Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
K86K0002-2 | 3 - Design Control Reference | 2 - Production Item | SOUTHCO INC. | 94222 | ![]() |
K86K0002-2 | 3 - Design Control Reference | 2 - Production Item | HUCK INTERNATIONAL, INC. | 17446 | ![]() |
DSHA7950-10-B-3.250 | 3 - Design Control Reference | 2 - Production Item | HUCK INTERNATIONAL, INC. | 0HDW7 | ![]() |
K86K0002-2 | 3 - Design Control Reference | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 29372 | ![]() |
K86K0002-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | SAFETY SOCKET LLC | 82896 | ![]() |
K86K0002-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | MCDONNELL DOUGLAS CORP | 12464 | ![]() |
DSHA7950-10-B-3.250 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 | ![]() |
10115380 | 6 - Informative Reference | 9 - No Longer Used | PAEAEESIKUNTA | A486G | ![]() |
K86K0002-2 | 7 - Vendor Item Drawing Reference | 9 - No Longer Used | MCDONNELL DOUGLAS CORP | 19133 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 011356780 | A003B0 | 33044 | X | 4 | 9 | A | N | A | 0 | 28 Jul 1982 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YW01 | 1 Aug 1997 | |||||||||||||||||||||||||||||
N9BZ | N9ZD | 1 | C | Z | KE | GT | KE | 1 Apr 2006 | ||||||||||||||||||||||
WF01 | 1 May 2009 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Naval ICP, Philadelphia, PA 19111
Naval ICP, Philadelphia, PA 19111
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | ZZ | DSHA7950-10-B-3.250 | 0HDW7 | ![]() | ||||||
3 | 2 | 1 | ZZ | K86K0002-2 | 17446 | ![]() | ||||||
3 | 2 | 1 | ZZ | K86K0002-2 | 29372 | ![]() | ||||||
3 | 2 | 1 | ZZ | K86K0002-2 | 94222 | ![]() | ||||||
5 | 9 | 2 | KZ | B | DSHA7950-10-B-3.250 | 97928 | ![]() | |||||
5 | 9 | 2 | KZ | B | K86K0002-2 | 82896 | ![]() | |||||
5 | 9 | 2 | KZ | K86K0002-2 | 12464 | ![]() | ||||||
4 | 6 | 9 | 9 | WF | B | 10115380 | A486G | ![]() | ||||
7 | 9 | 2 | ZZ | K86K0002-2 | 19133 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
The reference number is of the type for which an indication of document availability is not required.
Finland
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 28 Jul 1982 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 713 | Z | 9 | A | B | Z | U | 093490 | X | 50270 | BOLT-NUT-SCREW-CLIPS-FASTENER-ETC |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
50
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 10 | 1 | AAA | 0.1 lbs | 0.007 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | 10 | D3 | 00 | E | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
Any suitable container included in this table may be used (see J.4.9.1).
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
No special marking
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AASB | Fastener Length | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM |
AASU | Head Height | 0.187 INCHES NOMINAL |
AASL | Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
AASK | Head Style | FLAT CHAMFER |
MDCL | Material Document And Classification | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
MDCL | Material Document And Classification | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES SECONDARY WASHER |
MATT | Material | ALUMINUM ALLOY 6061 STAND-OFF |
MATT | Material | STEEL COMP 302 FASTENER OR STEEL COMP 303 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 316 FASTENER |
MATT | Material | STEEL COMP 301 PRIMARY WASHER OR STEEL COMP 302 PRIMARY WASHER OR STEEL COMP 302B PRIMARY WASHER OR STEEL COMP 303 PRIMARY WASHER OR STEEL COMP 303SE PRIMARY WASHER OR STEEL COMP 304 PRIMARY WASHER OR STEEL COMP 304L PRIMARY WASHER OR STEEL COMP 305 PRIMARY WASHER OR STEEL COMP 308 PRIMARY WASHER OR STEEL COMP 309 PRIMARY WASHER OR STEEL COMP 309S PRIMARY WASHER OR STEEL COMP 310 PRIMARY WASHER OR STEEL COMP 310S PRIMARY WASHER OR STEEL COMP 314 PRIMARY WASHER OR STEEL COMP 316 PRIMARY WASHER OR STEEL COMP 316L PRIMARY WASHER OR STEEL COMP 317 PRIMARY WASHER OR STEEL COMP 321 PRIMARY WASHER OR STEEL COMP 347 PRIMARY WASHER OR STEEL COMP 348 PRIMARY WASHER OR STEEL COMP 384 PRIMARY WASHER OR STEEL COMP 385 PRIMARY WASHER |
MATT | Material | STEEL COMP 301 SECONDARY WASHER OR STEEL COMP 302 SECONDARY WASHER OR STEEL COMP 304 SECONDARY WASHER OR STEEL COMP 304L SECONDARY WASHER OR STEEL COMP 305 SECONDARY WASHER OR STEEL COMP 309 SECONDARY WASHER OR STEEL COMP 310 SECONDARY WASHER OR STEEL COMP 316 SECONDARY WASHER OR STEEL COMP 316L SECONDARY WASHER OR STEEL COMP 321 SECONDARY WASHER OR STEEL COMP 323 SECONDARY WASHER OR STEEL COMP 347 SECONDARY WASHER OR STEEL COMP 348 SECONDARY WASHER |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
AGSM | Material Accommodated Thickness | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
MDCL | Material Document And Classification | 66 FED STD ALL MATERIAL RESPONSES FASTENER |
MDCL | Material Document And Classification | 66 FED STD ALL MATERIAL RESPONSES PRIMARY WASHER |
FEAT | Special Features | COLOR BLACK |
STDC | Surface Treatment Document And Classification | 595 NO 37038 FED STD SINGLE TREATMENT RESPONSE STAND-OFF |
STDC | Surface Treatment Document And Classification | MIL-C-13924 CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER |
STDC | Surface Treatment Document And Classification | MIL-C-13924 CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER |
STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
SFTT | Surface Treatment | OXIDE FASTENER |
SFTT | Surface Treatment | OXIDE SECONDARY WASHER |
SFTT | Surface Treatment | PAINT STAND-OFF |
SFTT | Surface Treatment | PASSIVATE PRIMARY WASHER |
AAJD | Thread Class | 3A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
THSD | Thread Series Designator | UNF |
CMLP | Thread Quantity Per Inch | 32 |