Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS8000K840CA | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | |
124F002-12CR0840 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PARKER-HANNIFIN CORPORATION | 98441 | |
TR50206CC12-0840 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | PARKER-HANNIFIN CORPORATION | 50599 | |
STD24FF840C000 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 99193 | |
0-001-010-60 REVD PC028 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HONEYWELL INTERNATIONAL INC. | 99193 | |
13000212-0840S | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SMITHS TUBULAR SYSTEMS-LACONIA, INC. | 78570 |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
47 | 4720 | 011957052 | A542A0 | 20311 | X | 4 | 3 | A | N | A | 1 Dec 1984 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZH01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
2 | 2 | E | AX | MS8000K840CA | 96906 | |||||||
5 | 1 | E | AX | 124F002-12CR0840 | 98441 | |||||||
5 | 1 | 6 | AX | 0-001-010-60 REVD PC028 | 99193 | |||||||
5 | 1 | E | AX | STD24FF840C000 | 99193 | |||||||
5 | 1 | E | AX | TR50206CC12-0840 | 50599 | |||||||
5 | 1 | E | AX | 13000212-0840S | 78570 |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Columbus, Columbus, OH 43216-5000
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 1 Dec 1984 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AX | 736 | Z | 9 | A | B | Z | W | 051140 | Z | 52350 | HOSE-NOI-TUBING |
Defense Supply Center Columbus, Columbus, OH 43216-5000
Plumbing Supplies
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
DLA Land and Maritime, Columbus, OH 43215 ** No longer valid for input **
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
A | P | AE | 1 | AAA | 7.0 lbs |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | 00 | ED | Q | Q | O |
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
Primary Inventory Control Activity (PICA)
Seal or plug all openings and preserve by Method 10.
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
No requirement.
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AKUU | End Connection Design | ELBOW 2ND END |
AKUU | End Connection Design | STRAIGHT 1ST END |
CQBD | Burst Test Pressure | 5000.0 POUNDS PER SQUARE INCH |
AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
AHNC | Connection Style | SWIVEL NUT FLARE 2ND END |
AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
AAGR | Cross-Sectional Shape Style | ROUND |
CBBL | Features Provided | REUSABLE END FITTINGS |
CRFY | Flow Angle | 90.0 DEGREES 2ND END |
CQGM | Maximum Operating Pressure | 1000.0 POUNDS PER SQUARE INCH |
CRXX | Measuring Method And Length | 84.000 INCHES NOMINAL WORKING |
CQJX | Nominal Thread Size | 1.062 INCHES 1ST END |
CQJX | Nominal Thread Size | 1.062 INCHES 2ND END |
AARX | Inside Diameter | 1.062 INCHES NOMINAL |
CRWL | Inside Surface Condition | SMOOTH |
CQCS | Layer Composition And Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
CQRB | Seat Angle | 37.0 DEGREES 1ST END |
CQRB | Seat Angle | 37.0 DEGREES 2ND END |
SUPP | Supplementary Features | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 99193 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
AAJD | Thread Class | 3B 1ST END |
AAJD | Thread Class | 3B 2ND END |
AAJF | Thread Direction | RIGHT-HAND 1ST END |
AAJF | Thread Direction | RIGHT-HAND 2ND END |
THSD | Thread Series Designator | UNJ 1ST END |
THSD | Thread Series Designator | UNJ 2ND END |
CMLP | Thread Quantity Per Inch | 12 1ST END |
CMLP | Thread Quantity Per Inch | 12 2ND END |