AASU | Head Height | 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AASL | Head Diameter | 0.365 INCHES MAXIMUM |
| AASK | Head Style | PAN |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MDCL | Material Document And Classification | QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING |
| MATT | Material | STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 385 OVERALL |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| AHYM | Nominal Thread Diameter | 0.138 INCHES |
| AGSM | Material Accommodated Thickness | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| SFTT | Surface Treatment | PASSIVATE FASTENER |
| SFTT | Surface Treatment | PASSIVATE SPRING |
| SFTT | Surface Treatment | PASSIVATE STAND-OFF |
| AAJD | Thread Class | 2A |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNC |
| CMLP | Thread Quantity Per Inch | 32 |
Back to TopBack to Top
